Plastic Injection Molding Machine Dealers in Pune

• Color: Grey
• Voltage: 220V
• Shaping Mode: Plastic Injection
• Warranty: 1 Year
• Clamping Force: 1100-1500kn
• Operation Mode: Automatic
• Power: 1-3kw

We are a well-known manufacturer, exporter and supplier of Thin Wall Injection Moulding Machine based in Pune, Maharashtra. The machine has a barrel screw and high speed injection. The unit also has a five point double toggle clamping mechanism. This machine saves energy and produces less noise. The reliable design ensures consistent performance. The machine can be built to customer specifications. Please contact us for competitive pricing and timely deliveries.   Machine Features : Barrel Screw for Better Mixing High Speed Injection 5 point Double Toggle mechanism of clamping unit “T” slot plattens                Generous specifications Servo Motor + Gear pump (For Futura Only) Low power consumption Low noise level Less cooling water requirement Reliable design Consistent operations Customer specific machine   Applications : Caps & Closures Thin wall container

• Type: Injection Molding Equipment
• Certification: CE Certified
• Weight: 100-1000kg
• Color: Grey
• Voltage: 110V
• Power: 1-3kw
• Automation: Automatic
• Driven Type: Electric

Leveraging upon our efficient team of procurement agents, we have acquired a foremost position in the Indian and international markets as the Exporter and Supplier of the Injection Molding Machines of the best kind. When tested on parameters like strength, durability, functionality, energy-efficiency etc., these Machines excelled. In our stock, there are present the Injection Molding Machines in plenty of specification, which are obtainable at rational prices.

Vertical injection molding machine rang from 15 tons to 650 tons.

We are Distinctly Recognized amongst Leading Hydraulic Injection Molding Machine Manufacturers and Exporters Located in India. with Selection of Differentiated Hydraulic System and Electric System, Even a Beginner Can Easily Operate Our Injection Molding Machine. Using Touch Screen, It Can Set Up Easily the Temperature Condition and Time Etc. At Each Mold Giving the Number to Each Mold. Remained Quantity of Rubber Maintains the Condition of Immature Molding By Cooling Up to the Nozzle Range. as Heater Single Line Equipment is Installed Inside, It’s Possible to Check Whether Each Heater Line is Cut or Not and Whether Heater Operates Right or Not. It’s Easy to Replace the Mold Thanks to the Ball Transfer, Installed in the Low Heat Plate. By L.m Bearing, Fixed in Slide, It Can Work Smoothly. Our Injection Molding Machine is Available On Rock Bottom Rates. features : with Selection of Differentiated Hydraulic System and Electric System, Even a Beginner Can Operate It Easily. Using Touch Screen, It Can Set Up Easily the Temperature Condition and Time Etc. At Each Mold Giving the Number to Each Mold. Remained Quantity of Rubber Maintain the Condition of Immature Molding By Cooling Up to the Nozzle Range. as Heater Single Line Equipment are Installed Inside, It’s Possible to Checkwhether Each Heater Line is Cut or Not and Whether Heater Operate Right or Not. It’s Easy to Replace the Mold Thanks to the Ball Transfer, Installed in the Low Heat Plate. By L.m Bearing, Fixed in Slide, It Can Work Smoothly. to Save the Power Cost and for the Precise Control, It Applied the Electronic Proportion Control System.

• Clamping Force: 100-300 ton
• Plastic Type: PP, PE, PET, ABS, PA, All Engineering Plastic
• Automation Grade: Automatic
• Operation Mode: Automatic
• Condition: New
• Clamping Way: Hydraulic
• Clamping Force (Ton): 125 Tons
• Machine Weight (Ton): 4 Tons
• Phase: Three Phase
• Structure: Horizontal
• Orientation: Horizontal
• Capacity (Kilogram/Hour): 54 / 87 / 123 kgs/hr.
• Machine Structure: Horizontal
• Oil tank capacity (Litre): 210 Litres
• Warranty (month): Standard 12 month
• Number Of Phases: 3 Phase
• Power (kw): 27.2 kW
• Pump Driving Motor (hp): 18.2 kW
• Raw Material: HDPE, PE, PP, PS, PMMA, All Engineering Plastics
• Voltage (V): 415 V
• Number Of Tie Bars: 4
• Opening Stroke (mm): 395 mm
• Place Of Origin: Ahmedabad
• Cooling Water Consumption (L per min): 65 LPM
• Screw Stroke: 198 mm
• Screw Diameter: 40 , 45, 50 mm
• Locating Ring Diameter: 75 mm
• Servo Motor: 11 Kw
• Ejector Stroke: 150 mm
• Ejector Force: 45 Kn
• Total Connected Load: 18.8 Kw
• Injection Capacity: 231, 305, 377 gms
• Machine Dimension: 4.76 x 1.2 x 1.7 m
• Water Requirement: 85 LPM
• Plasticizing Rate: 15, 24, 34 g/s
• Injection Pressure: 1668 , 1333, 1080 bar
• Injection Rate: 106, 134, 165 cm/s
• Clamp Stroke: 395 mm
• Screw Speed: 240 rpm
• Total Heating Capacity: 9 kw
• Maximum Day Light: 845 mm
• Minimum Mold Height: 180 mm
• Tie Bar Distance: 430 x 430 mm
• Minimum Order Quantity: 1 Unit

