Back Back
Working Model of Starter Assembly
The system is designed using manufacturer’s original components. All the working components are mounted on a panel. Each of the components have nomenclature. When connected to a battery/ electrical supply (supplied as optional additional item), the system operates. This gives hands-on experience to the students.Optionally a fault simulator is supplied to simulate fault. This sharpens the skill of the trainees on fault finding.
...more
wiper motor assembly
The system is designed using manufacturer’s original components. All the working components are mounted on a panel. Each of the components have nomenclature. When connected to a battery/ electrical supply (supplied as optional additional item), the system operates. This gives hands-on experience to the students.Optionally a fault simulator is supplied to simulate fault. This sharpens the skill of the trainees on fault finding.
...more
Two Stage Air Compressor Test Rig
This is an invaluable aid in the effective understanding of the performance characteristics of reciprocating type air compressor. The compressor may be run using an AC or a DC motor. Various parameters like pressure, suction air flow, compressor speed, power input, etc., are measured. Compressor of single cylinder, two cylinder single stage and two cylinder two stage types can be studied. Optionally, it has a facility to vary the speed of the motor to get various performance parameters for better understanding.
...more
Transparent Pneumatic Trainer
This trainer explains the essential physical principles of pneumatics. It demonstrates the construction and working of basic pneumatics with the help of transparent components and helps the students in the designing and building of basic pneumatic circuits. The pneumatic components have transparent bodies. This enables the user to view the construction of the valve as well as the flow path of the air. Thus this becomes an excellent tool in understanding pneumatic components and enhances the troubleshooting capability of trainees. Various circuits can be developed and operated using these transparent components and Quick Release Couplings.
...more
Single Stage Air Compressor Test Rig
This is an invaluable aid in the effective understanding of the performance characteristics of reciprocating type air compressor. The compressor may be run using an AC or a DC motor. Various parameters like pressure, suction air flow, compressor speed, power input, etc., are measured. Compressor of single cylinder, two cylinder single stage and two cylinder two stage types can be studied. Optionally, it has a facility to vary the speed of the motor to get various performance parameters for better understanding.
...more
Screw Compressor Test Rig
This is an invaluable aid in the effective understanding of the performance characteristics of a centrifugal air compressor. The compressor is run using an AC motor. The system has indicators for pressure, temperature and airflow rate. Optionally, it has a facility to vary the speed of the motor to get various performance parameters for better understanding.
...more
Hydraulic Trainer Kit
This trainer is designed for students to get familiarize with real life to factory automation system. Material handling is understood. The system consists of Electro Mechanical system. Various electro-pneumatic components are controlled by a PLC. Two different processing are simulated on this station. Trainers manually feed disc on a rotary indexing station. Optionally, a simulation of drilling operation is carried out.
...more
pneumatic trainer
This trainer explains essential physical principles of pneumatics apart from describing the basic components along with their constructions and functions. It can be upgraded to learn advanced theories and comparatively complicated circuits. It helps students in the designing and building of various pneumatic circuits. The trainer is available as a compact table top unit. Alternately it can be supplied as a trolley mounted on wheels for convenient handling. Various models are available to suit the varied requirements of different institutes. Basic, Advanced, Electro-Pneumatic, PLC operated and PC operated trainers are available. Electro-Pneumatics is widely used in all industries for a variety of applications. The combination of electrical controls and pneumatics is very effective in automation. These circuits can also be studied on select models of the trainer. All the models can be supplied with profile plate and sliding arrangement for in-use component mounting and component storage facility. The advantage of this system is that it is space saving and the user can add more components as and when required.
...more
Multi Process Control Trainer
A low cost pilot plant, available in various models, the multi-process control trainer is designed to familiarise students with the control of various parameters like flow, level, temperature and pressure. Various control schemes such as feed back, feed forward cascade, ratio, and batch are demonstrated on a single system. This system is PC interfaced. Optionally, an additional discrete PID controller can also be supplied.
...more
Jet Pump Test Rig
This is an invaluable aid in the effective understanding of the performance characteristics of a Jet pump. The electric motor (AC or DC) is used as a drive unit. The unit has a facility to measure the power consumed by the drive, pump speed, flow rate and pressure. Optionally, it has a facility to vary the speed of the motor to get various performance parameters for better understanding.
...more
Impact of Jets
This is stand-alone, re-circulating type equipment. This equipment helps in study of effects occurring due to force exerted by a fluid jet on vanes of various shapes and hence evaluates the hydrodynamic force exerted.
...more
Hydrostatic Bench
This Hydrostatics Bench is a self contained and mobile bench equipped with the apparatus needed for a comprehensive range of experiments on properties of fluids and hydrostatics. The equipment allows the study of all the important properties of Newtonian fluids.With this equipment students can develop their knowledge of a wide range of principles and techniques that will be of lasting value to them in their studies of fluid mechanics. The equipment is entirely self-contained and mobile.
...more
hydraulic trainer
Electro-hydraulics is widely used in all industries for a variety of applications. The combination of electrical controls and hydraulics is very effective in automation.This trainer demonstrates construction and working of basic as well as advanced hydraulic components and helps the students in the designing and building of basic and advanced electro-hydraulic circuits and its control. Students can make a hydraulic circuit, write Programmable Logic Controller (PLC) software (Ladder Diagram) and check its execution. Numerous circuits can be created since QRC and flexible hoses are provided. Optionally, the PLC can be programmed through PC. Optionally, sliding arrangement for in-use component mounting can be provided along with component storage facility.
