Inside Micrometers Dealers in Pune

Effective Diameter Measuring Micrometer is also commonly known as FCM or Floating Carriage Micrometer. This instrument is used for accurate measurement of 'Thread Plug Gauges'. Gauge dimensions such as Outside diameter, Pitch diameter, and Root diameter are measured with the help of this instrument. All these dimensions have a vital role in the thread plug gauges, since the accuracy and interchangeability of the component depends on the gauges used. To reduce the effect of slight errors in the micrometer screws and measuring faces, this micrometer is basically used as comparator.

• Features: Reliable performance, Compact design, Accurate reading, Easy to handle
• Applications: Scientific Laboratory, Mechanical engineering, Machining
• Used for: Measure distances between two points

Digital Internal Micrometer Features : Measuring range: 300-500 mm, New constant force digital readout, Single 300 mm setting ring covers full range And Radius anvils of tool steel for optimum centering. To know more about the product visit

• Range: 400-1150mm
• Categories: Mechanical Internal Micrometer, MICROMETERS

Microtest AG is for more than 50 years specializing in measurement of internal diameters. Microtest products are in use all over the world and guarantee the highest precision over long periods of time. The MICROTEST system is the only one that can measure internal diameters from 400 mm to 1150 mm, precisely and accurately. Based on its unique, robust design, Microtest are able to produce an instrument with unrivalled accuracy. These instruments are built very light and come with extra hard ratchets to achieve perfect self centering in a big bore. The instruments are suitable for both vertical and horizontal applications. Available measuring ranges are: Ø400-650, Ø650-900, Ø900-1150 mm Why use the Microtest System? The Microtest Measuring System reaches the high accuracy through simultaneous operation of three measuring spindles to obtain the stop point at which the measurement is taken A good vibration generated by the ratchet gives repeatable measurements, independent of the user‘s sense of touch The plastic coating protects against spray water, dirt and thermal expansion The temperature-compensated design enables precise & accurate measurements even if the standard ambient temperature of 20 °C is not maintained, since the material expansions of the work piece and the measuring instrument are almost completely balanced out Over and above this, the Microtest System is maintenance free FEATURES: Measuring Range: Ø400 – Ø1150 mm 1 µm reading with parallax-free readout Automatic self centering for easy & safe handling Deep blind hole measurement Extensions available on demand Insulated construction for thermal protection Automatic linear wear correction through easy adjustment Performance of higher accuracy at low cost High-strength aluminium housing Titanium-coated star housing Hardened chrome-steel measuring probes Tungsten carbide measuring anvils Torque-stable ratchet Made in Switzerland After sales service

• Brand Name: Micro Epsilon
• Features: High-resolution micrometer (LED)
• Measuring Range: 40 (mm)
• Linearity: +- 3 micro m
• Resolution: 0.1 micro m
• Measuring rate: 2.3 kHz

DESCRIPTION/ SPECIFICATIONS * Wide measuring range with interchangeable anvils. * With Ratchet Stop for constant force.

We are offering Floating Carriage Micrometer. Offers effective calibration of Thread Plug Gauges and Taps. Provides Major, Minor Diameters calibration of threads. Mechanical Electronic Model Range: 0-100mm0-4” & 0-175mm0-7”. Resolution: 0.0002mm 0.0001 mm Repeatability: 0.002 mm0.0002 mm Accuracy: 0.004mm 0.002mm with P10 probe Accessories: Thread Measuring wires, Prisms, Cylindrical masters & Taper thread plug attachment.

ypes - Digital, Analog Micrometers are used in telescopes or microscopes to measure the apparent diameter of celestial bodies or microscopic objects. Brands - Mitutoyo, Baker, Yamayo, Insize, Fork, Mahr

• Color: Grey
• Brand: Mitutoyo
• Range: 0.025 mm
• Accuracy: 0.001 mm
• Size: 25 mm
• Usage/Application: measuring various type of product

• Brand Name: Mitutoyo
• Model Name/Number: 123-101
• Molding Type: Disc Micrometer
• Range: 0-25 mm
• Accuracy: 0.01 mm
• Size: 0-25 mm

Capitalizing upon our well-developed resources, we are engaged in the production and distribution of Height Micrometer. These Height Micrometers, provided by us, are extensively demanded by the clients for the reliable make and dependable results. We offer the Height Micrometer to the clients in varied technical specifications as per the requirement. We offer the Height Micrometer to the clients at reasonable price. Specifications Manufacturing range for master cylinder: 75-600 mm lengthDesign and accuracy as per IS 6952:1990 Applications Unity master cylinder is used for checking square of precision machine tools.It is also used as reference tool for setting square of checking instrument Demanded By Automobile industryProduction industryMechanical industryEngineering industryGear manufactures Features Unity Digital Height Master incorporates all good features of its mechanical height master and offer digital display of 0.0005 mmDigital readout is housed in a large enclosure thus environmental changes do not affect accuracy of measurementAll readings can be recorded through computer-Printer with the help of special software (Optional)It has many additional features like ABS – Zero, Presetm Reset, INCH/Mm, Datahold, INC function, etc.Special features like adding, checking centred distance, difference between two points thus avoiding calculations are incorporatedThe height Master can be used fully even if electronic unit failsFeatures of mechanical unit are not disturbed Mechanical Features Manufactured in Technical Co-operation with Trimos S.A. SwitzerlandExceptional accuracy : this is better than specifications of Indian standard IS : 13907 : 1994 (ISO 7863 : 1984) Height setting Micrometer and Rising Block specificationsIn one column 3 sets of measuring faces are united hence if at all any one or more measuring faces are accidently damaged two other sets are available. Thus this unit is equicalent to 3 Height MastersThe measuring faces protrude 12 mm & the area of measuring faces is approx. 1Sq. Cm. (100 Sq. mm) making it possible to approach from all directionsBody with Hammertone finish

