Motion Sensors Dealers in Pune

• Features: Rugged design, excellent detection capability and reliability

• Type: Speed Sensor
• Application: Speed Reading
• Color: Blue
• Condition: New
• Warranty: 1year

based on a range of high accuracy gps engines, vbox speed sensors offer the ultimate non-contact measurement solution. with 5 hz, 10 hz, 20 hz and 100 hz gps update rate options available, the speed sensor range suits a variety of budgets and requirements. the 10 hz, 20 hz and 100 hz gps units are also compatible with the dgps base station for increased positional accuracy. the 100 hz speed sensor and the base station track the russian glonass range of navigation satellites as well as the normal gps constellation, using almost twice as many measurements for accurate results and reception in areas of poor satellite visibility. vbox speed sensors are perfect for automotive testing, motorsport, marine, telematics, and data logging applications. the ip66 rating means that each unit is water and dustproof, allowing them to be used in a variety of conditions. data output is via can bus, offering easy integration with data loggers and testing applications. each speed sensor also features analogue and digital outputs. the analogue output can be assigned to vehicle speed, lateral acceleration, longitudinal acceleration, or lap beacon marker with user selectable scaling. the digital output can be configured as either a digital speed pulse output or a lap beacon marker.   features  high performance gps receiver (5 hz – 20 hz), gps/glonass receiver (100 hz)  can bus output of position, velocity, distance, time, heading, height, vertical velocity, longitudinal and lateral acceleration, trigger to zero distance, trigger time, trigger speed, radius of turn  rs232 serial output of nmea*, position velocity and time  user configurable analogue + digital outputs  virtual lap beacon output  compatible with dgps basestation*  rugged deutsch asdd autosport connector  high quality aluminium enclosure  ip66 rated: water + dustproof  wide 6.5 v – 30 v operating range and low current consumption  

Flow sensor with integrated microcontroller transducer for the measurement of air-flow velocity and for the determination of the flow rate and flow volume. Flow sensor with integrated microcontroller transducer for the measurement of air-flow velocity and for the determination of the flow rate and flow volume. The aerodynamically styled chamber head of the sensor provides optimized flow properties in respect of an extremely small flow resistance. This ensures that even an unclean mounting of the sensor (slight twisting, relative to the axis of flow, or tilting toward the sensor axis) will not have the slightest effect on the measurement result.

PIR Motion Sensor (Model : SM02)  are energy saving devices used for home energy saving and industrial energy saving. This infrared motion sensor switch detects movement like human movement, opening of a door, movement of a car in a car parking area and keeps the lights, fans etc ON. IT turns OFF the appliances when its detection area is vacant, saving a considerable amount of energy.Features Very attractive shape & compact size, White ABS plastic body, Good quality sensor element (dual sensor element) Top quality Fresnel lens, Semi conductor re-settable fuse, Short circuit and supply surge protection, Zero cross switching, Ceiling / wall mounting option - Can be erected on ceiling or wall, Detection range : 360degree x 8 mtrs ON time adjustable from 70 seconds to 20 min, Lux level adjustable from day mode to night mode - The unit can be set to work at a desired lux level. Detection area adjustable from low to high 24 months warrenty. Specifications Supply voltage : 230 volts +/- 10%age Safe Load : 500watts Detectable motion speed : 0.5 to 1.5 mtr/sec

• Application: Energy Saving
• Brand: ECO-Energy
• Detection Angle: 360 Degree
• Detection Distance: 20 meter
• Power Source: 220-240 V AC
• HF System: 5.8GHz CW Radar ISM Band
• Transmission Power: < 0.2 mW
• Ambient Light: < 3- 2000 LUX
• Time Delay: 10 Seconds- 7 Minutes
• Mounting Height: 1.5-4 m
• Working Temperature: -20 to +40 Deg C
• Rated Load: 1200 W
• Motion Detection Speed: 0.6- 1.5 m/s

• Voltage: 220-240v/ac
• Rated Load: Max 1200 w, 300 w
• Detection Range: 360 Degree
• Power Frequency: 50/60 hz
• Detection Distance: 6m max (<24 Degree c)
• Time Delay: Min 10 sec +- 3 sec, max 7 min +-2 min
• Ambient Light: <3-2000 Lux (adjustable)
• Installation Height: 2,2-4 m
• Detection Motion Speed: 0.6-1.5 M/s

Baumer inclination sensors play a significant role in increasing safety, for example, for cranes. Their robust, IP 67 protected die-cast or stainless steel housings, make them especially suited for use in harsh environments.

