Oval Gear Flow Meter Dealers in Pune

The MicroSet Electronics type Flow Meter is compact design, high performance, reliability, accuracy (Up to 0.5% accuracy). It has Low pressure drop. Widely used in industries of petroleum, chemical processing, medicine, transportation food etc.   Features:• High precision, durable and compact turbine flow meters.• Modular design allows for use with Output Modules, Sensors and Remote Transmitters.• Local Display Computer features: 2 Totals (1 Resettable, 1 Cumulative)• User Calibration Mode• Internal parts are simple to replace for easy maintenance.• Lightweight, compact design allows for easy installation.• Powered by Lithium batteries for approximately 9,000 hours.

• Brand : SAN-VIJ: FLOW RATE 50 LPM
• Size : 25MM: FOR OIL / FUEL USE
• Material : ALUMINIUM / PPS: DIGITAL DISPLAY PROVIDED

we  offer  25mm  Oval  gear  flowmeter  with pulse o/p or with  digital  flow  rate  Totalizer, Batch  controller  suitable  for  oil , fuel  at  flow  rate  50 LPM ( max ) End  connection : 1 Inch  BSP  Threaded, MOC : Aluminium with  PPS  Rotor

• Brand Name: DMS
• Size: 1/2 inch
• Application Media: Water

With outstanding storage facilities, we are capable of making fast and urgent requirements of the customers. Owing to our automated and spacious infrastructure, we make systematic packaging followed by delivery to the clients in set time. We maintain proper schedules for the delivery of bulk or urgent consignments so as to deliver the range in set time and gain utmost customer satisfaction.

• Steel: 10mm,15mm,20mm,32mm,40mm,50mm,65mm,80mm,100mm,125mm,150mm,200mm,250mm,300mm,400mm,500mm,600mm,800mm,1000mm

This type of flow meter has oval shaped gears/ with fitting teeth which control the amount of fluid passing through. The flow rate is calculated by number of times the gears are filled and emptied. These meters have high accuracy and are used for measuring low flow and for high viscosity fluids. It is very easy to install these types of meters because it requires no pipe. Two identical oval rotors mesh together by means of slots around the gear perimeter. The oval shaped gears are used to sweep out an exact volume of the liquid passing through the measurement chamber during each rotation. The flow rate can be calculated by measuring the rotation speed. Close tolerances ensure that leakage is minimized. In contrast to nutating disc meters, the calibration factor does not vary with viscosity. Though claims for high performance are made, oval gear flowmeters are generally not as precise as the sliding vane design. Another disadvantage is that pulsations are introduced into the flow by the meter. Oval gear meters are typically used in the measurement of solvents and 'dry' liquids. Maximum viscosity allowed: 1,000 centipoise. Other Information Pay Mode Terms: Other Minimum Order Quantity: 01 Piece/Pieces Port of Dispatch: Nhava Seva Production Capacity: 30/month Delivery Time: 1-2 weeks Packaging Details: One Flowmeter In One Wooden Box

Oval gear flow meter is used to measure oils and high viscousity liquids without sacrificing the accuracy of flow. This oval gear pulse meter also has a variety electronic choices that you can choose from like the GG500. Buy this positive displacement flow meter in aluminum, or stainless steel.

• Accuracy: ±10% for lower sizes  ±1% for higher sizes
• Power Supply: 12-24 V DC ±10%
• Size Ranges: Rp 6mm to Rp 20mm (1/8” to 3/4”)
• Flow Ranges: 0.12 LPH to 500 LPH  (0.0005 GPM to 22 GPM)
• Max. Inlet Pressure: 0.3MPa for lower sizes  0.98MPa for higher sizes
• Detection Method: Magnetic Sensor
• Response Frequency: Max. 100Hz
• Max. Transmission Distance: 1 Km
• Fluid Wetted Materials: PEEK Resin, PPS Resin, Special Resins, Stainless Steel

Oval Gear flow meters are positive displacement type ideally suited for high viscosity fluids and for monitoring low flow rates. These are available with rotors made of special materials like PPS resin, PEEK resin, Stainless Steel and other special resins. Viscosity ranges from 0-5 mPa s to 500 mPa s and can be handled under operating temperatures from -10°C to +60°C. These are simple, elegant and firm constructions with built in pulse generators. Multiple flow control systems can be made up with Valvings. Ideally suited for fine chemical processes, combustion appliances, and humidification appliances.    

Oval Gear Flow Meters, DC Diesel Transfer Pump - 2, automatic fuel nozzle