Level Controllers Dealers in Bhosari, Pune

• Supply: 110/230 VAC, 24VDC
• Input: 4-20mA
• Mounting: Panel / Wall
• O/P Relay: 4 x 5A, 230VAC

• Display Type: Digital
• Frequency: 50 - 60 Hz
• Humidity (%): 35-85% RH
• Ambient Temperature: 0-50 Degree C
• Rated Voltage: 230 V AC
• Rated Current: 5 Amp
• Timer Type: Digital
• Automatic Grade: Automatic

• Type: Water Level Controller
• Application: Controls Water Level
• Weight: 10-20kg, 20-30kg, 30-40kg, 40-50kg, 50-60kg, 60-70kg, 70-80kg, 80-90kg, 90-100kg
• Color: Blue, Green, Grey, White
• Voltage: 110V, 220V, 380V, 440V
• Condition: New, Used
• Automatic Grade: Automatic, Fully Automatic, Manual, Semi Automatic
• Power: 1-3kw, 3-6kw, 6-9kw, 9-12kw
• Warranty: 1year, 2years
• Driven Type: Electric, Hydraulic, Mechanical, Pneumatic

• Input : Electrical, RTD ( Pt - 100 ) or Thermocouple
• Transmitter Supply : 24 VDC
• Output : 0/4-20 mA or 0-10 VDC Optional ( isolated )
• Indication : 4, 5, 6 digit LED Display as required
•  : 16x2 LCD with back light
• Power Supply : 230/110 VAC, 24 VDC
• Accuracy : Better than ± 0.2 % of FS
• Alarms : 1/2/3 Nos.
• Interface : RS 485 / MODBUS RTU / ASCII
• Mounting : Panel / field

• Power Supply: 8V - 32V DC

the cost effective control solution for low-kVA genset engines. It is easily configurable firmware monitors engine & genset safety parameters and takes suitable control actions.Genset controller with 5 digital inputs, 3 analog inputs and 6 digital outputs.

• Feature: Universal inputs- T/C, RTD, mA, V, High accuracy of 0.1% FS , Upto 4 independent programmable relay output
• Brand: Masibus
• Display Type: 4 Digit/7 Segment
• Model No.: LC5296-DC
• Size: 96 x 96 mm
• Control Type: PID/On-Off
• Input Type: Current (mA), Voltage (mV), RTD
• Power Consumption: Less than 10VA
• Accuracy: +-0.1% of FS
• Mounting Type: Panel
• Frequency: 50 - 60 Hz
• Case Material: ABS Plastic
• Case Color: Dark Grey
• Weight: Less than 2kg
• Dimensions: 96(W) X 96(H) X 200(D) mm
• Panel Cut Out: 92 mm X 92 mm
• Wiring: Cable wire upto 2.5 mm
• Power Supply: 110/230 VAC(+-10%) @ 50Hz

lighting automation system, SIGNAL TRANSDUCERS, SWITCHED MODE POWER

• Features: Excellent finish ,Precise , Durable.

PROGRAMMABLE SINGLE LOOP P-I-D CONTROLLER (For Controlling, Regulating And Monitoring Process Parameters) Series mCS 5500 Features  Autotuning provided   Universal Input Communication port provided optional Bargraphs / D igital Read-out for deviation, output and set-point Remote Set-point (Cascade input) provided Isolated 4 to 20 mA Control Output SCR output / Relay output for controlling motorised valves Optional retransmission output Two alarms provided on Process Variable, Set-point, Deviation, Output Built-in two-wire transmitter supply Various Cutouts and sizes Single Chip design for ruggedness and low cost

We are offering powder level controller. find application in food , packaging , cement, steel & power generation industries for monitoring level of free flowing products like ore, fertilizer, food grains, coal, sand, chips, granules etc. Ideal for products that do not have heavy build-up on fork. Can sense dense materials like cement. It also senses extremely light products like styrene. Not recommended for mud, slurry, sticky material or water with high turbidity. operating principle: vibrating fork level switch contain piezo-electric crystal in the probe, which causes the fork to vibrate at a frequency of 125 hz. It detects the presence or absence of material and actuates a relay. It gives point output, indicating high & low level alarm. It is having compact and robust design, suitable for side & top mounting. The constant vibration of the fork provides self-cleaning characteristics. The change in vibration is detected by circuit which causes the relay to change state after few seconds delay ( about 2-3 seconds). When fork is free from material relay reverts to its normal condition

• Voltage: 180-260 VAC
• Current: 4.5 Amp
• Supply: 230 VAC/50Hz
• MountingWall Type: Wall Type
• Output Voltage: 0-260V
• Display Method: LED Digital Tube
• ON/OFF DelayAccuracy: 0.1 s
• Soft Startup Time: 10 s

