Lathe Machine Spare Dealers in Bhosari, Pune

This permanent magnetic chuck guarantees outstanding performance and reliability. The rigid assembly of these chucks result in accurate grinding and milling. The selected pole spacing ensures the maximum possible grip on a wide section of work-pieces. Using an additional top plate can accommodate all types, sizes and shapes of work-pieces. The magnet used is ‘NdFeB’. This magnet is very powerful than ‘AlNiCo’ magnet. Under ideal conditions the test result show that the holding power/Cu.Inch is 55Kg., which is much bigger than ‘AlNiCo’ magnetic chuck.

• Length: 1 meter,
• Diameter: 4mm, 100mm
• Application: Concentric Testing

Concetri

• Material: Stainless Steel
• Length: 50 - 150mm
• Capacity: 75-125 Blunt
• Brand Name: Turnmax
• Surface Finishing: Polished

Syncro Soft Tapping Chuck compensates the error between spindle & feed on threading tools like cutting or rolling taps. High concentricity of holder improves tool life. Positive clamping through ER collet system & positive drive with the help of tap driver insertion. No special tool holding collets (Like collets with square) Chuck body internal taper, clamping nut & collet are protected from rotation in operation. With the insertion of tap driver can be used to the full extent of chuck capacity. ER 40 nut max. clamping torque for is 141Nm. Means M22 78" UNC tapping (Max tapping torque 80% breakage value) with tap driver in the same chuck M30 tapping 1 - 18" UNC is possible.

For Heavy Duty Milling Machine "Crystal" brand Electroperm Magnetic Chucks ensure higher magnetic and mechanical performances, as well as absolute reliability, when compared with conventional chucks. Electriperm Magnetic Chuck is "COLD" device, not subject to internal wear or deformation resulting from moving internal parts. Our Electroperm Magnetic Chucks do not consume electrical power except for the very short period of activation or deactivation of the working surface. Once fixed to the machine table Electroperm Magnetic Chucks will be geomertrically stable as the table itself.Electroperm Magntic Chucks are economical for operation and maintanace. Electroperm Magnetic Chucks Produce magnetic clamping system for the Most Powerfull Machine tools available. Systems are switched ON or OFF with simple electrical pulse. Electroperm Magnetic Chucks are entirely independent of external power supply when holding work pieces. There is no risk,when power fails. The de-magnetization cycle of Electoperm Magnetic chuck eliminates possible residual magnetism in the workpiece,therefore easy release for high alloy steel parats. They are designed for heavy operation such as milling cut of 3 to 6 mm depth at recommended speed & feed.

There is no risk,when power fails. The de-magnetization cycle of Electoperm Magnetic chuck eliminates possible residual magnetism in the workpiece,therefore easy release for high alloy steel parats. They are designed for heavy operation such as milling cut of 3 to 6 mm depth at recommended speed & feed.

We are trusted manufacturer, exporter and supplier of testing mandrel in pune. Manufactured high graded steel, the hardened testing mandrel is known for the high quality and precise make. The mandrels are further stabilized by sub zero treatment for better life and stability for years together. We offer test mandrels with morse taper shanks, self release taper shanks and plain parallel mandrels. Tapered mandrels having a conical shank for inserting into the socket of the machine to be tested has a cylindrical body, which is used as a reference surface for the measurement. In alignment test, the cylindrical surface of the mandrel represents the axis desired to be checked, for out of true either running or for position in relation to other elements of the machine tools. plain mandrels are used between centers, are simply to represent a straight-line passing between two points. The axis is made straight and exterior surface truly cylindrical having an accuracy of 3 microns over 300mm length. demanded by automobile industryproduction industryelectronic industrymechanical industry

