Vibrating Fork Level Switch
15,000 - 45,000 Per Piece
1 Piece(s) (MOQ)
Application area : Liquids [density: > 0.5 … 2.5 g/cm³ (0.018 … 0.09 lbs/in³)] : The VEGASWING 51 is a universal level switch with small dimensions for use in liquids. Independent of the mounting position, it detects reliably with millimetre accuracy the limit level. The instrument can be used as empty or full detector, as approved overfill protection, dry run protection or pump protection in vessels and pipelines. The VEGASWING 51 is an economical solution with maximum reliability and safety.Function : The heart of the sensor is the vibration drive by which the tuning fork is energized to vibrate at its resonance frequency. When covered with medium, the frequency of the fork decreases. This frequency change is processed by the integrated electronics and converted into a switching command. With the tuning fork with only 38 mm length, the VEGASWING work reliably independent of the installation position in any liquid. Pressure, temperature, foam, viscosity and the composition of the liquid do not influence the switching accuracy.Your benefit Precise and reliable function due to product-independent switching point Low maintenance costs Minimum time and cost expenditure thanks to simple setup without medium Materials : The wetted parts of the instrument are made of stainless steel 316L. The supplied process seal is made of Klingersil C-4400Housing versions : The instruments are available in different temperature versions and as hygienic version. The housing is made of 316L and plastic PEI. The different versions are available up to protection IP 67. Electronics versions The instruments are available in two different electronics versions. Apart from the electronics with transistor output (PNP), a version with contactless electronic switch is also available. Operation : No adjustments on the instrument are necessary. The switching function is determined by the electrical connection. Version Standard Extended temperature range Hygienic applications Hygenic-fittings Clamp ≥ 1" - DIN32676, ISO2852 Slotted nut ≥ DN25 - DIN 11851 Hygienic fitting F40 with compression nut SMS DN38 Housing-material Plastic Stainless steel Protection-rating IP 67 IP 65 IP 68 (0.2 bar) Output Contactless electronic switch Transistor (NPN/PNP)
...moreBattery Operated Ultrasonic Flow Meter
35,000 Per Piece
1 Piece (MOQ)
Country of Origin : India
Display : Digital
Radar Level Trasmitter
68,000 - 128,000 Per Piece
1 Piece (MOQ)
Application area : The VEGAPULS 64 is a sensor for continuous level measurement of liquids. With small tanks or in case of narrow space the small process fittings offer special advantages. The very good signal focusing enables the use in vessels with many installations such as e.g. stirrers and heating spirals.Your benefit Exact measuring results independent of process conditions High plant availability, because wear and maintenance-free Maintenance-free operation through non-contact measuring principle Function : The sensor emits a continuous radar signal through the antenna. The emitted signal is reflected by the medium and received as an echo by the antenna. The frequency difference between the emitted and received signal is proportional to the distance and depends on the filling height. The determined filling height is converted into a respective output signal and outputted as measured value.Version With plastic horn antenna ø 80 mm Thread with integrated horn antenna Flange with encapsulated antenna system Hygienic fitting with encapsulated antenna system Materials : The wetted parts of the instrument are made of 316L, PP, PTFE or PEEK. The process seal is made of FKM, FFKM, EPDM or PTFE.Housing versions : The housings are available as single chamber or double chamber version in plastic, stainless steel or aluminium. They are available with protection ratings up to IP 68 (1 bar). Electronics versions : The instrument is available with electronics 4 - 20 mA/HART as well as HART and power pack.Adjustment Adjustment on the measurement loop : The adjustment of the instrument is carried out via the optional display and adjustment module PLICSCOM or via a PC with the adjustment software PACTware and corresponding DTM. Wireless adjustment via Bluetooth : The Bluetooth version of display and adjustment module enables a wireless connection to standard adjustment units. This can be smartphones/tablets with iOS or Android operating system or PCs with PACTware and Bluetooth USB adapter. Adjustment is hence carried out via a