...more
Heat Exchanger Trainer
This is an invaluable aid in the effective understanding of heat exchangers. The hot water unit comprises of a tank fitted with electrical immersion heaters. It has a facility to circulate hot and cold water through flow meters with the help of motor driven pumps. Shell and tube heat exchanger and/or a concentric pipe heat exchanger and/or plate type heat exchanger is provided to conduct the experiment. Other type of heat exchangers can be provided, on request. The system facilitates the study of parallel and counter flow as well.
...more
Free And Forced Vortices
The module in conjunction with the hydraulic bench helps in study of vortex formation when a liquid is under the influence of a rotational motion. Necessary arrangement enables complete study of the profile of both free and forced vortices under changing conditions of speed and volume of liquid.
...more
Flow Measurement Trainer
This system is designed to study various types of flow sensors and transmitters. An orifice meter or a venturi meter is fitted in two parallel lines. A rotameter is provided for visual flow measurement. Tappings are taken at a fixed distances on the orifice/venturi for the differential pressure measurement on a U tube manometer. Optionally a differential pressure transmitter can be connected and the flow is digitally displayed. Different types of sensors/transmitters can be installed to suit customer requirement. Results obtained from various flow meters are compared and studied.
...more
Flow Level Control System
Flow-Level control system is designed to demonstrate various aspects of control engineering using a flow control system to control the flow and level of water delivered by a pump. Feedback, feed forward, cascade, ratio and batch process can be demonstrated. The system incorporates standard industrial components like pneumatic control valve, digital PID controller, etc.
...more
flow control system
Flow control system is designed to demonstrate various aspects of control engineering using water flow as a parameter for the feedback control system. The system incorporates standard industrial components like pneumatic control valve, digital PID controller, etc.
...more
Flexible Production System
The trainer is specially designed to teach and familiarize students with materials handling process using a PLC. Different automation and handling task modules are demonstrated such as, feeding, conveying, sorting, etc. Standard industrial components are used in the trainer. Work-pieces of aluminum, plastic black & white are fed from a storage magazine onto a conveyor belt by a cylinder. The conveyor takes the work-piece for inspection. Here material characteristics and work piece outline profile are checked using an opto-electric sensor and an ultrasonic sensor. Depending on the result of this inspection the pieces are sorted using cylinders and clutch. The entire working of the system is Electro-pneumatic and controlled by a PLC.
...more
Electro Pneumatic Trainer
This trainer explains essential physical principles of pneumatics apart from describing the basic components along with their constructions and functions. It can be upgraded to learn advanced theories and comparatively complicated circuits. It helps students in the designing and building of various pneumatic circuits. The trainer is available as a compact table top unit. Alternately it can be supplied as a trolley mounted on wheels for convenient handling. Various models are available to suit the varied requirements of different institutes. Basic, Advanced, Electro-Pneumatic, PLC operated and PC operated trainers are available. Electro-Pneumatics is widely used in all industries for a variety of applications. The combination of electrical controls and pneumatics is very effective in automation. These circuits can also be studied on select models of the trainer. All the models can be supplied with profile plate and sliding arrangement for in-use component mounting and component storage facility. The advantage of this system is that it is space saving and the user can add more components as and when required.
...more
Electro Hydraulic Trainer
Hydraulic trainer explains the essential physical principles of hydraulics. It demonstrates the construction and working of hydraulic components and helps students in the designing and building of various hydraulic circuits. The trainer is built on a compact trolley mounted on wheels for convenient handling. Various different models are available to suit varied requirements of the institutes. Basic, Advanced, Electro-Hydraulic, PLC operated and PC operated trainers are available. Electro-hydraulics is widely used in all industries for a variety of applications. The combination of electrical controls and hydraulics is very effective in automation. These circuits can also be studied on select models of the trainer. All the models can be supplied with profile plate and sliding arrangement for in-use component mounting and component storage facility. The advantage of this system is that it is space saving and the user can add more components as and when required. Computer Based Training Software (Simulation Software) On Oil Hydraulics and Pneumatics is also available as stand-alone software or a part of the equipment.
...more
Electro Hydraulic Servo Trainer
The electro-hydraulic servo trainer aims at imparting a working knowledge of basic hydraulic actuators, transducers used for the measurement of oil pressure, temperature, speed, etc., control signals and controller tuning. The system aims at studying closed loop feedback control in hydraulics for angular position, rotational velocity and linear position using an electro hydraulic servo valve. Optionally, a brake type loading arrangement is provided to vary the load on the hydraulic motor. Electro-hydraulics is widely used in all industries for a variety of applications. The combination of electrical controls and hydraulics is very effective in automation. These circuits can also be studied on select models of the trainer. All the models can be supplied with profile plate and sliding arrangement for in-use component mounting and component storage facility. The advantage of this system is that it is space saving and the user can add more components as and when required. Computer Based Training Software (Automation Studio Software) On Oil Hydraulics and Pneumatics is also available as stand-alone software or a part of the equipment.
...more
DISTRIBUTION STATION WITH SORTING
This trainer is designed for students to get familiarize with real life to factory automation system. Material handling and sorting is understood. The system consists of Electro Mechanical system. Various electro-pneumatic components are controlled by a PLC. Coloured disc are distributed for further inspection and sorting via a transport system. Colour disc are fed to conveyor through stacking magazine assembly. Depending on the colour of the disc, these are sorted in two different bins. All other discs are put in rejection bin.
...more
Desert Cooler
This is an invaluable aid in the effective understanding of the humidification and cooling process. The trainer is designed for the study of the desert cooler and its cooling process by way of demonstration and experimentation. It is designed in such a way as to highlight the specific constructional details of a desert cooler. It has a facility to measure various parameters for experimentation.
...more
Different Automobile Parts Cut Section
Reviews & Ratings
Write a ReviewBe first to Rate
Rate This
Share your Correspondence Details to receive messages from Niyo Engineers
Post Free Ad