Isolation Transformers Dealers in Akurdi, Pune

• Brand Name: Starlit Electricals
• Capacity: 40 KVA
• Construction: Indoor Varnish Impregnated Dry type with
• No of Phases: 3 / 3 enclosure
• Vector Group: Dyn11
• Tapping Arrangement: Offline tap changer with tap changing
• Insulation Class: B / F Links
• Ratio: 433 / 433

In order to fulfill the demands of our clients, Starlit Electricals has been engaged in manufacturing a quality range of Lighting Transformer. Its primary supply connected to higher voltage 3Ph source and secondary is to be connected to load.   Lighting Transformers are designed to supply power to lighting equipments in a commercial / industrial / domestic unit. Its primary supply connected to higher voltage 3Ph source and secondary is to be connected to load. Lighting transformers serves as isolation between primary and secondary, it also restricts any high voltage spikes and EMF coming with the raw mains incoming power. Lighting Transformers are very useful when system neutral is not available or faulty i.e. where incoming supply is 3 phase 3 wire and lighting load is 220 Volt single phase. It also restricts short circuit current in the load and saves major accidents. Power House lighting transformers are made with CRGO laminations and Electrolytic copper super enameled winding wires. They are available for wide ranges of inputs out are in the range and in capacity from 1K VA to 100   KVA. Construction Lighting Transformers are two winding transformers with both windings made of copper. Electrolytic grade super enameled wires with best insulations are used. Core materials are CRGO Strip cores. Experienced hands with best machines for winding ensures best results with minimum size. Appropriate classes of insulation materials are used. Transformers are impregnated in insulating varnish for long lasting performance. Input and out are terminated on Glass Epoxy board with proper size of terminals. For Lighting Transformers greater than 30 KVA, usually a separate M.S Enclosure with temperature indicator is provided as shown in the drawing.  

ADVANTAGES Isolate primary winding and secondary windings. Provides isolated neutral. It protects micro processor based equipment from dangerous noises and reduces drive failures. It can be useful where machine earth can’t be used. By Providing Delta star isolation transformer, where there is problem of earth or neutral in the input side is taken care for the safety operation of the load by this Isolation transformer. It arrest the noises of high frequency and noises generated by the usage of high current MCB,ACB, Induction furnace or other electromagnetic noises.

• Cooling Type: Dry type/Air cooled
• Phase: Three
• Usage/Application: Industrial
• Inter winding Capacitance: 0.01 pF Maximum
• Insulation Breakdown Strength: 2.5 KV
• Line Frequency: 45 to 65 Hertz
• Insulation Resistance: Greater than 100 M ohm
• Efficiency: Greater than 92 %
• Enclosure Standard: IP 11 to IP 23
• Brand: Trutech
•  :  

We are offering isolation transformer features input voltage (primary) : 230v (183v to 264v) or 115v (98v to 132v). output voltage (secondary) : 230v (183v to 264v) or 115v (98v to 132v). common mode noise rejection : more than 130db. dc galvanic isolation : more than 1000m ohm between any winding or winding to case. break down voltage : 2.5kv ac for 2 minutes between any winding or winding to case. acceptable line frequency : 46 to 56hz. input output termination : terminal strips. Optional facilities : (at extra cost) built-in transient suppressor limits surges & spike of 100v µs. built-in rfi emi suppressor. input cable with plug. output socket of required rating

Shortcut introducing:- 1)recommended for loads likes cnc machine ,medical,photo,lab equipments and compunters to have a completey isolated supply 2) total protection for your sensitve loads from spikes,line voltage transients and common mode noise 3)optimum transformer design to have better load regulation 4)available in both aircooled and oil cooled.

• Phase: Single/Three Phase
• Output Voltage: 220/415 Volts
• Input Voltage: 110V/220V
• Power: 1 - 600 KVA
• Frequency: 50/60 Hz

• Phase: Single Phase, Three Phase
• Cooling Type: Dry Type/Air Cooled
• Frequency: 50 Hz
• Output Voltage: As per Requirement
• Usage/Application: Industrial
• Power Source: Electric
• Brand: Darade
• Wire: F Class Copper
• Bobbins: FRP
• High Voltage Breakdown: 2.5 to 3.5 kV as per standard for 1 minute
• Insulation resistance: More than 100 M ohms
• Terminal Connection: Touch Proof
• Overload Capacity: Minimum 10%

Lamco Transformers Pvt. Ltd. is a prominent manufacturer and supplier of distribution transformers that are specifically used for converting and distributing electrical energy with high voltage to lower voltages. This distribution transformer is made at ultra-modern unit using the premium quality components and advanced technology in conformance with defined quality standards. We are consistently manufacturing high quality distribution transformer at affordable prices. Ranging From 25KVA, 63KVA, 100KVA, 200KVA, Upto 1MVA For Line Voltage 11kv, 22kv and 33kv.

lighting transformers, ht metering cubicle

Single Phase Isolation Transformer, Electrical Transformers

isolation charger transformers, Isolation Transformers, Auto Transformers

Servo Controlled Voltage Stabilizer, Automatic Power Factor Controller

ground leakage monitoring system, Transformers, Voltage Stabilizers