free-of-charge app from the Apple App Store or the Google Play Store or the adjustment software PACTware and respective DTM. Adjustment via remote systems : Further adjustment options are possible via a HART Communicator as well as manufacturer-specific programs such as AMS™ or PDM. Materials, wetted-parts PFA PTFE 316L Alloy C22 (2.4602) PEEK Hygenic-fittings Clamp ≥ 2", DN50 - DIN32676, ISO2852 Slotted nut ≥ 2", DN50 - DIN 11851 DRD connection ø 65 mm for NEUMO BioControl D50 PN16 / 316L Seal-material EPDM FKM FFKM Housing-material Plastic Aluminium Stainless steel (precision casting) Stainless steel (electropolished) Protection-rating IP 66/IP 68 (0.2 bar) IP 66/IP 67 IP 66/IP 68 (1 bar)
...moreLiquid and Gas Pressure Transmitter
15,000 - 45,000 Per Piece
1 Piece(s) (MOQ)
Application area : The VEGABAR 83 is a pressure transmitter for pressure measurement of gases, vapours and liquids in all industries. The VEGABAR 83 offers special advantages in applications with high pressures. The simple connection of VEGABAR series 80 sensors as electronic differential pressure opens new possibilities for the measurement of differential pressures.Your benefit Maximum dependability and safety through proven technology High reliability through vacuum resistant version Universal use due to welded measuring cell Function : The heart of the pressure transmitter is the completely welded, metallic measuring cell transforming the pressure via the integrated electronics into a standardized output signal. For measuring ranges up to 40 bar, a piezoresistive sensor element with internal transmission liquid is used. From 100 bar a strain gauge sensor element on the rear of the stainless steel diaphragm is used. This dry system operates without additional isolating liquid. The sensor element METEC® is used with temperature ranges up to 200 °C and larger process fittings,. This element consists of the ceramic-capacitive CERTEC® measuring cell and a special, temperature-compensated chemical seal system.Materials, wetted-parts 316L Alloy C22 (2.4602) 316Ti (1.4571) Alloy C4 (2.4610) Hygenic-fittings Clamp ≥ 1" - DIN32676, ISO2852 Slotted nut ≥ DN25 - DIN 11851 Varivent ≥ DN25 hygienic fitting with tension flange DN32 Hygienice flange connection ≥ DN50 DIN11864-2 SMS 1145 DN51 SMS DN38 Hygienic fittings ≥ DN33 - DIN11864-1-A Hyg. collar clamp adapter DN40PN40 DIN11864-3-A Hyg. clamp connection DIN11864-3-A; DN50 Rohr ø53 Swagelok VCR screwing Varivent G125 Seal-material EPDM FKM FFKM FEPM Housing-material Plastic Aluminium Stainless steel (precision casting) Stainless steel (electropolished) Protection-rating IP 66/IP 67 IP 66/IP 68 (1 bar) IP 68 (0.2 bar) IP 66/IP 68 (25 bar) IP 69 K Output Profibus PA Foundation Fieldbus 4 - 20 mA 4 - 20 mA/HART - two-wire Modbus Slave electronics for electronic differential pressure The pressure transmitter VEGABAR 83 is ideal for level and pressure measurement of liquids and viscous products with high process pressure. With its metallic measuring cell, the instrument delivers excellent measurement accuracy, even under a vacuum. This pressure transmitter is the first choice for process pressure or level measurement in processes with high pressure, e.g. for Circuit pressure measurement in hydraulic pumps Pipeline pressure measurement Bitumen level measurerment in asphalt mixing plants Storage tank level measurement, e.g. for milk in dairies Materials : The process fitting of the instrument is made of 316L or Alloy C276 (2.4819), the process diaphragm of Alloy C276 (2.4819). FKM, FFKM and EPDM.Housing versions : The housings are available as single chamber version in plastic, aluminium or stainless steel. They are available in protection ratings up to IP 68 (25 bar) with external electronics as well as in IP 69K.Electronics versions : Apart from the two-wire electronics with 4 - 20 mA or 4 - 20 mA/ HART, also purely digital versions with Profibus PA, Foundation Fieldbus and are available. In addition a version as Slave sensor is available for the electronic differential pressure measurement.Adjustment Adjustment on the measurement loop : The adjustment of the instrument is carried out via the optional display and adjustment module PLICSCOM or via a PC with the adjustment software PACTware and corresponding DTM. Wireless adjustment via Bluetooth : The Bluetooth version of display and adjustment module enables a wireless connection to standard adjustment units. This can be smartphones/tablets with iOS or Android operating system or PCs with PACTware and Bluetooth USB adapter.