• Material: Metal
• Application: Automotive
• Color: Black, White
• Thickness: 19.8mm
• Shape: Round

• Features: Excellent Motion Control, Supports DVP-S series left-side and right-side modules
• Application: Industrial
• High-speed Pulse Output: 4 Sets of 200 Khz Pulse Output
• Supports max.: 4 hardware 200 kHz high-speed counters
• Provides up to: 16 external interrupt pointers
• Benefits: Complete Program Protection

Smartsaa offers hall effect proximity switches with high response speed. These switches are used for sensing speed of turbine, motors and high speed equipment. The hall effect sensor senses geared teeth and gives switching output. Application: speed sensing of turbine, motors, compressors and rotating equipments specification : supply : 10-30 v dc op : pnp or npn load current : 200 ma size : m 12 m 18 sensing distance : 1-2 mm object sensed : teeth of geared wheel max operating frequency : 100 k hz enclosure : ni cr plated brass, ip 67 operating temp : 70 degree cent

• Type: Sensor
• Model Number: Dht11 Sensor Module
• Input Voltage: 220v
• Color: White
• Input Phase: Three Phase

A NEGAVEEZ PIR Motion Detector offers security and convenience in the areas that they cover. Motion detector is an intelligent device which detects IR Rays emitted by Human Body and controls the ON-OFF operation of electrical loads. The Electrical Loads can be Lights, Fans, Air Conditioning Units for Energy Saving Application or Siren, Buzzer along with Lights for Security Application. When it detects human movement within its detection area, it automatically turns ON the load. The Loads Continue to be ON till the time Human Movement is detected. The Loads are turned OFF after preset time delay if no movement is detected within the set time. It has an additional in built photo sensor (dusk to dawn sensor) which can set the sensor to turn ON artificial light only when the ambient light condition (LUX Level) drops below the set value. This reduces the large amount of energy wastage and helps in making the most energy efficient lightings along with security.     Operating voltage range: 140V AC to 270V AC Overvoltage/Under voltage protection. DC 12 V/24 V versions are also available*** PIR Sensor: Dual Element Pyro Electric Sensor Time setting: 30 sec to 6min to turn OFF loads after the last detected motion LUX setting: Additional Photo Sensor (Ambient Light Sensor) to select the control on electrical loads during DAY Light, PARTIAL Light and NIGHT condition. Current capacity: 5A/ 1000 W- Resistive load, 200 W of Fluorescent Tubes/LED Light load. For AC Control Use Additional Contactor of Suitable Rating. Mounting Height: 1.5 Meters to 2.5 Meters Sensor warm-up time: Less than 1 Min Operating Temperature : -10oC to 50oC Protection class: IP45 Enclosure is protected from environmental conditions of water and dust ingression. Miniature Size which can be work unnoticed to gel with the aesthetic beauty of the space Protection Against Over Voltage & Under Voltage Conditions Water Ingress Protection

• Rated Load: 1200W (incandescent lamp) 300W (energy-saving lamp)
• Installing Height: 2.2m
• Power Sourcing: 220V/AC-240V/AC
• Detection Range: 180°
• Power Frequency: 50Hz
• Working Temp.: -20 degree to +40 degree C
• Working Humidity: <93%RH
• Power Consumption: 0.45W (work), 0.1W (static)
• Item Code: SS180

Our passive Infrared Sensor is Very Popular for Its Customer Specific and Premium Quality Standard. We Collect Our Passive Infrared Sensor from Market Leading Brands. We Supply the Product all Over India to Cater the Needs of Our Customers. Our Passive Infrared Sensor is Available At An Affordable Market Price. the Product is Used for Measuring Infrared Light that Radiates from Objects in Its Field of View.

Motion Sensor used for special for security purpose. Category: Security Systems

• Country of Origin: Made in India
• Brand: Gaurav Engineers
• Sensing Angel: 120 Degree
• Voltage: 230 V AC
• Sensing Range: 35 Feet
• Frequency: 50 Hz
• Packaging Type: Box

• Features: Microcontroller based design, Power on delay Enable/Disable to avoid self alarm, Automatic temperature compensation, Programmable sensitivity, Wall / Ceiling mount
• Power Source: 220-240 V AC
• Application: Energy Saving
• Brand Name: Reality Automation
• Voltage: 240 V
• Frequency: 50-60 Hz
• Detection Angle: 180 Degree
• Detection Distance: 4 meter

