Oil & Stain Cleaner Dealers in Bhosari, Pune

Electrostatic Oil Cleaners are used for super cleaning of oil to NAS 1638 grade level. Efficiency of this machine to super clean the oil will be in the range of NAS 6-7. These machines are available with or without dehydration attachment. They work on high voltage laminar flow principle, catchhold magneticnon-magnetic ferrousnon-ferrous material.

• Type: Multipurpose
• Form: Liquid
• Style: Spray
• Application: Industrial
• Shelf Life: 1 Year
• Purity: 100%

Your search for exceptional quality and reliable Electrostatic Hydraulic Oil Cleaner; we are a leading Supplier in this domain. We are supported by such storage facility that provides protection from diverse damaging factors such as dust, moisture, rain, sunlight, etc. Also, we maintain complete hygiene inside the unit.

It extracts coolant, chips and swarf from sumps and settling tanks: filters the coolant; returns clean coolant; all in one continuous operation - 50 gallons in ten minutes,start to finish, on sumps regularly cleaned.Under controlled conditions it can also extract from one machine and deliver to another cutting time still more. It never overflows. APPLICATION: ENGINEERING INDUSTRY Machinery and Factory Cleaning for Collection of Metal chips, C.I. Turnings, Milling/Drilling Burrs, Greasy Dirts and even small nuts and bolts

Clean Oil is necessary to get good performance from your machines/ equipments. Contaminations in oil are responsible for breakdown, losses and replacement of the oil.Conventional methods of oil purification, viz: filtration, centrifuge and straining, are incapable of adequately cleaning oil, as they remove particles only above 5 microns in size.These remaining small size particles cause high contamination and therefore require regular changing of oil.Air breathers and cylinders effectively act as gates of entry to dust particles, which being only 2 microns in size, escape conventional oil purification methods.The electrostatic cleaning presents a far superior and highly effective method of purifying hydraulic oil. Contaminants caused due to dust, abrasive metallic particles, oxidation, sludge and fine water are removed by this method. Oil cleaned by this method meets NAS class 4/5 requirements. (National Aerospace Standards 1638)The KEOC 55, KEOC 110, APO-110 machines clean oil by electrostatic process, hence presence of moisture / water content in the oil affects the conductivity of the oil. These machines can clean oil with moisture / water content upto 500 ppm.However if the moisture / water content in the oil exceeds 500 ppm then our models KEOC-110 DH & FDU 35 are useful. KEOC-110 DH can clean oil with a moisture content upto 1500 ppm.If the moisture content exceeds 1500 ppm then the moisture has to be removed by FDU-35 (Flash Distillation Unit) then sent for electrostatic cleaning through KEOC-55 / KEOC-110 SOURCES OF CONTAMINATION OF OIL The Hydraulic Oil in the system may get contaminated from any of the following sources. During manufacturing of components and assembly of systems, burr, chips, weld spatter, casting sand, particles from seals and gaskets, adhesives, paint particles etc. are left in the various components which go into the oil.Many a times oil is contaminated by the time it arrives at the user’s end.Air borne dust, dirt, rust, enter into the system and then into the oil through Air breathers, seals etc.Metal particles that are produced by abrasive wear, erosion and surface fatigue in the system itself.Contaminations due to surrounding atmosphere and leakages in the system. 

Hafi Industrial Vacuum Cleaner Model – 8000 , is designed for machinery and factory cleaning. The equipment has a suction capacity of 8000 mm Wg, and perhaps the most powerful Vacuum Cleaner now available in India. The Hafi Industrial Vacuum Cleaner use vacuum pump instead of conventional blower fans, resulting in higher suction power, leading to shorter cleaning time with better cleaning results. The powerful suction thus generated enables to pick greasy dirt, fibres, fluffs, and cotton waste. Automats are cleaned rapidly and thoroughly without blockage of the suction hose. With an air delivery at suction hose end 340 cubic mtr.hr. the equipment can be used as a blower if desired. The unit is a compact, portable, trolley mounted and can handled by a single person. APPLICATION : TEXTILE INDUSTRY Shortest Cleaning time of various Textile machinery like Weaving, spinning, carding, Ring Frame, Draw Frame, etc., for collection of dry fluff, oily and greasy fluff, dust, grease, oil etc.