• Raw Material: HDPE
• Clamping Force: 0-100 ton
• Phase: Three Phase
• Brand Name: TOYO All Electric/Szlz
• Condition: New
• Automation Grade: Automatic
• Orientation: Vertical

Detailed introduction: Introduction of the traditional conditions of injection molding machines: In the injection molding machine is carries on after all kinds of plastic the heating, melts the melt, the agitation, turbo-charged, the plastic fluid pours into the mold to file an accusation, completes a work piece injection molding the equipment.Consuming energy: Matched molds. Mode locking. Shoots the rubber. Sol. Guarantees the pressure. Cooling. The die sinking and so on several stages need the different pressure and the current capacity, but the oil pump electrical machinery in the constant speed revolution, creates the energy waste. The craft is unreasonable: The different working procedure oil pump's rotational speed is the same, has not been able to real-time change electrical machinery rotational speed because of the technological requirement. The work piece service life is short: The injection molding machine oil temperature is high. The noise is big. The service life of the machinery and the seal lessens under the most tremendous pressure and the current capacity.The electrical machinery protection is insufficient: The electric motor frequent line start, the electric current is big, the life lessens, simultaneously bring big pollution to electrical network. The main performance According to rapid starts and stops of the injection molding machine , the design of large over - flow multiples has greatly strengthened theovercurrent overload capacity of the motor; Asynchronous space vector PWM, Section steeples synchronous space vector PWM , two-phase optimization of the space vector PWM ; The output frequency and output current can be adjusted individually , output a perfect sinusoidal current waveform , the power factor above 0.95 ; Realize low frequency (1Hz) large output torque control under V / F control mode, automatic torque boost function ; Before the inverter starts automatically pursue the motor speed ; Using electricity / energy running into control mode in order to avoid affecting the normal production when break down ; 15 object of the operation monitoring , multi-angle dynamic monitoring machine operation. Application: all kinds of plastic extrusion equipment

• Power: up to 50 KW.
• Rated RPM range: 1500 - 3000

Mark Elektriks offers an Energy efficienct Servo Motors for pump for Injection Moulding, presses and hydraulic machines. Servo pumps (servo motor + pump) combine the advantages of hydraulic power transmission and an electrically controlled power actuator. By enabling optimal energy usage in the partial load range. Mark Elektriks offers energy-efficient and cost-effective Injection moulding servo motors for power outputs up to 50 KW. “MARK” PERMANENT MAGNET BRUSHLESS AC SERVO MOTORS (Injection moulding servo motors) when integrated with pump and controller, can be connected to your machine with ease. This allows you to significantly reduce the energy consumption of your injection moulding machine.

Injection Molding Machine, blown film extrusion machine

used injection molding machines, Injection Molding Machines

used injection molding machine, drip irrigation fitting, gear knobs

Plastic is known to be a very versatile and economical material that is used in many applications. Plastic injection molding is the primary process for manufacturing plastic products. We are a prominent Plastic Injection Molding Machine Supplier in Chinchwad, Maharashtra. We provide Plastic Injection Molding Machine that is made utilizing advanced methodologies that ensure low cost of production. The Plastic Injection Molding Machine that we offer is ideal for varied complex applications for injection molded plastic parts in medical and pharmaceutical products and packaging components, including : Blood Collection TubesCrutch HandlesDisposable Hospital ContainersBedpansDrinking CupsWater PitchersIce BucketsIV PartsMedicine Bottles / CapsPill Inspector TraysSpecimen CupsSyringesVials

injection blow molding machine, bakelite moulding machine

Vertical Injection Molding Machine, wire harness connector

injection mold making machine, U Clips for Hangers, Battery Terminal

Vertical Injection Moulding Machine

toggle injection molding machine, Toggle Molding Machines

Injection Molding Machine, Molding Machine, plastic molding machine

Injection Moulding Machines, auxiliary equipments

injection moulding machinery, Injection Moulding

Injection Molding Machine, Plastic Automotive Parts

Injection Moulding Machines, Plastic Injection Moulding

injection plastic molding machine, container door gasket material

Injection Moulding Machines, Press Tools, Injection Molded Plastic

Plastic Injection Moulding Machine, Plastic Injection Molding Machine

Plastic Injection Molding Machine

injection moulding machinery

plastic injection moulded machine, Bar Bending Machine, Water Vending Machine

Injection Moulding Machine, blow injection molding articles

used plastic injection moulding machine, Plastic Raw Material