Infant Radiant Warmer Dealers in Pune

• Dimesnions: 85 cms(L) x70 cms(W)x185 cms(H)
• Weight: 70 Kgs (nice 2010BC)
• Mattress: 73 cms (L) x 53 cms (W) x 5 cms (H)
• Mattress from floor: 95 cms
• Maximum load: 10 Kgs
• Side panels: Aluminum hinged acrylic panels
• Maximum load for monitor shelf: 4.5 Kgs
• Heater module swivel: ±90 Degree

Features: Micro Controller based Electronics Controls - Servo Skin/ Apgar Pre-warm - Use the equipment with 30% Heater Output in Manual Mode. Programmable Mute time No need of calibration required for temperature probe. High Intensity Quartz Heating element for effective Radiation (Ceramic heater Optional) Halogen Observation Lamp The Heater Module rotates 90° to both sides to facilitate X-Ray Procedures. The Parabolic Reflector is designed to send uniform heat to the bed surface. Memory Backup to restore set temperature and previous mode, in case of power failure. Optimum Bed dimensions ensure optimum work space for the nursing staff. Comprehensive Alarms and safety cut-offs. Alert (Alarm) when sensor is detached from the patient's skin (optional) Instant Warming and Uniform heating   Controller Electronics : High speed micro controller Mode of operation : Servo skin, manual & apgar Skin mode control range : 30 Deg. C to 38 Deg. C Manual mode timer : 1 min to 15 mins (selectable), 15 mins to 30 mins (optional) Apgar timer : Alerts at 1, 5, 10, 15 & 20 mins (selectable) Percentage of heater output : 10% to 100% in 10% increments Memory back up : Equipment restores the previous settings Programmable mute time : User can select the mute time Safety heater cut off : If the skin sensor is removed from the baby's skin Over temperature heater cut off : If the skin temperature is >39 Deg. C in any skin/manual mode Temperature sensor (probe) : Thermistor sensor Accuracy of skin sensor : ±0.1 C Accuracy of skin probe Interchangeability : 0.2 C Calibration of skin sensor (probe) : No need of calibration after Changing new probe Heater element : Quartz Infrared heater Ceramic heater (optional) Other Details Power rating : 230V AC, 50Hz, 700 W Maximum heater wattage : 600 Watts Maximum power requirement : 700 Watts Examination light : 12V, 50W Halogen lamp X-ray facility : Underneath the bed Mattress tilt : ±30 degrees on both sides IV pole : Maximum load 2.2 Kg Pump mounting pole : Maximum load 2.2 Kg Castor : 4” castors 4 Nos. (2 with brake & 2 without brake Monitor shelf : 2 Nos. Fixed Height adjustable heater module : Available only in nice 2010 Cabinet : Available only in nice 2010BC Operating noise level : <50 dBA Controller Alarms: Check patient If the skin sensor is removed from the baby's skin Skin temperature high > 1.0 C from the set temperature Skin temperature low < 1.0 C from the set temperature Skin temperature probe fail Probe short or open Over temperature If skin temperature is 39 C Heater fail Heater defect System fail Electronic component defect Power fail AC power interruption Environmental Operating temperature - 15° C to 35° C Storage temperature - -20° C to 60° C Operating humidity - 5% to 90% RH, non condensing Storage humidity - 0% to 99% RH, non condensing Altitude - Sea level to 1-9 miles, 3 Km Quality - ISO 9001:2000 & ISO 13485:2003 Electrical & product safety - IEC 60601-1, IEC 60601-1-2, IEC 60601-1-4, IEC 60601-2-21