Namonkar Electricals Pvt. Ltd. Wadki, Pune, Maharashtra

TTS 300 is a T terminal shroud. It serves as an Insulating barrier between two live areas. Its unique design enables it to be installed on extensible bushings of all types   Application The T Terminal Shroud TTS 300 provides insulation to live parts & enables insulated interconnection of Ring main Units through top extensible bushings.

Brand Name : Namonkar

Material : Rubber

Color : Black

TS300 is a terminal shroud. It serves as an Insulating barrier between two live areas. Its unique design enables it to be installed with any type Indoor termination – Heat Shrink, Cold Shrink or Push-on .   Application The Terminal Shroud provides insulation to live parts & enables indoor terminations to be installed in equipments having small clearances which are not suitable for air clearance like Ring main Units & transformers.

Brand Name : Namonkar

Material : Rubber

Color : Grey

ST 300 is a straight shroud. It is made of specially formulated Silicone Rubber. It serves as an Insulating barrier between two live areas. Its unique design enables it to be installed as a straight shroud or a right-angle shroud thus providing flexibility in installation.   Application ST 300 provides insulation to live parts. It is great to provide insulation to live parts of distribution transformers and pole mounted transformers. It is suitable for installation in very humid and polluted environments

Size : One Size Fits All

Material : Silicone Rubber

Application : Industrial

Feature : Durable, Rust Proof

Namonkar SCW is a self-closing braided sleeve. It provides a lightweight cost effective & tough solution for protection of a wide range of components. Its inherent flexibility allows it to bend, coil & conform to irregular shapes, while its open design allows it to be installed on complete assemblies easily.   Application Most commonly used over wire harnesses, cable assemblies, flat ribbon cables, tubes and hoses to provide a tough, durable protection in automotive, automatic equipment railways and panel boards.

Material : Rubber

Application : Wire Harnessing Use

Color : Black

Pattern : Braided

Brand Name : Namonkar

It is a self bonding rubber tape. It is used for electrical insulation of irregular surfaces and cable joints.   Application It is used for installation of cable joint and terminations as well as providing insulation to uneven surfaces in electrical switchgear/transformers. Both conducting and insulating types are available.

Adhesive Side : Single Sided

Design Printing : Plain

Brand Name : Namonkar

Color : Silver

We offer a complete range of Touch Proof Screened Connector upto 42.5 KV. We offer solutions for inner cone as well as outer cone applications and even T bolted type or Elbow plug in type & straight plug in type. These are fully type tested as per IEC 502 and approved by all major RMU manufactures. We also offer solutions for Double connections. We also offer heat shrink and cold shrink terminations and joints.   Application These are used for terminating high voltage cables in main units (RMU), Transformers, GIS insulated switchgear which have very less air clearance. These have semi conductive surface and when the outer surface is connected to ground it is at zero potential on the surface of the termination. It also provides human safety as accidental contact does not lead to short circuit or shock to human life.

Color : Black

Insulation Material : Plastic

Power Source : Electric

Namonkar SPT is a Heat shrinkable printable sleeve. It is especially designed to have ultra clean & flat surface to ensure excellent printing & readability. These meet the `MIL` `standard and are halogen free. Application They are extensively used in panels and switchgears installed in closed atmosphere. These meet the industry standard in Europe & America and are now gaining a lot of acceptance in Asia.

Thickness : 3-5mm

Application : Electrical Winding

Feature : Optimum Strength, Smooth Texture

Brand Name : Namonkar

Namonkar NBIT is made from radiation crosslinked polyolefin. The dual layer structure of insulation/hot melt adhesive makes the tape effective to provide electric insulation and shock protection for busbar up to 36KV.   Application It is widely used to protect complex busbar connection where tube products cannot be applied.

Color : Multicolor

Brand Name : Namonkar

Namonkar NELC is a overhead line cover. It provides insulation and protection for overhead lines.   Application It prevents short circuit accidents caused by incidental contact of tree branches or wildlife. It is also used for railway contact network. Overhead line system improves insulation performance to ensure the safe operation of railway line.

Material : Silicone Rubber

Application : Insulation Protection

Feature : Durable, Heat Resistance

Namonkar HST is a heat shrinkable sleeve with various shrink ratios (2:1; 3:1; 4:1) and suitable for various temp. applications (125, 135, 150, 175, 200, 250). It is UL and ROHS certified. It is flame retardant and halogen free.   Application These sleeves are widely used for insulation and protection of wire bundles, hoses, busbars etc.

