IO Modules Dealers in Pune

• Brand Name: Span
• Channel: 8
• Operating Humidity: 20 to 95 % RH
• Model Name/Number: ADAM-6017
• Input Impedance: Greater than 10 M Ohm
• Accuracy: +/- 0.1%
• Resolution: 16-bit
• LAN: 10 / 100 Base
• Power Consumption: 2.5 at 24 V DC
• Watchdog: 1.6 sec
• Power Input: 10 to 30 V DC
• Operating Temperature: -10 to 70 deg C
• Storage Temperature: -20 to 80 deg C
• Storage Humidity: 0 to 95 % RH

• Power: + 24V DC ± 5%, 3.5W maximum
• Operating Temp.: 0º to 50º C
• Storage Temp.: -20º to 80º C
• Humidity: 10% to 90% (Non Condensing)
• Mounting: DIN rail or back panel mounting
• Dimensions Eagle-0404, Eagle-800 Eagle-0201-0302: 155 mm x 102 mm x 48 mm 94 mm x 42 mm x 47 mm
• Immunity to ESD: 8kV Air, 6kV contact as per IEC 61000-4-2
• Transient Immunity: 2kV as per IEC61000-4-4
• Radiated Immunity: 10V / meter as per IEC61000-4-3
• Emission: As per EN55011 CISPR A
• Isolation: Analog section isolated from digital. No isolation between channels.
• IBM Port: Connects to PC for application download or operator interface for Pass-through.
• PLC Port: Connects to PLC
• Response Time: Depends on driver (Typical 200 mSec / Channel)

analog io modules are devices that are Input Output to a SCADA. Inputs are Temperature, Pressure, Flow rate, Humidity, Level etc called as Analog Inputs. Inputs from Flow switches, level switches, Pressure switches, Proximity switches, Limit switches, auxiliary contact of contactor etc are called Digital Inputs.

IO Modules With the CANio 250500 and the ETCio 100, HMS offers three modules enabling quick and easy connection of analog and digital input and output signals to CAN, CANopen and EtherCAT systems – whether in experimental setups, test benches or vehicles. To adapt the IO modules to your requirements, HMS also offers a special Application Development Kit for the CANio 250500.

• Type: K2HNV-XS
• Safety Contacts: 3
• Safety Level: depending on main relay
• Power Supply Voltage: 24 V AC/DC

Analog IO Module, Metering Panels, sensor controller, servo control system

I / O-Module