Matchless Enterprises Sinhagad Road, Pune, Maharashtra

Packaging Type : Carton Box

Application : Textile Industry

Thruster rail clamps Thruster rail clamps are used in moving machines like travelling trippers of coal handlingrnplant, gantry cranes and semi gantry cranes. Thruster rail clamp is attached to the travellingrnbogie of the moving machine one or two numbers per rail. in case of travelling tripper, even though it is stopped by shutting off the drive, the running tripper belt drags the tripper on the rail. To avoid this dragging, thruster rail clamps are used. In case of gantry and semi gantry cranes, thruster rail clamps are used to hold the cranes to the rail in case of storm and avoid toppling. Operation of thruster rail clamp – when the machine power is put on, the thruster operates, opening the clamp against spring force and the machine moves freely on the rail. When the power to machine is shut, thruster is shut, closing the clamps on the rail with the spring force. Depending upon the clamping force required, following models are available - No.    Model    clamping force  thruster    thruster stroke 1.     TRC 500       500 kg           50 kg    50 mm 2.     TRC 1000    1000 kg          80 kg     50 mm 3.     TRC 2000    2000 kg         120 kg    60 mm 4.     TRC 3000    3000 kg         200 kg    60 mm 5.     TRC 5000    5000 kg         300 kg    60 mm Tailor made design of thruster rail clamp is also possible.

Spinning machine spare parts and assembliesrnwe have developed various types of spin pack assemblies, components of spin pack - except spinnerrettes, components used in yarn path, finish application systems, quench chambers, mfa boxes etc. We have also developed various pump shaft assemblies, tongues, m.p. Couplings etc.

Feature : Accurate dimension,Accurate dimension

Matchless hydraulic rail clamps Hydraulic rail clamps are used in bulk material handling equipment like stackers, reclaimers or in gantry cranes. In case of storm, high speed winds tend to topple these machines. Hydraulic rail clamps hold them securely to the rail and protect them against high winds. Arrangement – one rail clamp is provided on each rail with a common hydraulic power pack. As the operator puts the rail clamp on, hydraulic cylinder opens the rail clamp jaws against spring force and as the rail clamp is shut or in case of power failure, the rail clamp is shut with spring force – jaws hold the rail securely. Salient features – hydraulic power pack motor is not “on” throughout the operation. As the rail clamp is opened the motor is shut and pressure is maintained in the system. If the pressure drops below the set limit then motor will restart and build pressure to maximum limit and will shuts off. Safety features – 1.we have provided oil level switch. If oil level in the power pack tank is low then motor will not start and clamp will not open. 2 we have provided limit switch showing rail clamp open. If rail clamp open signal is not received then travel drive motor will not start. 3 in case of power failure, rail clamp will be shut off. We have developed following models of hydraulic rail  clamps sr.no.  model   clamping force on each rail 1.        HRC 5     5.0 T 2.        HRC 10   10.0 T 3.        HRC 15   15.0 T 4.        HRC 25   25.0 T

Brand Name : Matchless

Application : Bulk Material Handling Equipment Like Stackers, Reclaimers Or In Gantry Cranes

gathering unit function - gathering unit consist of gathering arms, cutter and aspirator. For winders winding 8 threads or 12 threads, instead of providing cutter aspirator per thread, one gathering unit is fitted above the winder. If any of the threads breaks, yarn sensor will a give signal to gathering unit. The arms of gathering unit will collect remaining threads, bring them to center, cutter will cut the same and aspirator will start sucking the cut threads. Similarly when doffing is completed, signal will be given to the gathering unit and above action will repeat. advantages � since one cutter and one aspirator is used instead of 8 or 12, compressed air is saved substantially, reducing operating cost. Threading from aspirator to winder becomes easy and avoid wastage. Thus production losses are reduced substantially. Rntailor made design � we can design gathering unit suitable to your existing yarn path.