Intech Automation Systems Chinchwad, Pune, Maharashtra

 Sizes : Cylindrical Dia. M18 to M30 & Square  Sensing Distance : 300mm to 10mtr   No other measuring method can be successfully put to use on such a wide scale and in so many different applications. The devices are extremely robust, making them suitable for even the toughest conditions. The sensor surface cleans itself through vibration, and that is not the only reason why the sensor is insensitive to dirt. The physical principle—the propagation of sound—works, with a few exceptions, in practically any environment.   The measuring method employed by ultrasonic sensors has been viewed as an excessively complex technology, and only used as a “last resort” ... as a solution for particularly difficult applications. Those times have long since passed! Ultrasonic sensors have proven their reliability and endurance in virtually all industrial sectors.   These sectors include  Mechanical engineering/machine tool  Food and beverage  Woodworking and furniture  Building materials  Agriculture  Construction  Pulp and paper  Material handling  Level measurement

Counter/Timer/Tachometer  Adding/subtracting via 2 separate inputs  Batch controller with 2 pre-selections  2 potential-free optocoupler outputs  Easy-to-read 2-line LCD display, color, with icons for the displayed preselection and the status of both outputs  Multicolor display  Display range and preselection range from -999999 up to 999999 Overflow will be evaluated correctly up to 1 decade  PNP and NPN sensors can be connected  Degree of protection IP65 (front only)

Zero-voltage switching. Current range:15A to 90A  Alternating current solid state relay  Zero crossing switching  Copper/semiconductor coupling technology  10, 25, 50, and 90 Arms nominal current  Non-repetitive voltage: up to 1600Vp  Nominal Voltage: up to 600VCAms   Zero-voltage switching, optimised fast cycle time. Current range: 25A to 120A, diagnostics and load interrupt alarm Command input from analogue voltage or current signal or potentiometer. Switching at voltage zero crossing. Partialization of wave train power with dynamically optimized time cycle. Antiparallel double SCR

Automation light grids  Optical resolution 25 mm  Super-fast object detection, even with 3-way beam crossover  Software-free adjustment of height monitoring  Object identification using integrated object recognition  IO-link interface for service and process data  Optional temperature range too  Output : PNP/NPN NO& NC  Fully programmable  Hight : 100mm to 2000mm  Sensing Distance : 5mtr   Light grids consist of a transmitter and a receiver unit with a parallel array of a large number of infrared through beams. They have a two-dimensional detection field and are used for monitoring large areas. In spite of the simple operating principle, you’ll find an array of specialized light grids in our portfolio: large light beam angles ensure easy alignment, “Teach-in” functions permit fast adjustment, crossed light beams increase the resolution of the light grids, and automatic calibration of the signal strength ensures safe operation even in dirty or dusty areas.   Most important applications are  Door control in elevators  Small parts detection  Monitoring transparent foils in packaging machines  Web break detection  Profile and height control of pallets in material handling and conveying applications

  Pepperl+Fuchs-GmbH Rotary Encoders Incremental rotary encoders supply a certain number of pulses for each shaft revolution. Speed is measured by counting the pulses for a period of time. To calculate angle or the distance covered, pulses are counted starting from a reference point. Dual channel quadrature output encoders feature two signal outputs that are 900 out of phase with each other. This permits the controller to determine direction of rotation and perform bi-directional positioning tasks. In addition, three-channel incremental encoders have a third signal channel (known as “zero”, or reference, signal) that provides a single pulse for each revolution.  Incremental and absolute  Solid shaft and hollow shaft versions  Used for rotary position feedback and many other applications  Standard pulses :50to 5000 PPR  Diameter : 40mm ,50mm, 58mm

Inductive proximity sensors are the preferred choice for the majority of applications requiring accurate, non-contact detection of metallic objects in machinery or automation equipment. As a pioneer and market leader, Pepperl+Fuchs-GmbH offers innovative, high quality inductive sensors to meet the needs of the worldwide automation and process control markets. Our experience, flexibility and customer focus continues to allow us to offer custom designed solutions for the most unique and demanding applications.   Standard Inductive Sensor Product features Smooth or threaded stainless housings Sensing Distance from 0.8mm to 100mm Polarity reversal and short-circuit protected LED status indication Power on and signal Connection styles include M8, M12, M30 or terminal connection models Models with PVC, PUR or silicon cable Outputs in 2-, 3-, 4-wire DC, AC, NAMUR, and AS-Interface versions Standard Inductive Sensor Product features  Analog output models with 4-20 mA output signal  Integrated speed monitor with up to 100 Hz operation  Pressure resistant cylinder sensors for up to 500 bar  Sensors approved for gas and dust Ex zones  Models with stainless steel sensing face  Protective class of up to IP68/ IP69k (submersible/ high pressure water jet resistant)  Weld resistant designs with PTFE-coated surface  Reduction factor of 1, all metals sensed at same distance  Output : PNP,NPN NO/NC  Exclusive ferrous and non-ferrous detection models  Safety function sensors  Extended temperature range: -40 °C up to +250 °C

Transmitters are based on film sensing element deposited on stainless steel diaphragm. Thanks to the latest state of the art SMD electronics and compact all stainless steel construction, these products are extremely robust and reliable, with SIL2 certification supplied as standard. KS transmitters are suitable for all industrial applications, specially on hydraulics (presses, pumps, power pack, fluid power, etc.) with severe conditions usually with high level of shock, vibration, and pressure and temperature peaks.    Ranges: from -1 to 1000 bar  Nominal Output Bracket: 0-10  Nominal Output Signal: 0...10Vdc (3 wires) / 4...20mA (2 wires)  Compact size  Wetted parts: Stainless steel  SIL 2 certified according to IEC/EN 62061:2005   Transmitters are based on the extensimetric thick film measuring principle. Thanks to highly stable electronic components, these transmitters can be used in applications requiring longdistance signal transmission or in smart control systems. TK pressure transmitters are designed mainly to measure pressure in oil, air, and hydraulic circuits.   They can also be used in the technical and process measurement application as well as for compressors, presses and mobile hydraulic.

