Lube Oil System Dealers in Pune

Lubcon Engineers Air Plus Oil Mix Lubrication System are designed for applications where minute amount of metered lubricant is required to be applied on a surface.   Lubcon Engineers Air Plus Oil Mix Lubrication System are designed for applications where minute amount of metered lubricant is required to be applied on a surface. The lubricant is metered using an oil injector and is carried to the mixing block where the air and oil get mixed. The air breaks the oil into minute droplets and carries it to the lubrication point. The mixture is then passed through the nozzles creating a fine spray of oil which can be applied on any surface. Air oil mix systems are used for conveyors, high speed spindle, band saw machines etc. The advantages of air oil mix system over conventional mist system are: More reliable than conventional venturi type mist systems More eco friendly More easily controllable No dripping Air Oil Mix 

To cater this need CEE DEE VACUUM provides a solution with supplying oil storage tanks. There are different types of these tanks. The tank and capacity can be designed to suit the application and are available in the following categories: Mobile (Capacity range 1KL - 35KL), With Insulation, Without Insulation.

In this system minimum quantity of oil is pushed by air in a narrow spiral tube and the tube is connected to the part of machine to be lubricated. The component of the machine / bearing is continuously supplied with droplet of oil. The air caries the oil droplet to the bearings & very small quantity of oil is supplied to bearings by using Lubomatic air-oil lubrication system the quantity of oil is precisely controlled. By using Lubomatic Air-Oil Lubrication system the machine can be operated at higher speed and productivity can be increased. The dust & dirt near by the bearings is forced away from the bearings and the bearing is kept clean & cool and lubricated. The air oil Lubrication is used in Grinding Machine Spindle Bearings Lubrication. Gear box lubrication of any machine. Rolling Mill bearing lubrication. Internal Grinding machine Bearing. Machine Slides Gear Train Conveyor chains ADVANTAGES The oil consumption is reduced considerably, compared to Oil-Mist lubrication. Reduced temperature of the bearings and the machine can be run at higher speed& inturn increase in the production. Due to continuous supply of fresh oil & air in right quantity. The bearings are protected from out side contamination & only minimum quantity of oil consumed. No mist in shop floor to breathe but only clean air.

• Features: Rigid construction, Fine finish, Optimum quality

TURBINE LUBE OIL SYSTEM, Grit Blasting Unit

Lube Oil Systems, fuel gas handling system, offshore gas handling system

centralised oil lubrication system, Grease, Lubricant Oil, centralized oil

Metapow - We take pleasure in introducing ourselves as a renowned manufacturer and supplier of a wide variety of lube oil system in India.

Lube Oil Filtration System, Industrial Bucket Simplex Filters

Forced Oil Lubrication System, overhauling services, lubrication pumps

Oil Air Lubrication System, Single Line Lubrication Pump Unit, Ball Valves