Kana Electromechs Kothrud, Pune, Maharashtra

Universal Calibrator is used for the calibration of many types of Process Control Instruments which accept mV, mA & RTD Input. This can be used as better tool for fault finding & confirmation of instrument sensor reliability, hence extremely useful for Commissioning Activity, Quality Assurance, Routine Maintenance & Trouble Shooting.

To sense the level of bulk material such as lime stone, coal, Iron ore, Pellets etc. stored in open yard or in a bunker, or hopper etc. The working of this switch is more simple than capacitance type level switch.

Microcontroller based Temperature Scanner is designed for fast and accurate measurement and control of the Process Temperature. The Scanner monitors & displays the Process Temperature as well as does ON OFF Control according to the Programmed Set Point.

These Switches are designed for Man and Machine Safety, to avoid accidents, and for stopping the Machine in case of Emergency. Pull Cord Switches are useful for emergency stopping of conveyors from any point by pulling the rope connected to the switch. Pull Cord Switch is mounted on both sides of belt conveyors preferably every 15 to 20 meters.

Microcontroller based Bag Filter Timer controls the cleaning cycle of Pulse Jet Bag Filter. This Timer is fully Programmable and has Digital Display to indicate all programming & Operating parameters. It can be used for On-Line as well as Off-Line cleaning. Different application specific models are available to cater Off-Line Cleaning, On-Line Cleaning with Off Line feature, Solenoid Fault detection, Multiple configurable Timers in one unit, Master Controller & Slave timer application, MODBUS PROFIBUS connectivity etc.

Power Transducers are designed for the purpose of monitoring the Active or Reactive or Apparent power drawn by Single Phase or Three Phase AC electrical loads. The power is electronically computed from the input signals from C.T. & P.T. in the electrical circuit and 4-20 mA or Vdc output (proportional to power drawn by the load) is provided. Solid state design using time division multiplexing technology. Individual models are available which measure Active or Reactive or Apparent Power. C.T. & P.T. based design permits use in L.T. as well as H.T. Circuits.

Audible warning alarms are used in many industries for starting or stopping or indicating the movement of heavy machines. This can also be used as fault indicating alarm to alert the operators & other personnel in case of fault.

This unit is designed to sense the open circuit and over current drawing of the solenoid during its Energization time (typically within 20mSec. to 200mSec.) and to give latchable relay output when input solenoid current exceeds the set value.

These Switches are designed for Man and Machine Safety, to avoid accidents, and for stopping the Machine in case of Emergency. In Belt Conveyors, belt swaying occurs due to uneven loading, misalignment of the idlers & due to worn surfaces. Belt Sway Switches are useful to restrict belt sway within the tolerable limits. Belt Sway Switch is mounted on both sides of belt conveyors preferably every 15 to 20 meters.