Mixing Valves Dealers in Pune

HAT/MIX valves can be used in any application in which a constant low flow rate (under 1 GPM) of water at a specific temperature is desired. These valves, like any mixing valve, must be installed with check valves on both hot and cold inlets. Pressure reducing valves are recommended on HAT/MIX installations in which system pressures are likely to vary. Pressure reducing valves should be adjusted to approximately 10-20% less than average system pressure for accurate and constant outflow temperatures. In some installations, throttling valves may be used in place of pressure reducing valves. These throttling valves should be set and locked for safety.   Design Features * Condensate temperature baths* Batching* Constant temperature basins & sinks* Water circulation systems* Low flow direct injection water heating (under 1 GPM)* Make-up water* Hot water tracing

The Coolant Mixing Valve is used for the accurate mixing of coolants for a measured performance. It relies on mixing zone design that helps in creating the strong waves of water vapor, which in turn breaks down the coolant concentrate into a homogeneous solution. The resultant fluid is good on stability with high lubricity and tramp oil rejection. The flow rate is based on operating water pressure and it is incorporated with semi-concealed metering screw for fine adjustment of mixing ratios.The Coolant Mixing Valves are mounted on drums and homogeneously combines the fluid concentrate with water in accurate ratios. Made from non corrosive stainless steel material it is simple to operate. Installation The Coolant Mixing Valve is installed by connecting it to the pressurized water supply. It comes with water inlet attachment and outlet hose that simply switches the water on and off and controls the mixer. Dilution Range : 0.5% - 15%Maximum Flow Rate : 30 LPMAvailable Capacities : 205, 25 and 20 liters Applications Adjustable mixing ratio Sturdy structure Simple to operate Excellent implosion prevention   Models available: Standard Coolant Mixing Valve for drums having capacity of 250 liters Model featuring short feed hose and drum adaptor for the drums having capacities 20 liters and 25 liters. This model is designed with neck adaptor to prevent implosion while drum gets empty

Thermostatic mixing valves high capacity, Setter Tronic UN

mixing valve, Inline Flow Control Valves