...moreIndustrial Pressure Transmitter
12,000 - 45,000 Per Piece
1 Piece(s) (MOQ)
Application Area : The VEGABAR 14 pressure transmitter can be used universally for measurement of gases, vapours and liquids. The small pressure transmitter offers maximum reliability and operational safety. The VEGABAR 14 is an economical solution for a number of applications in all industries.Your benefit Low maintenance costs thanks to wear-free ceramic measuring cell High plant availability through maximum overload and vacuum resistance of the ceramic measuring cell Price-favourable version with small mounting dimensions Function : The heart of the pressure transmitter is the pressure measuring cell transforming the pressure into an electrical signal. This pressuredependent signal is convereted by the integrated electronics into a standardized output signal. Sensor element is the ceramic CERTEC® measuring cell with excellent long-term stability and high overload resistance.Materials : The wetted parts of the instrument are made of 316L, Duplex, PVDF or sapphire-ceramic®. The process seal is available in FKM, EPDM and FFKMHousing versions : The housing is equipped with plug connector according to ISO 4400, M12 x 1 or with direct cable outlet. It is available with protection ratings up to IP 67.Electronics versions : The instrument has a 4 - 20 mA signal output.Materials,-wetted-parts PVDF 316L Duplex (1.4462) Seal-material EPDM FKM FFKM Protection-rating IP 67 IP 65 IP 68 (0.2 bar) IP 68 (0.5 bar)
...moreLehry Pressure Reducing Control Valve
101,000 Per Piece
1 Piece (MOQ)
Country of Origin : India
Material : Stainless Steel, Brass
Application : Water Fitting
Color : Blue
Brand Name : Lehry
Media : Water
Valve Size : DN40 - DN300
Pressure : PN16-PN25
...morePressure Calibrator
68,000 Per Piece
1 Piece (MOQ)
Country of Origin : India
Corrosion Resistance : Yes
Brand Name : Keller
Display Type : Digital
Usage : Laboratory, Industrial
Specialities : High Performance, Easy To Operate
...moreRLT Portable Ultrasonic Flow Meter
75,000 Per Piece
1 Piece (MOQ)
Country of Origin : India
Material : Stainless Steel
Display : Digital
Size : 50mm to 3000mm
...moreOnline Turbidity Sensor
125,000 Per Piece
1 Piece (MOQ)
Country of Origin : India
Accuracy : 2 % of Reading
Material : Metal
...moreOnline Chlorine Analyzer
102,000 Per Piece
1 Piece (MOQ)
Country of Origin : India
Range : 0 to 20 mg/L
Accuracy : 2 %
Display Type : Digital
...moreOil Flow Meter
25,000 Per Piece
1 Piece (MOQ)
Country of Origin : India
Material : Cast Iron
Display : Analog
Operating Temperature : 0 to 60 Degree C
...moreRLT Mechanical Flow Meter
10,000 Per Piece
1 Piece (MOQ)
Country of Origin : India
Brand Name : RLT
Line Size : 25 Mm to 150 Mm
Accuracy : +/- 5 %
...moreLevel Switches
18,000 Per Piece
1 Piece (MOQ)
Country of Origin : India
Mounting Options : Side, Top, Bottom
Switch Type : Vibrating Fork
Media Type : Liquid, Solid, Sludge
Working Pressure : 0.5-50 Bar
Pole And Throw Specification : DPDT
Meter Technology : Vibrating Fork
Packaging Type : Box
...moreKeller Ultra--Fast Miniature Pressure Transducer
25,000 Per piece
10 Piece (MOQ)
Series M5 Capable of exposure to 200 °C Broad compensated temperature range, from -20...125 °C or -40...180 °C Excellent dynamic response, up to 50 kHz (pulsation measurements) Extremely compact design, pressure connection: M5 x 0,5 fine thread Insensitive to structure-borne vibration Teflon FEP cable with IP67 ferrule, suitable for use on test benches Pressure ranges of 3 bar, 10 bar and 30 bar (absolute) Temperature compensated 0...10 V output (Series M5 HB)
Country of Origin : India
Type : Pressure Transducers
Feature : Accurate Results
Frequency : 50hz
Brand Name : Keller
...moreKeller RFID Data Logger
5 Piece (MOQ)
Data Logger RFID (Series 21 DC RFID) Saves up to 8000 pressure-and temperature values. Integrated long-life battery for autonomous data logging. Total Error Band ± 0,5 %FS @ 0...50 °C. Passive RFID interface 13,56 MHz / ISO 14443. Integrated low-power I2C pressure transmitter also available as OEM
Country of Origin : India
Type : Data Loggers
Application : Logging, Monitoring
Feature : Accuracy
Automation Grade : Automatic
Brand Name : Keller
...moreKeller Passive RFID Pressure Transponder
5 Piece (MOQ)
Passive RFID Pressure Transponder (Series 21 D RFID) Provides pressure, test point numbers, temperature and device information. Energy supply via RFID interface, usable for an unlimited period without maintenance. Comfortable read out and forwarding of measurement data. Extremely resistant to environmental influences and vandalism. Pressure Ranges from 3 to 1000 bar.
