Mist Collectors Dealers in Bhosari, Pune

• Country of Origin: Made in India
• Brand Name: KPT
• Material: Stainless Steel
• Shape: Round
• Model Number: PS-3
• SS Grade: SS304
• Diameter: 500mm

We are engaged in the manufacture and supply of superior quality Demister Pads in the industry. The Stainless Steel Demister Pads ( Mist Eliminator ) offered by us are used for carry over particulate matter by gas or vapor, generally termed as "Entrainment" is commonly encountered in Gas-Liquid separations. They are cost- efficient means of separating Entrained liquid droplets from gas and vapor stream. Demister Pads are installed at some distance above the surface of liquid that allows free disengagement of mist droplets and the coarsest particles. Construction : Demister Pads are essentially porous blankets of carefully knitted wire or synthetic fibers designed and constructed to efficiently abate mist particles. After knitting each layer is corrugated and converted into Pads of different shapes and sizes. The Demister is generally supported by Grids as they are not entirely rigid. Efficiency : When properly designed Demister Pads can give Efficiency up to 99.9% with minimal pressure drop. Normally Demister Pads can remove droplets down to 5microns and lower with a free volume of up to 99% and a surface area of up to 1940 m2/m3. Due to high value of free volume the pressure drop across the demister pad is sufficiently low, negligible for most applications. Function : Demister Pads are installed at some distance above the surface of liquid allows free disengagement of mist droplets and the coarsest particles. The vapour/gas-liquid mixture run at a predetermined velocity through the Demister Pad, the vapour/gas finds an open path through the mesh easily, but due to greater inertia the droplets and mist impinge on the mesh and gradually increase to a bigger size and fall down due to gravity allowing the vapour/gas to pass freely without any Entrainment from the top of the Demister Pad. Column Packing : It is used for efficient packing of Distillation columns, which operate at Vacuum or Atmospheric pressure. Column Packing are fabricated by knitting fine wires into a mesh then further crimping the mesh before rolling them for a desired column diameter. Multifilament mesh gives best results due to their capillary action and promotes excellent mixing in vapour stage. Advantages of Demister Pads Solves Emission control Problems. Eliminates or reduces damage caused to the equipment due to corrosive liquid droplets. Recovery of valuable liquids. Improves purity of gas/vapour for further processes. Improves overall process economics. Increases process efficiency. Materials of Construction : Demister Pads are made of a variety of Materials as per application demands. A few materials of construction would be synthetic fibers, copper, aluminium, Stainless Steel 304, Stainless Steel 316, Monel, Nickel, Brass, Phosphor Bronze, Carbon Steel, etc,. for different applications like corrosive services, nitric acids, water solutions, Freon, alcohols, fatty acids, corrosive chemicals, food products, hydrocarbons, caustic soda, dilute acids etc.

• Robust swivel - allows 360° rotation. • Encapsulated support mechanism protects the arm against dust and dirt. • Can be mounted on brackets, extension arms and rail systems. • With a damper in the hood - saves energy when not in operation. • The hose is easy to remove for cleaning. • The hood can be tilted in all directions.  

• Feature: Use of high definition machines,High efficiency,High tensile strength etc

Mist Eliminators are the widely used since they provide an optimum combination of efficiency and pressure drop at very low costs. As we are a leading Mist Eliminator Exporters, we can ensure you best possible quality product. To be confidant for our products, we use state of the art machinery and equipment, along with stringent quality control programs. Available in bulk range and fine quality, these can easily be used for any mass-transfer counter current process where effervescing take place, so as to put off liquid entrainment in the product

Demister Pad (Mesh Pad) : •In the most familiar application of knitted mesh, the crimped strips are stacked to form a pad with typical thickness of four or six inches. •Rigidity is provided by a frame—usually metal—consisting of a grid on each side and rods passing through the mesh. Pads larger than about three feet across are fabricated in sections narrow enough to pass through a manway for assembly inside a vessel. Such mesh can efficiently capture mist droplets as small as 5 microns (micrometers)

• Thickness: 6 inches
• Shape: Round
• Material: Stainless steel
• Packaging Type: Box
• Usage: Industrial
• Brand Name: FP

Easy to install High efficiency Improves product purity Increases throughput capacity

• Weight: 11kg
• Color: Blue

• Weight: 22 kg
• Brand Name: Megamech
• Voltage: 440 Volt
• Automation Grade: Automatic
• Size: 350(L) x 350(W) x 400(H) mm
• Inlet: 100 mm
• Noise: 63 dBA
• Suitable For: Air Mist
• Air Flow: 550 m3/hr
• Motor Power: 0.25 kW

• Size: 26x28Inch, 28x28Inch
• Type: Mist Eliminators
• Shape: Rectangular, Round, Square
• Thickness: 100-200mm, 200-300mm
• Application: Construction, Industrial, Public Use
• Weight: 20-40Kg, 40-60Kg, 60-80Kg
• Color: Available in Many Colors

The transactions related to payment carried out between us and our clients are kept confidential. You details are not shared with anyone except the concerned personnel to ensure high level of security. Our well-structured warehouse is the reason behind the safety of the products we offer. Moreover, we have installed advanced amenities essential for the safe storage of the lot.

• Efficiency: 99%
• Weight: 70 – 100 lbs
• Material: MS

We are one of the leading Mist Collecter suppliers in Pune. Providing the good quality, superior performance, resistance to corrosion and longer service life mist collectors all over India.

Industrial air filters for oil mists, fumes, nasty smells, dust and metal shavings for machine tools and industry.Greens Advantage systems differ depending on the specific needs of the single machine tools:centrifugal aspirators, static filters assembled to the machine, high flow-rate units or centralised systems for the abatement of whatever polluting mix. To satisfy all requirements effectively, all of our air filters are modular type and can be matched with a wide range of pre- and post-filter units.   Energy and oil savings Efficiency in manufacturing processes Easy installation and maintenance Compact and modular   Available in 4 models of centrifugal air filters, covers throughput ranges from 600 to 3300 m³/h. Thanks to patented and innovative technology, the ZERO MIST series, with interchangeable rotors turbine single centrifuge and double centrifuge, provides maximum performance at moderate costs. Horizontal and vertical installation possible. Expandable system with our pre-and post-filters, for removal of many kinds of pollutant at its source, eliminating oil mists and micro-mists, smokes, vapours and unpleasant odours. Wide range of accessories.

Extraction arm, Hose Reels

Pusher Centrifuge, pusher centrifuge machines, Mechanical Pusher Centrifuge

Demister Pads, Steel Cable Trays, Plain Woven Wire Mesh

mist collectors, Machine Shop Turnkey Coolant Management services

mist collectors, Oil Coolant Chillers, Electrical Panel Cooler