Oil Filter Machine Dealers in Shivane, Pune

• Voltage: 220V
• Usage: Industrial
• Series: 8810
• Liquid Suitability: Engine Oil Gearbox Oil Transmission Oil Axle Oil
• Advantage: Easy to Use
• Power supply:: 200-240v- 3 Phase

Salient features  Size of the filter media handled 1.5 m length X 0.3 m width Precise crests and trough of the densed filter mediaCutter is operational in Bekaert Advanced Filtration

hydraulic oil filtration equipment We are the leading manufacturers of high quality industrial micro filters and filtration systems in India. We believe that our expertise in this particular field should be made available to our customers in order to assist them in their quest for manufacturing excellence.

• Type: Paper, Oil filtration
• Color: White
• Shelf Life: 2years

We are engaged in the manufacturing, supplying and exporting of high quality hydraulic Oil Machine Filter Paper. These Oil Filter Papers are highly demanded in the market due to their cost effectiveness and longevity. Availability : Prefilters ;Cartridge filters feature an Acrylic Fiber-Phenolic resin Cellulose Fibers-Melamine Resin construction.Produce an extremely rigid pore structureThis construction allows the filter to withstand extreme viscosities and temperature without compression or collapse.A true graded density construction allows complete utilization of the filter's depth, with coarse particles captured in the outer zones and finer particles captured in the inner qualifying zone.Both wire mesh and paper mesh also available with various sizes as per customer requirements.Collector Paper :Cellulose filter paper (collector paper) for electrostatic oil purifier as per models and if required it can be supplied by us as per customer requirement. Features : Highly absorbentOptimum qualityAnti-tear Applications : Oil refineries (for removing impurities from oil)steel industryplasti molding

• Model: CK400
• Centrifuge model: FT400
• Flow Rate: 2800 LPH @ 6Bar Pressure
• Rotor Capacity: 6 Liters
• Pump Capacity / Flow Rate: 3000 LPH @ 6 Bar Pressure
• Dimensions with Filter FT600 Mounted: 750 mm (L) x 450 mm (B) x 1200 mm(H)
• Weight of Unit: Net Weight 126 Kgs.

OIL FILTRATION PLANTS CAN BE SUCCESSFULLY MODIFIED & AUTOMATED FOR VARIABLE FLOW RATE. A brief description is given for your reference.   INLET & OUTLET PUMPS : The pump will be driven by suitable sized AC drive to control the flow rate. By using these settings we can control the flow rate from i.e. If Plant is 6000 LPH then it will vary from 1000 LPH to 6000 LPH. HEATER TANK : It is also necessary to select proper heat output for variable flow rates. This will avoid localized heating of oil for small flow rates.This section will incorporate PLC which will control the heaters.PLC will be used for control of heater groups, once certain flow rate has been selected, heaters will be configured automatically to suit that flow rate. This control panel will be designed for reliable & trouble free operation.By using the above system the major benefit is to have a single machine instead of different models for different capacities. In this case, flow rate can be kept variable from 1000 LPH to 6000 LPH. Power saving of 30% can be achievable by using this system as compared with traditional oil filter system designs.   OPERATIONAL & PROCESS AUTOMATION Press 'START' to start the oil filtration process. All airing valves, oil inlet & outlet valve will close. The rotary vacuum pump will start to achieve coarse vacuum. After achieving coarse vacuum level, which the 'Vacuum Switch' will sense. After achieve the desired level of fine vacuum in the plant, oil inlet valve & intermediate valve will open and the oil inflow will start due to vacuum inside the plant. The flow switch provided in the suction line of the plant will sense the oil flow & that signal will start the oil inlet pump. In case, the incoming oil flow is not there, HMI on the control panel will display 'LOSS OF OIL', with annunciation. One pressure release valve, provided across the inlet pump will control the excessive pressure rise in the plant. As oil is filled in the degassing chamber, the high level float switch will operate & that will put 'OFF' the inlet pump & start the outlet pump. The starting signal to the outlet pump will open the outlet valve. As the oil level in the degassing chamber comes down, the high level float switch will start the inlet pump, again. Thus the oil circulation through the filtration plant will start. After the continuous oil flow through the plant, the heaters will be 'ON'. Temperature of oil will be controlled by TIC (Temperature Indicating Controller) & one safety thermostat will control the accidental temperature rise. Thus the hot oil circulation through filters & degassing chamber will start resulting in the effective separation of solid impurities as well as dissolved moisture & gases from the oil. During the filtration process, the necessary interlocks provided will avoid malfunctioning of the plant, like   1. High level float switch will stop the inlet pump, to avoid flooding of the degassing chamber. 2. Unless the inlet pump is 'ON' the heaters will not be energized. 3. Low level float switch will stop the outlet pump to avoid dry running of the pump During the filtration process, the moisture meter, installed in the inlet line, will display the moisture content in PPM, continuously, on it's indicator, on the control panel. Once the desired PPM (moisture) content is achieved, the moisture meter installed in the inlet line, will shut down the plant, automatically. This plant will also run with Manual Interference means with Manual Operation.

We are offering oil filtration system, incepted in the year 2003, veeraja industries is a reputed name in the field of coolant filtration and filteration equipment such as industrial agitators, filter cartridges, industrial stirrers, flat bed pressure filters. Understanding the complete industrial scenario we have stepped into this business. under the patronage of our technical director mr. Prasad mate who is the recipient of prestigious "parkhe award" for "rotary disc pre-coat pressure filter" and has been providing filtration solutions to machining, bearing, and rolling industries for last 25 years, we have created a wide market recognition. We also provide standard filtration equipment ranging from magnetic separators, paper band filters, up flow filters to vacuum filters, flat bed pressure filters. In a short tenure, we have already designed and supplied more than 20 centralized systems. We know the functioning of each and every part and accordingly work towards the designing process so that the best can be delivered to the clients.

• Brand Name: GEN-NEXT
• Automation Grade: Automatic
• Material: Paper Core

oil filtration systems, Food Processing Machines

Oil Filters, Fresh Coconuts, seedless dry grapes, Brick Making Machine