Country of Origin : India
Type : Rfid Transponder
Application : Industrial
Packaging Type : Box
Color : Grey
...moreKeller Isolated Pressure Transducer
10 Piece (MOQ)
Country of Origin : India
Type : Pressure Transducers
Application : Static Application Use
Feature : Accurate Results
Brand Name : Keller
...moreGuided Wave Radar Level Transmitter
80,000 - 180,000 Per Piece
1 Piece(s) (MOQ)
The VEGAFLEX 81 level sensor measures maintenance-free all kind of liquids. Even in applications with vapour, buildup, foam generation and condensation, the sensor delivers precise and reliable measured values. The VEGAFLEX 81 is the economical solution for various level and interface measurements.Application area : With VEGAFLEX 81 you can measure all kinds of liquids essentially maintenance free. The sensor delivers precise and reliable measured values even in applications with steam, buildup, foam generation or condensation. VEGAFLEX 81 is a truly cost-effective level and interface sensor for your measuring task.Your benefit The guided adjustment enables a simple, time-saving and reliable setup Shortenable probes offer a simple standardisation and highest flexibility in the planning Comprehensive diagnostic possibilities ensure a maintenance-free operation and hence a high plant availability Function : High frequency microwave pulses are coupled onto a cable or rod and guided along the probe. The pulse is reflected by the product surface. The time from emission to reception of the signals is proportional to the level in the vessel.Measuring range Cable probe up to 75 m (246.1 ft) Rod probe up to 6 m (19.69 ft) Operating voltage Version for low voltage 9.6 - 48 V DC, 20 - 42 V AC, 50/60 Hz Version for mains voltage 90 - 253 V AC, 50/60 Hz Materials : The wetted parts of the instrument are made of stainless steel. The instrument seal is made either of FKM, FFKM or EPDM.Housing versions : The housings are available as double chamber version in plastic, stainless steel or Aluminium. They are available in protection class IP 66/ IP 67.Electronics versions : The instruments are available in different electronics versions. Apart from the two-wire electronics with 4 - 20 mA/HART, a four-wire version and two purely digital versions with Profibus PA and Foundation Fieldbus are available.Operation : The adjustment of the instrument is carried out via the optional display and adjustment module PLICSCOM or via a PC with the adjustment software PACTware and corresponding DTM. Further adjustment options are available via HART communicator as well as manufacturerspecific programs such as AMS™ or PDM.Version Basic version for exchangeable cable ø 2; ø 4 mm Basic version for exchangeable rod ø 8 mm Basic version for exchangeable rod ø 12 mm Coax version ø 21.3 mm for ammonia application Coax version ø 21.3 mm with single hole Coax version ø 21.3 mm with multiple hole Coax version ø 42.2 mm with multiple hole Exchangeable rod ø 8 mm Exchangeable rod ø 12 mm Exchangeable cable ø 2 mm with gravity weight Exchangeable cable ø 4 mm with gravity weight Exchangeable cable ø 2 mm with centering weight Exchangeable cable ø 4 mm with centering weight Exchangeable cable ø 4 mm without weight exchangeable, PFA-coated cable ø4 mm with non-coated centering weight Materials, wetted-parts PFA 316L Alloy C22 (2.4602) Alloy 400 (2.4360) Alloy C276 (2.4819) Duplex (1.4462) 304L Seal-material EPDM FKM FFKM Silicone FEP coated Borosilicate glass Housing-material Plastic Aluminium Stainless steel (precision casting) Stainless steel (electropolished) Protection-rating IP 66/IP 68 (0.2 bar) IP 66/IP 67 IP 66/IP 68 (1 bar) Output Profibus PA Foundation Fieldbus 4- 20 mA/HART - two-wire Modbus 4 - 20 mA/HART - four-wire The ace for level measurement and interface measurement in all liquids : The VEGAFLEX 81 guided radar sensor is exceptional when it comes to measuring the level or interface of liquids. Guided radar is extremely versatile and can be found in almost every industrial sector. Whether bitumen or liquefied gas, in storage containers or standpipes, in a metering tank or in tank farms – VEGAFLEX 81 measures the level or interface (separation layers) of liquids with great reliability and accuracy. Guided radar delivers reliable measurements data for control or safety systems for Level measurement in ammonia storage tanks Level measurement in standpipes Interface measurement in storage tanks, bypass tubes, standpipes