Our broad range of photoelectric sensors is aimed at all automation solutions where noncontact object detection can be utilized. The wide variety of different operating principles, models, sizes and specifications means that the best possible sensor can always be found for the relevant application and all conditions that occur in practice can be met. Take a look at our impressive selection of noncontact photoelectric sensors. You are sure to find the right one for you. Perfectly adapted customer-specific optical solutions are also available. Talk to us!    Diffuse  Background Suppression  Convergent  Sensing Distance from 50mm to 1mtr  Output : PNP/NPN NO/NC,Relay,Push Pull  Retroreflective  Polarized and standard  Clear object detectionForeground suppression  Thru-beam  Fiber optic Glass or plastic fiber cable Color , Contrast  Liminescence , Optical data couplers  Light grids  Retroreflective area sensors  Laser distance measurement

In the field of sensor/actuator connectivity, Murr Elektronik-GmbH offers you an extremely wide range of cable types and colors. M8/M12 round plugs are quick and easy to install to fit with a torque wrench. Valve connectors from Murr Elektronik-GmbH are designed for all types of valves. They are fitted with captive seals and have an integrated LED and protection circuit.   In the field of M12 connections, Murr Elektronik-GmbH offers the MQ12 - a unique quick-lock system that fits any sensor. The M12 Steel is a plug connector that meets the extremely high demands of the food and beverage industry. Connector Size M8 Male/Female M12 Male/Female T-Coupler Solenoid Valve Connectors 24 VAC/DC 110 VAC/DC 230 VAC/DC Fieldbus Connectors Food Grade Connectors

Gefran-SpA-Italy Melt pressure sensors are designed to satisfy every need in plastics processing. Gefran is able to provide to its customers different Melt pressure transducers for different applications at high process temperatures, up to 540°C.    Pressure ranges from: 0-35 to 0-2000 bar / 0-500 to 0-30000 psi  Strain gage Wheatstone bridge  Accuracy :

    Gefran-SpA-Italy Megnetostrictive Linear Position Transducer Contactless Absolute Linear Transducers represent an advance over linear displacement transmitters based on potentiometric technology, and offer higher performance for increasingly complex. ONDA technology Optimised mechanical structure Strokes from 50 to 4000mm Sliding or floating magnetic cursor Availability of several analogue outputs (voltage or current) for direct position and speed measurement or reverse measurement (only position) Single or double cursors models availability Power supply 24Vdc ±20% Resistance to vibration (DINIEC68T2/612g) IP67 protection Work temperature: -30...+75° Rod Style IK4A (with ONDA technology) contactless magnetostrictive linear position transducer (Analog output) Stroke : 50 – 4000 mm  MK4A (with ONDA technology) Contactless magnetostrictive linear position transducer (ANALOG 

Force transducers are used to measure the tension that plastic films or tapes exert on the guide rollers of the machinery used to coil them. They are machined from a single block of metal, so the primary sensing element, the mountings and the case contain no welds allowing smaller dimensions and an enhanced grade of protection. The configuration of the point of measurement, with 8 strain gauges, reduces errors caused by imperfect applications of the load. Typical applications of load cells connected in parallel are: silos, hoppers, large weighing platforms. The stainless steel construction is suitable for use in aggressive environments in the chemical and petrochemical industries.    Range of measurement: from 50 to 50,000 Kg  Accuracy class: 0.2%  All stainless steel construction  Corrosion resistant  Grade of protection: IP67 (DIN 40050)  Compact size

A comprehensive range of models based on potentiometric technology for every kind of linear displacements measurement. Versions are available with shaft or cursos, with different mounting methods (brackets, flanges, or self-aligning ball joints) and different levels of protection   LTM-PKM-PY2 STROKE 10mm TO 2000 mm  The transducer has been improved in order to guarantee greater reliability under all conditions  A sturdier structure makes the LT series even stronger for applications with heavy vibration  Installation is made simpler by the absence of electrical signal variation in output, outside the Theoretical Electrical Stroke  The new grooves provide an excellent alternative to the usual system of fastening with brackets  Ideal for applications on plastic injection presses, vertical presses, and on many other processing machines

 Instrumentation Control Panel  Signal Isolator / Converter  Temp / Pressure / Follow Indicator / Controller  I/P Converter   Power Pack for Proximity Sensor  Length Counter

Universal input configurable from faceplate  Accuracy better than 0.2% f.s. under nominal conditions  Control output: relay, logic, Triac or continuous  Hot/cold function with selection of cooling fluid  3 alarms with completely configurable function  Isolated digital input with configurable function  Analog retransmission output   The model 556 is configurable for many different functions and is designed for reliability in industrial environments. The double display and minimum size make it the ideal choice for every requirement for a timer, counter or frequency meter. The display can be expressed in the engineering units of the count effected using one of the five prescaler ranges. As a timer, it has six scale ranges from hundredths of a second to hours and minutes.