• Resolution: 0.0002mm/ Tumor & 0.0001mm For Electronic Model
• Accuracy: 0.004mm & 0.002 Mm With P10 Probe
• Range: 0-100mm/0-4
• Feature: Immaculate finish, Sturdiness, Reliable and accurate
• Repeatability: 0.002 mm / 0.000r & 0.0005 mm for electronic model

• L x W x H ( cm ): 35 x 19 x 12.5,5 x 29 x 28
• Approximate weight: 25 kg.,40 kg.

effective diameter measuring micrometer (edmm) is also commonly known as fcm or floating carriage micrometer. This instrument is used for accurate measurement of 'thread plug gauges'. Gauge dimensions such as outside diameter, pitch diameter, and root diameter are measured with the help of this instrument. All these dimensions have a vital role in the thread plug gauges, since the accuracy and interchangeability of the component depends on the gauges used. To reduce the effect of slight errors in the micrometer screws and measuring faces, this micrometer is basically used as comparator.robust graded cast iron body. Seasoned for dimensional stability. Integrated “v” guide ways ground to finest accuracy. Micrometer least count - 0.0002 mm or 0.001 / 0.002 / 0.005 with non rotary spindle. Micrometer & fiducial have 8 mm dia spindle. Instrument accuracy maintained in accordance with npl uk specifications the instrument is very useful for thread plug gauge manufacturers, gauge calibration laboratories, established under nabl accreditation and in standard room where inhouse gauge calibration is carried out standard accessories male and female centers, micrometer 0 - 25 mm (non rotary spindle), least count 0.0002 or 0.001 sensitive fiducial indicator ( 375x ) npl uk design patent no. 541308 or dial type indicator (optional) set of required allen - keys / other tools. odd flute attachment hook and pillars for holding measuring wires packed in wooden box.

Floating carriage micrometer It provides calibration of major, minor, & effective pitch diameters for external threads plug gauge. Can be used to check effective diameter of tapes. All its guides ways, wear parts are hardened to prevent wear during prolonged use. Vee guides & centers are made from high carbon high chromium steel for longer life.

• Brand: Insize
• Range: 0-25mm
• Accuracy: 4um
• Product Code: 3232 / 3532
• Graduation: 0.01mm
• Length: 57mm

Traceable to NPL vide their certificate no : 739022162001, Used for Pitch diameter measurement of Thread Plug Gauges.Used for measurement of Thread Angle and form of Thread Plug Gauges & Thread Ring Gauges.

• Brand Name: Yuzuki
• Type: Outside
• Material: Stainless Steel
• Model Name/Number: Mic025w
• Range: 0-25,25-50,50-75,75-100
• Accuracy: 0.01 Mm
• Features: Carbide Measuring Faces, Painted Frame, Setting Rod Provided, Two Qualities provided, Resolution 0.01mm ( Metric)
• Usage/Application: Used For Measurement Of Od

• Material: Stainless Steel
• Type: Digital
• Range: 0-100 mm
• Features: Easy operation with 2 buttons, Each Micrometer Supplied with calibration certificate with actual values.
• Brand: Baker
• Protection: IP65
• Model Name/Number: DMM25

• Type: Digital
• Range: 0-25 mm
• Material: Stainless Steel
• Brand: Baker
• Accuracy: 100%
• Measuring Force: 7 to 9 N

The Floating Carriage Micrometer is used for accurately measuring the 'Thread Plug Gauges'. The Floating Carriage Diameter Micrometer effectively measures the various dimensions of the gauge like outside diameter, Pitch diameter, Root diameter etc. The instrument is manufactured from the quality material which makes it durable to the highest extent. The manufacturing mechanism involves the latest technology which increases the efficiency level by multiples. The accuracy factor is given the utmost importance so that all kinds of experimental error can be avoided. By strictly maintaining the world standards, we have enlisted ourselves among the reputed Floating Micrometer Manufacturers based in India.

We are offering floating carriage micrometer. Offers effective calibration of thread plug gauges and taps. provides major, minor diameters calibration of threads. mechanical electronic model range: 0-100mm0-4” & 0-175mm0-7”. resolution: 0.0002mm 0.0001 mm repeatability: 0.002 mm0.0002 mm accuracy: 0.004mm 0.002mm with p10 probe accessories: thread measuring wires, prisms, cylindrical masters & taper thread plug attachment.

• Brand Name: Mitutoyo
• Range: 0-25 mm
• Material: Mild Steel
• Accuracy: +-2 mm
• Pack Type: Box

Floating Carriage Micrometer, measuring machines, Gauge Block Comparator

Mitutoyo Inside Micrometer, propeller blades, Makita Power Tools

Micrometer Outside micrometer, glass edge polishing machine

plunger dial gauge, Testing Equipments

Scanning unit Specifications For measuring large diameter work pieces more than 300 mm, it can be measure by combination of units of single axis scanning unit No influence to the measure value by ambient light such as the sunlight, etc Measurement of high temperture object with upto 2000 degrees centigrade is avilable by minor modification of scanning unit

MITUTOYO MICROMETER, Crystal Flexible Magnetic stand, Lutron Lux Meter

Micrometers, air gauges, electronic gauges, Air Electronic Gauging System