Isolation Transformers Dealers in Bhosari, Pune

With sincerity and hard work, we have carved a niche for ourselves by offering a wide gamut of Three Phase Isolation Transformer to our clients across the globe. The offered product range is widely used for decoupling two circuits. Further, the offered equipment allows AC signals to pass and blocks the DC signals. Moreover, our offered range can be availed in a wide range of specifications, as per the requirements of our esteemed clients. Features: Compact design Durable Dimensional accuracy

• Phase: Three
• Warranty: 1 Year
• Condition: New
• Application: Industrial
• Performance: Optimum
• Features: Long functional life

• Brand Name: NEHATECH
• Cooling Type: Air Cooled
• Speciality: Easy To Use
• Phase: THREE/SINGLE
• Usage/Application: Industrial
• Input Voltage: 415/230 V
• Output Voltage: 415/230/110 V

• Phase: Single Phase
• Packaging Type: Box
• Power Source: Electric
• Frequency: 50-60 Hz

Isolation Transformer generally means 1:1 ratio Transformers i.e. its purpose is to provide isolation between source and load usually with step up or step down requirements. These are used in industrial machines to meet their power  needs.       Power Range: 1 Ph or 3 Ph from 1 KVA up to 200 KVA Conductor: Electrolytic grade Copper Strips/Wires or Aluminum Core: CRGO or CRNGO type EI or strip Insulation Class: Class H or Class F Input and out are terminated using bus bars or connectors on board Transformers available with Cubicles upon request ​K-Rated Transformer can be designed as needed. Ultra-Isolation Transformer can be designed as needed. Features: Use of high insulating materials and special shielding techniques results in attenuating common mode and minimizing transverse mode noise The core and its magnetic properties are properly selected to provide sufficient leakage inductance. This will give the greatest attenuation of normal mode power line noise possible, consistent with the transfer of fundamental power frequency, while all higher frequencies are blocked Designed with split winding constructions and bifilar connections to reduce overall capacitance of the winding Due to better regulation, it does not generate common mode impedance coupling effect Protect against strong lightening, bus short-circuit, accidental discharge of capacitors etc Protect the Micro processor based machines and equipments from damage due to electrical noise, spikes etc.

• Input Voltage Range : 230 Vac / 415 Vac
• Output Voltage Range : 24 Vac / 48 Vac / 110 Vac / 220 Vac / 230 Vac / 380 Vac / 415 Vac
• Capacity : As required
• Frequency : 50 Hz / 60 Hz

Looking for control transformers? Trutech Products is the perfect stop for you, because from more than 18 years we are acknowledged as one of the top-notch Control Transformer manufacturers, suppliers and exporters. This type of transformer is specially designed for electric circuit which require a constant basis of voltage. These are highly demanded in the national and the international market because of its smooth performance, strong structure, high durability and long working life. This will help you to work without any voltage disturbance, which helps to increase your productivity and business as well. We also deliver your consignment safely in Mumbai, Pune, Thane, Nagpur, Delhi, Surat, and so on and in the international market as well. As leading 3 Phase control transformers manufacturer, supplier and exporter, we check the quality of our products on different parameters, before handing over to customers, so they never disappoint from our quality and after sale service as well. Clients who are interested to buy this transformer or our any other product can easily contact us by sending enquiries. These are generally used in an electronic circuit that requires constant voltage or constant current with a low power or volt-amp rating.Our wide range of control power transformers is designed to provide control power in medium voltage switchgear. Trutech Control Transformersare available in both single and three phase configurations & with further variations to provide more than one secondary output.   Features Of 3 Phase Control Transformers   Easy to install and operate and maintain as well Having a long working life Highly durable in nature Affordable price Superior quality   Specification of Singe Phase Control Transformer

The range is 100% quality checked and you can rest assured us for the same. We along with our quality auditors make certain that even the raw material used go through varied stages of checking. As a known name, we ensure safe and timely delivery of the orders at any desired Pune(India).

We are offering isolation transformer features input voltage (primary) : 230v (183v to 264v) or 115v (98v to 132v). output voltage (secondary) : 230v (183v to 264v) or 115v (98v to 132v). common mode noise rejection : more than 130db. dc galvanic isolation : more than 1000m ohm between any winding or winding to case. break down voltage : 2.5kv ac for 2 minutes between any winding or winding to case. acceptable line frequency : 46 to 56hz. input output termination : terminal strips. Optional facilities : (at extra cost) built-in transient suppressor limits surges & spike of 100v µs. built-in rfi emi suppressor. input cable with plug. output socket of required rating

Distribution Transformers usually use copper or aluminum conductors and are wound around a magnetic core to transform current from one voltage to another. Distribution transformers come in two types; dry-type and liquid. The Distribution Transformers are usually smaller and do not generate much heat and can be located in a confined space at a customer's location. The liquid type usually have oil which surrounds the transformer core and conductors to cool and electrically insulate the transformer (see also Oil Filled Transformers). The liquid distribution transformer types are usually the larger and need more than air to keep them from overheating thus the oil insulator. Distribution transformers can vary in size, with the most common ranging in size from 5 KVA single phase to 2500 KVA. They come in single phase and three phase and can be pad mounted or pole mounted. The three phase Distribution transformers are used with an underground primary circuit and three single-phase pole type transformers for overhead service. Where large concentrations of businesses or large cities they are usually installed in an underground vault. Power is then sent via underground cables to each customer. One of the main advantages of distribution transformers are that they can usually withstand overloads.

• Phase: Single/Three Phase
• Output Voltage: 220/415 Volts
• Input Voltage: 110V/220V
• Power: 1 - 600 KVA
• Frequency: 50/60 Hz

• Phase: Single Phase, Three Phase
• Cooling Type: Dry Type/Air Cooled
• Frequency: 50 Hz
• Output Voltage: As per Requirement
• Usage/Application: Industrial
• Power Source: Electric
• Brand: Darade
• Wire: F Class Copper
• Bobbins: FRP
• High Voltage Breakdown: 2.5 to 3.5 kV as per standard for 1 minute
• Insulation resistance: More than 100 M ohms
• Terminal Connection: Touch Proof
• Overload Capacity: Minimum 10%

portable isolation transformers, electric isolation transformers

Distribution Transformers, Furnace Transformers, High Voltage Transformers

dry type 3ph isolation transformer, 3 ph control transformer

Distribution Transformers, Power Transformers, oil filtration equipment

Isolation Transformers, Servo Controlled Voltage Stabilizer

Ultra Isolation Transformer, Servo Controlled Voltage Stabilizer

Isolation Transformer, ground leakage monitoring system, Transformers

Isolation Transformers, Auto Transformers, isolation charger transformers