Isolation Transformers Dealers in Chinchwad, Pune

• Phase: Single/Three Phase
• Output Voltage: 220/415 Volts
• Input Voltage: 110V/220V
• Power: 1 - 600 KVA
• Frequency: 50/60 Hz

• Cooling Type: Dry type/Air cooled
• Phase: Three
• Usage/Application: Industrial
• Inter winding Capacitance: 0.01 pF Maximum
• Insulation Breakdown Strength: 2.5 KV
• Line Frequency: 45 to 65 Hertz
• Insulation Resistance: Greater than 100 M ohm
• Efficiency: Greater than 92 %
• Enclosure Standard: IP 11 to IP 23
• Brand: Trutech
•  :  

We are offering isolation transformer features input voltage (primary) : 230v (183v to 264v) or 115v (98v to 132v). output voltage (secondary) : 230v (183v to 264v) or 115v (98v to 132v). common mode noise rejection : more than 130db. dc galvanic isolation : more than 1000m ohm between any winding or winding to case. break down voltage : 2.5kv ac for 2 minutes between any winding or winding to case. acceptable line frequency : 46 to 56hz. input output termination : terminal strips. Optional facilities : (at extra cost) built-in transient suppressor limits surges & spike of 100v µs. built-in rfi emi suppressor. input cable with plug. output socket of required rating

• Brand Name: Starlit Electricals
• Capacity: 40 KVA
• Construction: Indoor Varnish Impregnated Dry type with
• No of Phases: 3 / 3 enclosure
• Vector Group: Dyn11
• Tapping Arrangement: Offline tap changer with tap changing
• Insulation Class: B / F Links
• Ratio: 433 / 433

In order to fulfill the demands of our clients, Starlit Electricals has been engaged in manufacturing a quality range of Lighting Transformer. Its primary supply connected to higher voltage 3Ph source and secondary is to be connected to load.   Lighting Transformers are designed to supply power to lighting equipments in a commercial / industrial / domestic unit. Its primary supply connected to higher voltage 3Ph source and secondary is to be connected to load. Lighting transformers serves as isolation between primary and secondary, it also restricts any high voltage spikes and EMF coming with the raw mains incoming power. Lighting Transformers are very useful when system neutral is not available or faulty i.e. where incoming supply is 3 phase 3 wire and lighting load is 220 Volt single phase. It also restricts short circuit current in the load and saves major accidents. Power House lighting transformers are made with CRGO laminations and Electrolytic copper super enameled winding wires. They are available for wide ranges of inputs out are in the range and in capacity from 1K VA to 100   KVA. Construction Lighting Transformers are two winding transformers with both windings made of copper. Electrolytic grade super enameled wires with best insulations are used. Core materials are CRGO Strip cores. Experienced hands with best machines for winding ensures best results with minimum size. Appropriate classes of insulation materials are used. Transformers are impregnated in insulating varnish for long lasting performance. Input and out are terminated on Glass Epoxy board with proper size of terminals. For Lighting Transformers greater than 30 KVA, usually a separate M.S Enclosure with temperature indicator is provided as shown in the drawing.  

• Phase: Single Phase, Three Phase
• Cooling Type: Dry Type/Air Cooled
• Frequency: 50 Hz
• Output Voltage: As per Requirement
• Usage/Application: Industrial
• Power Source: Electric
• Brand: Darade
• Wire: F Class Copper
• Bobbins: FRP
• High Voltage Breakdown: 2.5 to 3.5 kV as per standard for 1 minute
• Insulation resistance: More than 100 M ohms
• Terminal Connection: Touch Proof
• Overload Capacity: Minimum 10%

Isolation Transformers, Auto Transformers, isolation charger transformers

Ultra Isolation Transformer, Servo Controlled Voltage Stabilizer

One of the best leading supplier of distribution transformers.

lighting transformers, ht metering cubicle

Isolation Transformer, Servo Voltage Stabilizer, K Rated Transformer, Ups

Isolation Transformer, ground leakage monitoring system, Transformers