Networking Devices and Equipment Dealers in Baner, Pune

• Supply Voltage: 24V DC ( Range : 9 to 36V )
• Brand: San Telequip
• Sensitivity: < -110 dBm
• Output power: < 35 dBm
• Mounting Type: DIN rail
• Model Name/Number: GSX1-232/485
• 2G Modem Data rate: Max. 85.6kbps

• Application: Network Connecting
• Certification: CE Certified
• Color: Grey, White, Black
• Voltage: 110V, 220V
• Condition: New
• Power: 1-3kw, 3-6kw
• Power Source: Electric
• Warranty: 1year, 6 Months
• 1year,2years,5years: Automatic

We are the main supplier of this product.

Desktops - Versatile and powerful computers suitable for a wide range of tasks    

Features: Designed for high nines availability: Break- before- make switching eliminates any possibility of connecting the two independent power sources together,even under fault conditions. Diagnostics and transfer tests detect any potential switch failures before the problem becomes critical. Rapid operation: Network power switch transfer time of six milliseconds is invisible to sensitive electronic equipment.(as per IEEE standard 446 susceptibility curve for it component) Automatic transfer protects the critical load as soon as a problem is detected on the power source by switching to the alternative supply. Manual transfer allows power sources to be switched whenever required for scheduled source shutdowns or maintenance.

• Brand Name: Span
• Channel: 8
• Operating Humidity: 20 to 95 % RH
• Model Name/Number: ADAM-6017
• Input Impedance: Greater than 10 M Ohm
• Accuracy: +/- 0.1%
• Resolution: 16-bit
• LAN: 10 / 100 Base
• Power Consumption: 2.5 at 24 V DC
• Watchdog: 1.6 sec
• Power Input: 10 to 30 V DC
• Operating Temperature: -10 to 70 deg C
• Storage Temperature: -20 to 80 deg C
• Storage Humidity: 0 to 95 % RH

Features DIN Rail or Panel Mounted compact Protocol Converter DB9 Serial ports in any combination of RS232 / RS422 / 2 or 4 wire RS485 / CMOS Connects PLC to PLC or PLC to a Modbus Network (as a Master or Slave) Allows data sharing between PLC, Invertors, Controllers and other network devices Common model for connecting different devices. Several PLC and Invertors supported Direct connection to the Programming terminal saves additional hardware Low power consumption of only 2.5 Watts Common Programming software for the entire Gateway family.........FREE!! CE with UL certification

• Brand Name: Ubiquiti Networks
• Model Number: PBE-M5-400 US X 2
• Item Weight: 4.54 g
• Package Dimensions: 50.8 x 45.7 x 25.4 cm
• Item model number: PBE-M5-400 US X 2
• Colour Screen: No
• Batteries Included: No
• Batteries Required: No
• Includes Rechargable Battery: No
• Includes Remote: No

• Type: Usb Switch
• Application: Industrial
• Color: White
• Feature: Easy Install, Long Life
• Condition: New
• Packaging Type: Box, Carton

• Input voltage: 230VAC, 50Hz
• Resolution: 0.1 A
• Dimensions: 165 (W) X 60 (L) X 115 (H).

The Industrial RO control panel provides for very convenient mounting and easy field cable terminations. Removable terminals blocks are provided for easy terminations. Different sizes of terminals are selected for process and power connections to avoid wrong connections. The industrial RO control panel is based on state of the art technology processor. It has 6 digital inputs and four outputs. It also has Conductivity and Flow (pulse type) Sensor inputs. It can be set for Manual pre-treatment operation or Automatic pre-treatment operation. On powering the controller it checks for Raw Water Tank (RWT) level and the Treated Water Tank (TWT) level. On receiving signals that the RWT is not empty and TWT is not full, it starts up the Raw water Pump (RWP). A Low Pressure Switch (LPS) check the pressure developed at the suction of HPP. On receiving the signal that pressure is developed (LPS) at the suction of High Pressure Pump (HPP), it opens the Flush (reject) Solenoid valve for a settable time, ensuring slow flush. After this, the HPP is started for a settable time ensuring fast flush. At the end of this time Flush Solenoid valve is closed and RO is startedoperational. The controller continuously checks the pressure (LPS) at the HPP suction. Should it fall, a message is displayed with an LED indication on the front panel.

Visonic internal GSM module supports normal GSM SIM card. You can receive calls and SMS for all the alerts and alarms on up to 8 different number. Send simple SMS commands to the panel to Arm, Disarm and to know the current status of the panel. Fits inside the control panel therefore no chance of cutting of wires to disable it.     Visonic Internal GSM Module Supports three data channels – GPRS*, GSM and SMS – for high-speed and highly-reliable reporting. Can be configured as a backup or primary reporting method. Full event reporting. Recommended for every home as a backup communication line in case of line failure or system sabotage. Supports remote programming of the security system via the IPMP Management Platform or via dial-up over the GSM data channel. Continuous monitoring of channel integrity and “signal loss” detection. Supports SIA/IP, SIA and Contact ID monitoring protocols. Support two-way voice communication. Optional external antenna is available to enhance the GSM signal reception. Works with PowerMaxPro, PowerMaxComplete and PowerMaxExpress GPRS-enabled control panels. GSM 350/4 (900/1800MHz) Available only in 433.9 MHz. Note: Installation Charges apply. This is not a standalone burglar Alarm. It requires one of the following panels to work together:

Web Services, IOS DEVELOPMENT, Web Application Development, cloud computing

wireless equipment

Serial Communication Converter, Signal Isolator, usb converter