• Type: Uv Sensor
• Material: Plastic
• Application: Automobile Use, Industrial Use
• Color: Black, Blue, Red, White
• Condition: New, Used
• Power: 15w, 20w, 25w
• Warranty: 1year, 2years
• Alarm Range: 1.5mtr, 1mtr, 2.5mtr, 2mtr
• Max Temperature: 80 Degree C
• Lamp power: 4 watts

• Brand Name: Protocontrol

The centrifuges are rotating at high speeds. To avoid the danger due to untimely opening of the centrifuge door, zero speed detectors is used as a preventive/safety device. when the centrifuge is rotating, solenoid is activated and the door remains closed even though someone tries to open it .the solenoid is de-activated when the centrifuge speed approaches to zero. I.e. Only when the centrifuge stops rotating. inductive proximity switch is used as a sensor and is placed in close proximity of the rotating object. On this object, metallic plates are fixed. Proximity sensor detect presence of metal objects which come within the range of their oscillating field giving rise to corresponding pulses. These pulses are fed to the control unit where they are compared with the standard pulses to sense the speed. Output is in the form of relay contact. special sensor as well as control is available for use in hazardous area. The enclosures and enclosures are certified by competent authority for use in gas group: iia, iib as well as iic

• Light level threshold: 10 to 1275 lux
• Standby consumption: 0.75 W
• Optimum distance between 2 sensors: 6 m
• Adjustable time delay: 10 s to 10 min
• Recommended fixing height: 2.5 m

The Outdoor Motion Sensor, supplied by us, is weatherproof and has a wireless range of 200m. Only quality packaging material has been used for the packing of the products that we offer. Moreover, the entire packaging procedure is conducted under the supervision of the experts. Clients can rely on us for payment related procedure as we have adopted both online and offline modes for making safe and secure transactions.

• Detection Angle: 180 Degree
• Detection Distance: 6 meter
• Power Source: 220-240 V AC
• Application: Cabinets and Closets
• Ambient Light: < 3- 2000 LUX
• Time Delay: 30 Min
• Rated Load: 300-500 W

Visonic Pet Immune Wireless Motion Detector Next K9-85 MCW Battery operated. Detects motion for up to 15 mtrs and 90 degree angle. Completely detects motion in a room which is 15 mtr by 15 mtr. Battery operated with average battery life of over 1 year   Visonic Pet Immune Wireless Motion Detector Next K9-85 MCW Next+ K9-85 MCW is a PowerCode wireless digital PIR detector designed to enable homeowners to secure their homes while allowing their pets to move freely anywhere in the house. PIR has an unprecedented capacity to reliably distinguish between human bodies and pets weighing up to 38 kg (85lb). Next+ K9-85 MCW is a fully supervised wireless detector with anti-collision PowerCode technology. It is compatible with PowerMax and all Visonic PowerCode; wireless panels and receivers. It is also called “True Motion Recognition”. 10-15m (40 ft) 90o multiple-curtain coverage with creep zone. 3 Volt long life high power standard Lithium battery. Fast and easy adjustment-free installation. Attractive sleek design suitable for any home or office environment. Compatible with PowerMax™ and all Visonic PowerCode™ wireless panels and receivers Available only in 433.9 MHz. Note: Installation Charges apply. This is not a standalone burglar Alarm. It requires one of the following panels to work together:

• Color: White
• Voltage: 240 V
• Features: Microcontroller based design , Power on delay Enable/Disable to avoid self alarm , Automatic temperature compensation , Programmable sensitivity , Wall / Ceiling mount , Relay output NO/NC Selectable
• Power Supply: 9-16V DC
• Output Alarm Period: Fixed 6 Sec
• Detection Angle: 88 °
• Detection Range: 23 mtrs
• Detection Motion Speed: 0.5 - 1.5m/s
• Humidity: 95 % RH
• Item Code:: PIR-723P
• Frequency: 50-60 Hz
• Brand Name: Reality Automation

• Voltage: 220-240V/AC 50/601/n
• Features: Equipped with integral relay , Compact size ,Electric operated ,Simple design, Durable, Longer serviceability.
• Rated Load: 500W

• Type: Automatic Motion Sensor
• Certification: CE Certified, ISO 9001:2008 Certified
• Application: Energy Saving, Corridor, etc
• Voltage: AC 220-250 V
• Frequency: 50HZ
• Load power: Up to 300-1200 W
• Power Consumption: 0.1W (static) & 0.4(Work)
• Detecting distance: 10 to 12 m