We are working with a group of professionals who make special emphasis on the products packaging and ensure that the material is procured from the reliable sources only. In order to ensure product compliance with stated quality norms, we conduct several tests at several stages.   Details : Power ON LED : It indicates the power supply to the unit. Motor ON LED: It indicates the motor ON and Off Condition Tank Level Indication LED: Two level visual indications – 25% (Low Level), 75% (Tank full level). Motor will automatically switch ON when the water level in the tank is low and automatically switch OFF within 1 second when the tank becomes full.   Manual Mode: Helps to switch ON the motor manually. In this mode, the motor will be running till the tank will be full . The product having special features of two relays for submersible Pump. one for starting capacitor and other for running capacitor. The three sensor electrode indicates the water level of the tank. Helps in preventing overflow of water from the overhead tank Input Voltage- 230V to 275 V(AC) Output Contacts-2 NO  Long Life Easy to install Application: Automatic Microcontroller Based Water Level Controller is of much used in metro cities, bungalows, industries, hospitals and in luxurious apartments and homes. Use of this product saves water, saves electricity and saves time. Useful in case of bore well to tank set up. Booster Pump Control Panels Textile Machineries Garment Machineries Water Distribution Pumps House Submersible Pump Control Panel Package Boiler in Sugar Factory Heat Exchanger Steam Generators     Advanced Microcontroller Based Water Level Controller (Auto Change Over)   Dual pump operation.   Control Sump (open well) pump as well as Bore well pump with automatic changeover technology   To suit where both the motors are used to pump water to Common overhead tank (Single Tank)   Three modes of operation.      OpenWell (sump) mode      Bore well mode.   Automatic Change Over Mode (Dual Mode) Four stage water level indicator for over head tank, Three stage water level of sump Water flow indication(Running Line), Over and under voltage level indication and protection By Pass facility in case for direct operation. Manual Soft Touch ON / OFF Support both Single Phase & Three Phase connection Easy integration with control panel Basic Microcontroller Based Water Level Controller  - WLC-01Single tank - 2 level control relay   Indications – Empty Full Motor ON/OFF Control Switches Auto/ Manual Switch Relays 2 relay output. Relay Rating - 10A at 240V Sensors 3 Sensor stainless steel PVC coated Protection Type  Dryrun   Compatibility : Single phase starter panel Compatible Three phase starter panel Compatible   Microcontroller Based Water Level Controller for Upper Tank and Lower Tank (SUMP) - WLC-02   Dual tank - 2 level control relay   Indications –   Empty Over Head Tank   Full Over Head Tank   Empty Sump   Motor ON/OFF   Control Switches   Auto/ Manual Switch   Relays   2 relay output.   Relay Rating - 10A at 240V   Sensors   4 Sensor stainless steel PVC coated   Protection Type   Dryrun   Compatibility   Single phase starter panel Compatible   Three phase starter panel Compatible Online Microcontroller Based Water Level Controller - WLC-03   Dual tank - 2 level control relay   Indications –   Empty Over Head Tank   Full Over Head Tank   Empty Sump   Motor ON/OFF   Control Switches   Auto/ Manual Switch   Relays   2 relay output.   Relay Rating - 10A at 240V   Sensors   4 Sensor stainless steel PVC coated   Protection Type   Dryrun   Compatibility  Single phase starter panel Compatible Three phase starter panel Compatible Basic Microcontroller Based Water Level Controller Reverse Type- WLC-04Single tank - 2 level control relay When tanks gets full pump gets ON to siphon the water out of the tank and then tanks gets empty pumps gets OFFIndications –   Empty   Full   Motor ON/OFF   Control Switches   Auto/ Manual Switch   Relays   2 relay output.   Relay Rating - 10A at 240V   Sensors   3 Sensor stainless steel PVC coated   Protection Type   Dryrun   Compatibility   Single phase starter panel Compatible   Three phase starter panel Compatible

• Brand Name: USIS
• Output: 4 to 20 mA
• Range pH: 0 to 14 pH
• Enclosure: IP54

• Voltage: 220V
• Display Type: Digital
• Automatic Grade: Automatic
• Power: 1-3kw
• Driven Type: Electric
• Warranty: 1year

motion control systems, SINKER EDM, ac servo motors

• Type: Motion Control System
• Brand Name: Intex, LG, Panasonic, Philips, Samsung, Sony
• Certification: CE Certified, ISO 9001:2008
• Color: Black, Blue, Grey, Silver, White, Z-black
• Voltage: 110V, 220V
• Condition: New, Used
• Display Type: Analogue, Digital
• Driven Type: Battery, Electric
• Warranty: 1year, 2years

We are the main supplier of this product.

Variable Voltage Digital controler for vibratory Feeder LED Digital Display Soft Startup ONOFF Control ONOFF Delay

The batch house controller provided by us are used to process, fine-tune and control capability of common packages. Manufactured using advanced programming interface, our batch house controller comprises features like: analog display panel backlit lcd displays four-button keypad to adjust the batching system