Permanent Magnetic Rectangular And Circular Chucks Permanent Magnetic Chucks Are Designed To Hold The Work Piece on Surface Grinding Machine. These Chuck Are Manufactured For Normal as well as For Heavy-Duty Operations. Chucks Are Designed And Manufactured According To Job. It Consists of Powerful NdFeB Magnets Hence It Generates More Power So That Highter Stock Removal Is Possible. Heavy Duty Permanent Magnetic REctangular Chucks Size (In mm) L x W x H Magnetic Pole Gap 175 x 125 x 60 16 200 x 100 x 60 16 200 x 150 x 60 16 250 x 150 x 60 19 300 x 150 x 60 19 300 x 150 x 65 19 350 x 200 x 65 19 450 x 150 x 65 19 450 x 200 x 70 19 500 x 200 x 70 19

• Brand Name: Crystal
• Size: 200 L x 150 W x 65 H mm
• Bottom Plate Length: 230 mm
• Magnetic Pole Gap: 14 mm
• Magnetic Pole: 16 mm

• Type: Permanent Magnetic Chucks
• Shape: Round
• Application: Industrial Use
• Voltage: 110V, 220V
• Application: Industrial Use
• Power: 1-2kw
• Power Source: Electric
• Warranty: 1year
• Surface: Polished

We are dependable Manufacturer, Supplier and Exporter of Electroperm Magnetic Round Chuck for Turning UL-821, to a broad clientele of national and international stature. The Circular Electroperm Magnetic Round Chuck for Turning UL-821, provided by us, acts as a cost-efficient holding device for surface grinding and other types of grinding mechanisms. The Circular Electro permanent Magnetic Turning UL is available at low price. Highlights Work holding device for surface grinding machines. Cold device as it doesn't require power continuously except for short period of activation and deactivation. Parallelism and flatness is 0.010mm/ 300mm. Suitable for thin and small jobs. Economical for operation and maintenance. Uniform clamping force all over surface. Negligible power consumption. No accidents due to power failure. Slippering force is 2.5 kg/cm2. Vertical Lifting Force is 35 -40 kg/cm2. Variable supply unit to vary power which helps in alignment and removing of warpages of thin jobs. Chuck is tested for Slippering force, Waterproof test, Electrical and Demagnetizing tests. Standard electrical accessories. We also manufacture special chucks to suit individual requirement.

• Material: ss
• Country of Origin: Made in India
• Usage/Application: Tube Bending
• Brand Name: Piyu Enterprises
• Color: na
• Automation Grade: Automatic

Courtesy a state-of-the-art warehousing unit and an ultramodern inventory control system, we take care of product storage related work with ease. Our warehouse and system empowers us to maintain year round products' availability. As a customer-focused firm, we strive hard to delight them with high quality range of products that are the perfect outcome of premium raw material and modern work methods.

MagTech Electromagnetic Chucks’ are designed for GRINDING operations. It generates strong magnetic force to hold work piece in rigid manner. These chucks are operated on D.C. Power Supply. There is no internal wear and deformation corresponding to movement of internal parts, which provides a better life than conventional ‘Permanent Magnetic Chuck’. The following photograph can explain the product and its utilization briefly. These chucks are very useful as work holding device on Cylindrical Grinding m/c to grind outer diameter & face component as bearing recess, flanges, collect bushes, discs etc.

• Feature: Perfect Finish
• Application: Commercial Use

chucking tools, machinery tool

• Material: Cast Iron
• Surface Finish: Polished
• Diameter (mm): 5 – 10

We are the wholesale Face Driver supplier in Pune. Supplying best quality drivers to the Industries and companies all over India.

• Material: HSS, Mild Steel, Stainless Steel
• Condition: New, Used
• Finishing: Coated, Polished
• Features: High Quality,Fine Finished,Long Service Life,Optimum Performance
• Colour: Black,Silver,Shiny Silver
• Application: Industrial

Spline taper mandrel, pin gauge, width gauge, thread ring gauge

four jaw dog chuck, power chucks reconditioning services

Magnetic Chuck, glass edge polishing machine, Pneumatic Grease Pump