Load Banks Dealers in Pune

• Brand Name: VSOFT
• Display Type: Digital Display
• Type: Dc Electronic Loads
• Country of Origin: India

Electronic Load Bank is high quality and high performance single channel as well as multi-channel bank. It comes with seven segment display based meters for current and voltage measurement and rotary knob for current adjustment.

• Features: Hassle free work performance, Easy to use, Modern technology

It comes with superior voltage / current resolution and makes ot ideal for testing pf power source in ypour work bench. These load Banks are for laboratory as well as for industry usage. LOAD Bank is supplied with MS Powder coated panel and front panel is provided with all metering devices and accessories.   5KW,8KW,10KW Wire Wound Resistors Short Circuit, Overheating, Over Current, Over Voltage protection     Address  

• Brand Name: VCS
• Frequency: 50Hz
• Features: Robust Design , Simple and Easy Maintenance.
• Voltage: 240-440 V
• Material: MS
• Phase: Three
• Usage/Application: Health Care and Hospitals, Utility Substations
• Power Ratings: Upto 500 kVA

• Type: Resistive Load Bank
• Brand Name: VSOFT TECHNOLOGY
• Color: Grey
• Condition: New
• Output Type: DC
• Frequency: DC
• Automatic Grade: Manual
• Feature: Easy To Install, Proper Working, Sturdy Construction, Superior Finish
• Cooling System: Air Cooling
• Warrenty: 1year
• Production Power: 35KW
• Temperature Capacity: High Temperature, Medium Temperature

• Frequency: 50 Hz / 60 Hz
• Power: 1 Kw t0 100 Kw
• Capacity: 1 Amp to 100 Amp
• Dielectric Strength: 2 KV
• Voltage: 230V / 415V
• Temperature: 40 deg C
• IP Grade: IP-23
• Usage/Application: Loading and Testing
• Brand: Trutech

• Type: Load Banks
• Certification: ISI Certified
• Color: Green, Grey, Light Green, Sky Blue, White
• Condition: New, Used
• Output Type: AC Single Phase, AC Three Phase
• Frequency: 50hz, 60hz
• Automatic Grade: Automatic, Fully Automatic, Semi Automatic
• Tensile Strength: 0-25Mpa, 100-125Mpa, 125-150Mpa, 150-175Mpa, 175-200Mpa, 25-50Mpa, 50-75Mpa
• Feature: Easy To Install, Electrical Porcelain, Four Times Stronger, Proper Working, Sturdy Construction, Superior Finish
• Cooling System: Air Cooling, Oil Cooling
• Production Power: 100-250kw, 250-500kw, 50-100kw, 500-750kw, 750-1000kw
• Temperature Capacity: High Temperature, Low Temperature, Medium Temperature

    Features   • Hard wearing • Electric current leakage proof construct • Low maintenance • Metal enclosed unit • Equipped with load break switch • Longer service life   Product Details   • Load bank upto 125 kVA and expandable upto 500kVA available • Manufacture as per order

  We are engaged in offering of Load Banks for Industrial Automation. Known for its compact structure and high level of efficiency, Load Banks are highly appreciated in the market. What Is Load Bank : Load banks are compact units that are coupled to the output of your power generation system such as diesel generators, gas turbines or UPS and battery systems Load banks are dummy loads, designed to simulate the plant load and prove the design, performance and the capacity of the system, without interruption to the normal running of your plant WHAT DOES A LOAD BANK DO : Generators are usually rated to supply sufficient power to a plant or building, based on the maximum demand required. Sufficient plant loading is not always available to safely load generators. Under loading of the engine will cause a high wear rate due to insufficient fuel combustion and loss of lubrication resulting in cylinder bore glazing and fouling of exhaust ports and valves. Running the generator without load will not prove its performance or power capacity. Proper and controlled loading is therefore essential. It increases diesel engine life by up to four times and improves the efficiency by ensuring that the engine has sufficient loading at all times. It proves the rated power, proves system operation, controls integrity and communications of your power system. It maximize battery life in UPS systems by regular loading and discharging. Specifications : Power ratings available : 1KW / 2KW / 5 KW / 10KW Voltage Primary : 440V AC 3Phase/ 220V AC Single phase /220V DC Enclosed in cabinet with Steps provided for loading, meters provided for each phase & terminations brought out on Banana terminals

• Frequency: 50 Hz
• Power: 20w to 4 MW
• Voltage: 440 V
• Usage/Application: multi
• Material: Aluminium Body
• Surface Finishing: Powder Coated

This is a modular system which can be configured by the user to use for DC constant current loads up to 200 Amps at voltages up to 60 V. There are 2 modules of 10 Amp & 20 Amp each. Each one has a Potentiometer & an ammeter to set the load current. All of them can be cascaded to achieve the required load OR all can work independent. There is digital input to each load which will put ON or OFF the load. A PLC can be used ( which we can provide ) to program a ON / OFF cycle & a cycle count to ensure that the load current is ON & OFF for a given time & programmed number of cycles.   Typical application includes wiring harness testing for the automobiles, educational training, etc.We can also provide suitable Power source for your load. This together can make a complete system. All the products are industrial grade.

• Power ratings available: 1KW / 2KW / 5 KW / 10KW
• Voltage Primary: 440V AC 3Phase/ 220V AC Single phase /220V DC

Load banks are compact units that are coupled to the output of your power generation system such as diesel generators, gas turbines or UPS and battery systems Load banks are dummy loads, designed to simulate the plant load and prove the design, performance and the capacity of the system, without interruption to the normal running of your plant

• Color: Silver
• Type: Electrical
• Features: Excellent performance,Highly reliable,Feasible,Easy to use & install
• Brand: CERMET
• Power Range: 0.5 - 10 W
• Resistance Range: 0.1 E-100 E to 0.1 E-10 K
• Series: CLB

• Frequency: 50Hz
• Power: Upto 5KW
• Voltage: 110V AC - 240V AC
• Brand: KWK
• Capacity: Upto 5000W
• Temperature: Normal Room Upto 45 Deg Cel
• Shape: Rectangular Box
• Material: Mild Steel
• Grade: A
• Display: Digital
• Hardware: Resistors
• Phase: Single
• Power Source: AC
• Tolerance: +/- 5%
• Surface Treatment: Fine Powder Coated

electronic dc load, SMPS, scr or smps, Digital Indicating Controller

Load Banks, lt fcma soft starter, ht fcma soft starter, high speed motors

MD Electricals manufactures various types of load banks for practical purpose to loading output of generators alternators. MDE provides resistive inductive capacitive type load banks from 2 A - 20 A per phase.

Load Banks are used as a dummy load for generator. We are manufacturing load banks from 5KW to 3000KW.

load bank, dynamometer, transmission test rig