• Tank Capacity: 25 Liter
• Flow Rate of Pump: 6 to 8 Lts
• Moisture Content: 550 PPM
• Viscosity of Oil: Less than 200 CST
• Max Tempeerature: 60 DegC
• Input Supply: 230 Volts A.C,50 Hz,3 Wire

These Oil Industrial Vacuum Cleaners are the right choice for cleaning machinery in mechanical workshops. The Oil Industrial Vacuum Cleaners have been designed specifically for the mechanical engineering sector and the simultaneous suction of swarf, oil and lubricants. These Oil Industrial Vacuum Cleaners are capable of separating liquids from solids using a macro filtration process that allows the reuse of oils for the machine tools involved in the production.Emptying liquids is simple, efficient and rapid thanks to its reverse flow system that takes advantage of the air produced by the turbine to discharge the sucked liquids. The Oil series is designed to reduce waste and increase resources. The benefits of using Oil Industrial Vacuum Cleaner are Reduction in cleaning and stoppage time Savings on the cost of coolant Savings on the disposal of waste

• Brand Name: Megamech
• Production Capacity: 400 Ltr
• Voltage: 240 V
• Weight: 350 kg
• Automatic Grade: Semi-Automatic
• Material: MS & SS
• Size: 66 x 34 x 55 inch
• Pump Type: Vacuum Type
• Flow Rate: 100 LPM
• Frequency: 50 Hz
• Tank Size: 27 X 54 inch
• Tank Capacity: 400 L
• Basket Capacity: 135 kg
• Suction Hose Size: 2 inch
• Discharge Hose: 1-1/2 inch

Oil cleaning machine removes suspended solid contaminants in oils. Oil cleaning machine enhances the usable life of oil & mechanical filters.   These cleaning equipment are used to improve the precision of machine components like servo valves, pumps and sliding mechanisms. 

• Phase: 2
• Operation Mode: Semi-Automatic
• Voltage (V): 380
• Frequency (Hz): 60

We are one of the quality Sump Sucker suppliers in Pune. our product has high durability, performance, and resistance to corrosion.

• Flow Rate: 500-4000 LPH
• Automatic Grade: Automatic
• Minimum Order Quantity: 1 Piece

We are offering oil cleaning systems. For critical applications of hydraulic powerpacks, minimac offers online installations which are more beneficials. Injection moulding machines, cncs, spms, heavy presses, hot presses, bailing machines, die-casting machines, testing rigs etc. Have servo valves (eg moog valves), variable pumps, hydraulic motors (eg hagglund drive) and sometimes microprocessor controlled interface devices (eg demag dfe cards) in their hydraulic circuits. For least breakdowns and better life of these machines, the oem recommendation is super-clean oil (nas 5) with zero moisture at all times. minimac online installations on powerpacks ensure an oil cleanliness value of nas 4 or better and zero moisture at all times. These installations also help to protect lubricant additives and prevent oil from degrading. This also ensures indefinite oil life. major users of minimac online installations include tata motors, mahindra, ashok leyland, videocon, moser baer, minda, nilkamal etc. Hydraulic oil online filters engine oil purifiers online oil cleaning systems

Electrostatic Hydraulic Oil Cleaner, air showers filters, Fume Hoods

transformer oil cleaning systems, Hilliard Polishing Filter Cartridge

Electrostatic Hydraulic Oil Cleaner, photo meter

Sump Sucker, Router Bit Set 1 / 4, Magentic V Block, air angle grinder

degreasing machines, Industrial Parts Cleaning machine

Oil Cleaning Systems, Oil Testing Kits, oil testing products