...moreABB Gauge Pressure Transmitter
38,000 Per Piece
1 Piece (MOQ)
Country of Origin : India
Application : IEC 61508 Certifications Versions For SIL2 / SIL3 Applications
Color : Silver
Brand Name : ABB
...moreLehry Forged Brass Mini Pressure Reducing Valve
4,900 Per Piece
1 Piece (MOQ)
Application : - Pressure reducing valves of this type protect installations against excessive pressure from the supply. They can be used for household, industrial or commercial applications within the range of their specification. By installing a pressure reducing valve, pressurisation damage is avoided and water consumption is reduced. The set pressure is also maintained constant, even when there is wide inlet pressure fluctuation. Reduction of the operating pressure and maintaining it at a constant level minimizes flow noise in the installation. Advantages : - Takes Less Space, easier to fit, less obtrusive underneath hot water storage heaters. Factory preset at 3 bar ±0.5, you can change the setting from 1 to 4 bar. The Redubar does not require any special maintenance The valve system design and types of seals used ensure operation with minimal noise. Silent Features:- Pressure Adjusting Range : 1.5 ~ 6 Kg/Cmsq Maximum Pressure : 16 Kg/Cmsq Maximum Temperature : 70°C Connection : Screwed End (BSP) Media : Water
Country of Origin : India
Material : Brass/Bronze
Brand Name : Lehry
Media : Water
Valve Size : 1/2 Inch, 3/4 Inch
Pressure : 1.5 - 6 Kg/cm2
...moreElectromagnetic Flow Meter
22,500 Per Piece
1 Piece (MOQ)
Country of Origin : India
Material : Stainless Steel
Brand Name : RLT , OWN
Type : Magnetic
Display : Digital
Accuracy : +/- 0.5 %
...moreDigital Online PH Meter
35,000 Per Piece
1 Piece (MOQ)
Country of Origin : India
Brand Name : RLT
Display Type : Digital
Accuracy : +/- 0.5 %
...moreDigital Manometer
25,500 Per Piece
1 Piece (MOQ)
Country of Origin : India
Application : Industrial Use
Color : Available in Different Colors
Feature : Accuracy
Condition : New
Display Type : Digital
Automatic Grade : Automatic
Brand Name : Keller
...moreDifferential Pressure Transmitter
58,000 Per Piece
1 Piece (MOQ)
Application area : The differential pressure transmitter VEGADIF 65 can be used universally for the measurement of liquids, gases and vapours. Typical applications are level measurements in pressurized vessels as well as flow measurements in combination with DP flow elements. Further applications are pressure monitorings on filters as well as density and interface measurements.Materials, wetted-parts 316L Alloy C22 (2.4602) Alloy 400 (2.4360) Tantalum Alloy C276 (2.4819) Rhodium>Gold>Alloy Seal-material EPDM FKM FFKM Copper Housing-material Plastic Aluminium Stainless steel (precision casting) Stainless steel (electropolished) Protection-rating IP 66/IP 68 (0.2 bar) IP 66/IP 67 IP 66/IP 68 (1 bar) Output 4 - 20 mA/HART Profibus PA Foundation Fieldbus 4 - 20 mA Your benefit Measurement of extremely small differential pressures through high precision measured value detection High reliability through integrated overload diaphragm Versatile use through a variety of measuring ranges and process fittings Function : The sensor diaphragms are deflected by the acting pressures. The filling oil transmits the pressure to a semiconductor measuring bridge. The output signal, which is dependent on the differential pressure, is measured and further processed.Materials : The process fitting is made of steel C22.8 (1.0460), Alloy or stainless steel 316L. The process diaphragm is available in 316L and high resistance materials Alloy C276 (2.4819), Alloy 400 (2.4360), Tantalum as well as Rhodium/Gold on 316L.Housing versions : The housings are available as single chamber or double chamber version in plastic, stainless steel or aluminium. They are available in protection ratings up to IP 68 (25 bar) with external electronics.Electronics versions : The instruments are available in different electronics versions. Apart from the two-wire electronics with 4 - 20 mA or 4 - 20 mA/HART, two purely digital versions with Profibus PA and Foundation Fieldbus are available.
...moreflow meter calibration services
15,000 Per Piece
1 Unit (MOQ)
Opening Hours