Material : Polypropylene

Brand Name : Namonkar

Namonkar NBT is a medium/heavy wall heat shrinkable tubing. It is made from specially formulated radiation cross-linked halogen free compounds.   Application It can provide high resistance to tracking and arcing. Used to enhance the insulation properties of bus-bar in switch and substation to adapt to application in insulating medium/high voltage bus bars up to 1.1 KV, 11 KV, 24 KV, 36 KV.

Brand Name : Namonkar

Namonkar HFT tubing is made of very flexible heat-shrinkable fabric material. They shrink and fit snugly and securely around the underlying substrate.   Application Designed primarily to provide mechanical abrasion protection for components such as rubber hoses, plastic pipes, and harness wiring bundles, they are also suitable for other applications, such as noise and rattle suppression

Material : Polyolefin + Polyester

Brand Name : Namonkar

Namonkar Flexcon is a braided sleeve for abrasion resistance and bundling applications. It comes for various temp. Applications (125, 150, 200). Its open weave construction allows an easy installation on a bundle of hoses & cables even if there are some bulky or large connectors. It is available in various formats (self-closing, with Velcro, zipper etc).   Application They are used for organizing wires and cables as well as protection from abrasion and high temperature. They enable safe and organised branching so that wire routing can be done in a safe and systematic manner.

Application : Cable Protection

Color : Black

Packaging Type : Plastic Packets

Namonkar SFS/AFS is a heat-treated fiberglass sleeving coated with special kind of resins and offers outstanding temperature withstand capabilities of 200oC/1500C. It has excellent properties of self-extinguishing & flexibility. It is available in various voltages (1.2, 1.5, 3, 5, 7, etc) it is extensively used for protection of wire bundles from High temperature   Application Specially coated fiberglass sleeves are used for organizing wires in different temperature zones. The type of coating decides temperature zone in which the wire bundle protected by the coated fiberglass sleeve can be used. They provide solutions for all temperature zones from 100 degree C to 1000 degree C. They also enable wire bundles to become fire survivor for four hours.

Material : Fiber

Shape : Round

Thickness : Standard

Color : White

Pattern : Plain

Brand Name : Namonkar

Namonkar CT is a corrugated tube for bundling and protection application. It is available for continuous operating temp of 105,125, 150 deg C. and is available in slit or unslit format. The identification line can be of any colour as per the customer request.   Application It is widely used for protecting wires and cable harnesses in automotive, equipment, railways etc. It can also be used for protecting the hydraulic hoses.

Size : Standard

Shape : Round

Color : Black

Feature : Fine Finishing, High Strength, Perfect Shape

A cable tie is a type of fastener, for holding items together, primarily electrical cables or wires. Because of their low cost and ease of use, cable ties are ubiquitous, finding use in a wide range of other applications. Some other variety are push mount cable ties, Arrow head cable ties and fir type cable ties.   Application They find their application in the field of automotive, automation, electrical, defense, railways, aerospace etc.

Material : PVC

Thickness : 1.5-2mm

Application : Tie Electrical Cables

Color : Black, White

Feature : Best Quality, Durable

Namonkar NBWS is a button wrap that can tidy up and beautify the wiring fast and easily. It is reusable and has excellent performance of insulation and abrasion resistance.   Application It’s great for harness work and allows breakouts of single or multiple wires for re-routing or replacement. It is widely used for bundling and protecting and wires harness and cables on panel board, computer cables, TV, equipment and so on.

Material : Rubber

Color : Black

Feature : Durable, High Ductility

Pattern : Plain

Brand Name : Namonkar

Namonkar AHRFS is a heat reflection and thermal protection product. It is available in various formats like sleeve, self-closing, corrugated etc. It is used extensively in the automotive field in the engine area to protect the substrate from heat.   Application Namonkar AHRFS offers perfect protection for industrial wire, cable, hose, pipes, tubing and equipment that is close to intense radiant sources such as super hot metal slabs, liquid or molten metals or glass, open flame or engine, exhaust mainfolds.

Material : Aluminium

Shape : Round

Thickness : 20-40 Mm

Color : Silver

Packaging Type : Corrugated Boxes

Namonkar AHST is an adhesive lined Heat shrink tube. It is available in shrink ratios of 2:1, 3:1 and 4:1. It is flame retardant. It is UL and ROHS certified.   Application It is used for environmental sealing, mechanical and electrical insulation. They are extensively used in various applications where there are closed environments like automotive, automation, defense, aerospace etc.

Brand Name : Namonkar