Laboratory Autoclave And Sterilizers Dealers in Bhandarkar Road, Pune

The UHT Sterilizer by HRS is based on ultra heat treatment technology and has a complete hygienic design to give the final output. It can be customized to suit varied capacity and a special provision for future capacity expansion is an additional advantage. Specially designed Ecoflux* Corrugated Tube Heat Exchanger based Aseptic Sterilizer, Provision to direct intermediate milk to deaerator & homogenizer.

• Feature: Integrated automated CIP for easy maintenance,HTST & UHT technology etc.

HRS advantage is extended to the dairy industry through state-of-art systems such as PHE based pasteurisers, chillers, inoculation tanks and many more solutions for milk, cream, whey, whey cream, yoghurt, curd milk and allied products. The UHT Sterilizer by HRS is based on ultra heat treatment technology and has a complete hygienic design to give the final output. It can be customized to suit varied capacity and a special provision for future capacity expansion is an additional advantage. This system works on the principle of sterilization which allows heating milk at ultra high temperature and then cools it to ambient temperature for further input to desired aseptic packaging line. UHT Sterilizer ensures correct quality of end product with its special features and PLC automation controls which enable flawless operation with minimal manual interference. It is programmed to perform CIP automatically and efficiently.

Technical data Applicable for the refrigerants R717 (ammonia, Nh3), HFC, HCFC (e.g. R22, R134a, R404a) and other refrigerants dependent on sealing materials compatibility within a temperature range of -30°C/+100°C Flammable hydrocarbons are not recommended.    Pressure setting range : 10-25 bar (145-363 psig) the valve is designed for strength test : 40 bar (580psig). Leakage safety: Same as set pressure. For further information please contact your local Castle Sales Distributor.   Important : The CSRVA safety relief valve is dependent on the back pressure (if the back pressure is higher than the atmospheric pressure, the opening pressure will be higher than stated set pressure) Special circumstances such as vibrations (which should be avoided) and oscillating pressure may require an increased difference between the operational pressure and the closing pressure.   Pressure Setting : The operating pressure of the plant should be at least 15% below the set pressure. This allows a perfect re-seating of the safety relief valve after having been activated. .   Temperature Range : -30/+100°C.

Sterilization Rolls is used for ideal sterilization packing in hospital and clinical use. We share glorious credentials in the list of top Exporters and Suppliers of Sterilization Rolls. We make available Sterilization Rolls in colors, designs and sizes in order to meet the variegated requirements of the customers. Customers can avail Sterilization Rolls from us at the most affordable prices. Attributes : High tear strength Convenient for packaging various instruments and items Blue tinted transparent film Long lasting usage Easy identification of damages due to puncturing or tearing Color process indicators  : Steam, form and EO Multi sealed

simply placing transformer in autoclave vessel under vacuum will not remove moisture form that. For evaporating water into steam latent heat of water is to be supplied.when transformer put in to the autoclave for drying heat energy is transferred to transformer via convection and radiation. Compared to convection energy transfer by radiation is very low. During vacuum drying as air is sucked out there will not be any transfer of heat by convection. This necessitates heating by hot air of sufficient duration,before vacuum drying in the autoclave vessel by externally either by thermic fluid heating systemelectric heating systemsteam heating by means of radiator coils inside autoclave or limpets welded outside the autoclave..

We are a prominent Supplier of the modern Laboratory Sterilizer, based in India. Our Laboratory Sterilizers are high pressure water steam electrically heated Sterilizers for Sterilizing of Surgical Instruments, dressing materials, linen, rubber, plastic materials, injection liquids etc, by means of Steam under pressure. Construction These are pressure type steam jacketed double/triple chamber sterilizers made from Stainless Steel. Inner Chamber is made from 304 quality 10 swg. S. S. Sheet, steam jacket is made of 14 swg S. S. Sheet and the outer cover in made of 24 swg S. S. Sheet. The lid and ring are also made of suitably thick S. S. Sheet. All the joints are Argon Arc welded. The lid is closed by wing nuts/Radial Arm arrangement. A joint less Neoprene Gasket prevents any leakage. The complete structure is mounted on strong tubular frame. The outer chamber of the vertical Sterilizer is however made of Mild steel. Boiler & Chamber (For Horizontal Models) The Boiler, made of corrosion resistant 18/8 quality S. S. Sheet, suitable to the size of the sterilizer, is fixed below the working chamber placed on the tubular frame, with suitable immersion heaters and a low water protection device. A perforated S. S. Tray is provided. The lid is made of Gun Metal, covered with S. S. lining. An automatic self locking Device is provided. Pressure/Temperature/Insulation A working pressure of 15 - 20 Ibs psi, (adjustable) can be created hydraulically tested up to 2.5 times of the working pressure. Neoprene Gasket prevents the loss of pressure. The Jacket is insulated with glass wool to minimize the temperature loss (maximum temperature 126 DC approximately). Safety Features At the top of the Horizontal Sterilizer, multiport operating valve, Pressure, Compound Gauge and Safety valves (spring loaded) are fixed. The Sterilizer is provided with self sterilizing vaccum Drier/Breaker, Dial Thermometer, Plug Screen, Steam Trap, Non Return Valve, Water Level Indicator and Automatic Low Water Cut-off Device. The Vertical Sterilizer is provided with Double Device-Pipe safety valve, wet safety valve, Steam release cock, a pressure gauge and Water level indicator. Power & Controls The Sterilizers are electrically operated on 440 volts A. C. supply, three phase. A control box on the side, houses the 'MAIN', 'LOAD' and 'LOW WATER' indicating lamps with their toggle Switches, a pressure control knob and CUITLER HAMMER MAGNETIC CONTACTOR. Our Laboratory Sterilizer is supplied with suitable length of wire in Plastic Molded flexible casing and Instruction Manual. The Vertical Sterilizer operates on 220 / 440 volts A.C. supply.

• Insulation Wall: Single Wall
• Type Of Dental Chair: Fixed
• Operation Mode: Electrical
• Size: 300 x 150 x 100 mm
• Application: Dental Treatment,Dental Surgery,Dental Examination

The outer chamber is made of heavy gauge stainless steel Inner chamber, Lid, support ring & support legs are made of complete stainless steel ( 304 grade ) dully polished. Unit is supplied with Radial locking system, Pressure gauge, spring loaded safety valve, water inlet, water outlet, steam release valve, water level assembly, paddle lifting arrangement. Control box fitted with Pressure control switch, low water cut off,

• Application: Packing Medical Device, Surgical Use
• Thickness: 110-130Gsm, 130-150Gsm, 50-70Gsm, 70-90Gsm, 90-110Gsm
• Color: Creamy, Off White, White
• Feature: Bright Color Transfer, Eco-friendly, Fast Transfer Time, Fine Finished, Strong Adhesion, Tear Resistance
• Pattern: Plain
• Condition: Good, New
• Width: 100-150cm, 15-200cm, 200-250cm, 250-300cm, 300-350cm
• Packaging Type: Box, Carton, Roll

air sterilizers, Air Ionizer, Air Purifier, Hospital Equipment

medical autoclave, Hospital Equipments, intestinal surgical equipments

Water Heater, Industrial Ceramic Heater, Porcelain Heater

Water Heater, Solar Street Lights

Steam Sterilization Rolls, Absorbable Medical Underpads, Tyvek Gusset Pouch

Safety Valves, Bellow Seal Valve, condensate recovery system

Water Heater, Air Preheaters, Finned Tube Economizer, grilled economizer