Motion Sensors Dealers in Bhosari, Pune

Smartsaa offers hall effect proximity switches with high response speed. These switches are used for sensing speed of turbine, motors and high speed equipment. The hall effect sensor senses geared teeth and gives switching output. Application: speed sensing of turbine, motors, compressors and rotating equipments specification : supply : 10-30 v dc op : pnp or npn load current : 200 ma size : m 12 m 18 sensing distance : 1-2 mm object sensed : teeth of geared wheel max operating frequency : 100 k hz enclosure : ni cr plated brass, ip 67 operating temp : 70 degree cent

Common Utility Area: Parking, Basements, Staircases, Lobbies, Pathways, Gymnasium, Canteen, Storage area Personal Utility: Bathrooms, Wash Basins, Elderly help Home Automation Office Interior: Common Working Space, Conference Rooms, Meeting Rooms, Cabins, Server Room, Data-centers, Reception Area Industrial Applications: Warehousing & Safety Applications Retail spaces: Changing Rooms, Waiting Rooms, Warehouse Outdoor Lighting Management Outdoor Security Solutions SolarWind based application: The Sensors will reduce the energy consumption requirement, thus reducing the overall system costBattery Operated Applications Health care centers: Consulting Rooms, Toilets, Storage, Utility Area

A NEGAVEEZ PIR Occupancy Sensor offers security and convenience in the areas that they cover. Occupancy sensor is an intelligent device which detects IR Rays emitted by Human Being and controls the ON-OFF operation of electrical loads. Electrical Loads can be Lights, Fans, AC for Energy Saving Application or Siren, Buzzer, Feedback to Home Automation Controller along with Lights for Security Application. This highly sensitive Sensor Element detects human movement within its detection area and automatically turns the load ON. The Loads are kept ON till the Human Movement persists in the room. The Loads are turned OFF after preset time delay if no movement is detected within the set time It has an additional in built photo sensor (dusk to dawn sensor) which can set the sensor to turn ON artificial light only when the ambient light condition (LUX Level) drops below the set value. This reduces the large amount of energy wastage and helps in making the most energy efficient system along with security.   Operating voltage range: 140V AC to 270V AC Overvoltage/Under voltage protection DC 12 V/24 V versions are also available*** PIR Sensor: Highly Sensitive Quad Element Pyro Electric Sensor TIME Setting: Built in Re-triggerable Timer setting between 30 sec to 30 minutes from the last movement detection LUX setting: Additional Photo Sensor (Ambient Light Sensor) to select the control of electrical loads during DAY Light, PARTIAL Light and NIGHT condition. Current capacity: 5A/ 1000 W- Resistive load, 200 W of Fluorescent Tubes/LED Light load, For AC Control Use Additional Contactor of Suitable Rating Sensor warm-up time: 1 Minute Sensing angle: 360 degrees Sensing distance: 4-5 Meters Operating Temperature: -10oC to 50oC Protection class: IP25 Enclosure is protected from environmental conditions that are water and dust. EMI protection: Protection against electromagnetic interference noise caused by cell phones, TV, tuners, audio players. Over Current & Short Circuit Protection by an external replaceable fuse In built Protection circuit for lighting loads Provision for Dry Contact Output Terminal available RELAY- NO/NC/COMMON Contact available outside***

• Brand Name: Protocontrol

The centrifuges are rotating at high speeds. To avoid the danger due to untimely opening of the centrifuge door, zero speed detectors is used as a preventive/safety device. when the centrifuge is rotating, solenoid is activated and the door remains closed even though someone tries to open it .the solenoid is de-activated when the centrifuge speed approaches to zero. I.e. Only when the centrifuge stops rotating. inductive proximity switch is used as a sensor and is placed in close proximity of the rotating object. On this object, metallic plates are fixed. Proximity sensor detect presence of metal objects which come within the range of their oscillating field giving rise to corresponding pulses. These pulses are fed to the control unit where they are compared with the standard pulses to sense the speed. Output is in the form of relay contact. special sensor as well as control is available for use in hazardous area. The enclosures and enclosures are certified by competent authority for use in gas group: iia, iib as well as iic

• Material: Metal
• Application: Automotive
• Color: Black, White
• Thickness: 19.8mm
• Shape: Round

• Detection Angle: 180 Degree
• Detection Distance: 6 meter
• Power Source: 220-240 V AC
• Application: Cabinets and Closets
• Ambient Light: < 3- 2000 LUX
• Time Delay: 30 Min
• Rated Load: 300-500 W

• Type: Pir Sensor
• Application: Automobile Use, Industrial Use
• Color: Black, Blue, Red, White
• Condition: New, Used
• Application: Security
• Power: 15w, 20w, 25w
• Warranty: 1year, 2years
• Alarm Range: 1.5mtr, 1mtr, 2.5mtr, 2mtr

Speed Sensors, Automotive Sensors, Sensors, proximity, Pressure Sensors

wireless motion detectors, Access Control Reader, attendance recorder

wireless motion detectors, Access Control Reader, attendance recorder