Isolation Transformers Dealers in Chakan, Pune

Distribution Transformers It is the transformer which brings final voltage down and distributes the electrical power to the power lines through distribution poles. It helps the electricity to reach our home. This kind of power distribution requires various transformers with different sizes and proficiencies. So People select as per their budget and requirements.

SPECIFICATIONS Type Shielded Isolation Transformer Capacities From 5 KVA to 1000 KVA Voltage Class Up to 6.6 KV Phases Three Phase & Single Phase Frequency 50 Hz 60 Hz. Typical Voltage Configurations in Three Phase (Other Voltage configurations available as per customer requirements) 6.6 V 433 V; 6.6 V 415 V; 6.6 V 230 V; 433 V 6.6 V; 433 V 433 V; 433 V 415 V; 433 230 V; 415 V 6.6 V ; 415 V 415 V; 415 V 230 V. Insulation Class F Class H Winding Material Copper Magnetic Core Prime Grade Virgin C.R.G.O Shielding Material 0.2 mm Electrolytic copper foil Insulation Increased level of insulation using Vacuum Pressure Impregnation. SPECIAL FEATURES Service Designed for long life and trouble free performance Losses Designed for lower losses and greater efficiencies Test Standards Designed for IS 2026 11171 & I.E.C 60076. Value Designed for cost effectiveness and high reliability Installation Designed for installation closer to load Safety Designed for protection against harsh environmental conditions. Isolation Electrostatic Isolation between Primary & Secondary to suppress Electrical noises.

The range is 100% quality checked and you can rest assured us for the same. We along with our quality auditors make certain that even the raw material used go through varied stages of checking. As a known name, we ensure safe and timely delivery of the orders at any desired Pune(India).

ADVANTAGES Isolate primary winding and secondary windings. Provides isolated neutral. It protects micro processor based equipment from dangerous noises and reduces drive failures. It can be useful where machine earth can’t be used. By Providing Delta star isolation transformer, where there is problem of earth or neutral in the input side is taken care for the safety operation of the load by this Isolation transformer. It arrest the noises of high frequency and noises generated by the usage of high current MCB,ACB, Induction furnace or other electromagnetic noises.

With sincerity and hard work, we have carved a niche for ourselves by offering a wide gamut of Three Phase Isolation Transformer to our clients across the globe. The offered product range is widely used for decoupling two circuits. Further, the offered equipment allows AC signals to pass and blocks the DC signals. Moreover, our offered range can be availed in a wide range of specifications, as per the requirements of our esteemed clients. Features: Compact design Durable Dimensional accuracy

• Phase: Three
• Warranty: 1 Year
• Condition: New
• Application: Industrial
• Performance: Optimum
• Features: Long functional life

Distribution Transformers usually use copper or aluminum conductors and are wound around a magnetic core to transform current from one voltage to another. Distribution transformers come in two types; dry-type and liquid. The Distribution Transformers are usually smaller and do not generate much heat and can be located in a confined space at a customer's location. The liquid type usually have oil which surrounds the transformer core and conductors to cool and electrically insulate the transformer (see also Oil Filled Transformers). The liquid distribution transformer types are usually the larger and need more than air to keep them from overheating thus the oil insulator. Distribution transformers can vary in size, with the most common ranging in size from 5 KVA single phase to 2500 KVA. They come in single phase and three phase and can be pad mounted or pole mounted. The three phase Distribution transformers are used with an underground primary circuit and three single-phase pole type transformers for overhead service. Where large concentrations of businesses or large cities they are usually installed in an underground vault. Power is then sent via underground cables to each customer. One of the main advantages of distribution transformers are that they can usually withstand overloads.

• Brand Name: NEHATECH
• Cooling Type: Air Cooled
• Speciality: Easy To Use
• Phase: THREE/SINGLE
• Usage/Application: Industrial
• Input Voltage: 415/230 V
• Output Voltage: 415/230/110 V

Isolation Transformer generally means 1:1 ratio Transformers i.e. its purpose is to provide isolation between source and load usually with step up or step down requirements. These are used in industrial machines to meet their power  needs.       Power Range: 1 Ph or 3 Ph from 1 KVA up to 200 KVA Conductor: Electrolytic grade Copper Strips/Wires or Aluminum Core: CRGO or CRNGO type EI or strip Insulation Class: Class H or Class F Input and out are terminated using bus bars or connectors on board Transformers available with Cubicles upon request ​K-Rated Transformer can be designed as needed. Ultra-Isolation Transformer can be designed as needed. Features: Use of high insulating materials and special shielding techniques results in attenuating common mode and minimizing transverse mode noise The core and its magnetic properties are properly selected to provide sufficient leakage inductance. This will give the greatest attenuation of normal mode power line noise possible, consistent with the transfer of fundamental power frequency, while all higher frequencies are blocked Designed with split winding constructions and bifilar connections to reduce overall capacitance of the winding Due to better regulation, it does not generate common mode impedance coupling effect Protect against strong lightening, bus short-circuit, accidental discharge of capacitors etc Protect the Micro processor based machines and equipments from damage due to electrical noise, spikes etc.

• Phase: Single Phase
• Packaging Type: Box
• Power Source: Electric
• Frequency: 50-60 Hz

Our products have the largest satisfied customer base. Dedicated to providing environment friendly quality solutions and commitment to delight customers with unique value propositions.

Capacity range upto 200 KVA 3Ph   ParticularStandards System Connections Delta/Star Input Voltage 415V 3Phase Ratios 1:1 and 2:1 Regulation Better than 3.5% Output Voltage 415V or 200,220V 3Phase Di-Electric strength 3KV for 60 Sec Insulation Resistance Better than 1000 Mega Ohms Power Factor 0.75 Lead to 0.75 Lag Construction Standard as per IS 20126 Part I & II, IS 11171 Comman Mode Attenuation 100 db/120 db Coupling Capacitance 0.1 PF for 80db Leakage Current Less than 20 Micro Amps Type of Execution Closed Type Operating Temp. 0 degree celcius to 45 degree celcius Type of cooling Natural Air/ Forced Air Oil Cooled (Optional)   • Eliminates stresses that come from normal electrical transients.• Meet stringent clean power requirements of the sophisticated / sensitive equipments.• Reduces the effects of power line problems like Noise, Spikes, Surges, Transients and Neutral to minimum.

Single Phase Isolation Transformer, Electrical Transformers

booster transformers, Distribution Transformers, Power Transformers

Ultra Isolation Transformers, Battery Chargers, Servo Voltage Stabilizers

3 ph control transformer, dry type 3ph isolation transformer

power isolation transformers, electric isolation transformers

Distribution Transformers, Power Transformers, oil filtration equipment

Distribution Transformers, Furnace Transformers, High Voltage Transformers

buck boost transformers, Oil Immersed Power Transformers

Isolation Transformers, Servo Controlled Voltage Stabilizer