Paint Dealers in Dhankawadi, Pune (32 products available)

With the aid of modern facility and quality packaging material, we guarantee that the offered lot will reach the destination within a given time frame. We also make sure that the material is sourced from the certified vendors. Catering to the varied demands of the customers, we ensure that the offered array of products is as per the exact customers' demand and need.   Product Details: Minimum Order Quantity - 10 Litres Application Method - Brush ,Spray Color - White ,Blue ,Red ,Black ,Yellow Form of Paint - Liquid Packaging Size - 10 L   Details The extensive range of Road Marking Paints offered by us is widely used on highways and for industrial markings. The Ugam Road marking Cold application paints are provided with glass beads. These Paints have excellent light reflectance and tough coating as these are based on acrylic latex. Our hot melt type coatings are available in powder form. These are heated in machine and applied on the surface spray and then the glass beads are spread over before cooling. These coatings are also called retro-reflective coatings. The technical specification is correct to the best of our knowledge and under test conditions and we do not accept any liability towards misuse and contents of it. Product must be tested for specific use prior to use.For further details or any queries please do not hesitate to contact us.Additional Information: Item Code: UgamRoadMarkingPaints

• Packaging Type: Paper Box
• Coating Thickness: 0.5-1mm, 25-75 micron
• Speciality: Chemical Resistant, Water Resistant, Solvent Resistant
• Packaging Size: 1, 5 or 20L
• Usage: Industrial Use
• Brand Name: Humiseal
• Material: Acrylic,PU and Silicon
• Certification: UL,MIL,IPC,GX
• Shelf Life: 2Year
• Color: Clear
• Purity: 100
• Grade Standard: Industrial Grade
• Texture: Soft
• Form: Liquid
• Surface Finishing: Polished
• Country of Origin: India
• Waterproof: Water resistant
• Soluable In Water: No
• Weight Per Litre: 1 kg
• Density: 0.895
• Softening Point: 125
• Melting Point: 200
• Compressive Strength: nil
• Drying Time: 15 min
• Moisture: nil
• Specific Gravity: 0.895
• Viscosity: 200-350 cps
• Acid Value: nil
• Melting Temperature: nil

We are offering silicone emulsions mould release agent (ss em) is silicone fluid emulsions which are inert, heat stable, non-toxic products, covers many industrial applications where lubrication, gloss, antistatic, protective and release properties are advantageous.

we offer wide range of fire rated paint. steel protection offered by promat's revolutionary technology by using either spray or paint or board cladding. The thickness of the coating is determined by calculating hp/a ratio of the steel section. we offer following systems: cafco spray film wb3 intumescent paint cafco fendolite and mandolite vermiculite spray promatect h board cladding

Silicone Antifoam Emulsion, Speciality Silicone Products, antifoam emulsion

• Packaging Size: 5 Litre
• Packaging Type: Plastic Bucket
• Paint Type: Emulsion
• State/Form: Liquid

Magsol WELD THRU PRIMER 100 ML, Magsol Dashboard Polish ( 100gms )

Back Paints, Chinese Glass Crystal, diamond glass cutter

stencil paints, stencil inks, Painting Stencil

• Coverage** surface by Brush.: On Smooth and non-absorbent surface. 20 Sq.ft/ per Kg.
• Drying Time: Surface Dry: 30 minutes.
• @27° ± 2°C & RH 60 ± 5%: Recoating: Min. 4 - 6 hrs.
• Gloss Levels/ Sheen levels: Matt
• Thinning: If required with water.
• Stability of Thinned Paint.: Use within 24 hrs.
• Shelf life: 1 year from date of manufacture in original tightly closed. Containers away from direct sunlight and excessive heat.

PERFORMANCE FEATURES & BENEFITS 1. Smooth and pleasing finish.2. Ease of application.3. Accelerates speed of work.4. No undulations.5. Optimum Performance.   RECOMMENDED SYSTEM FOR APPLICATION Ensure the surface is clean; dry free from all defective or poorly adhering material, dirt, grease, wax etc. Remove all loose or poorly adhering materials by rubbing down using suitable abrasive paper and thereafter wipe off. Treat fungus affected area. Allow to react for 6 – 8 hrs. For new masonry surfaces must be allowed to cure completely. It is recommended to allow 28 days as the curing time for new masonry surfaces. CLEANING Surface should be free from any loose paint, dust or grease. Growths of fungus, algae or moss should be removed by wire brushing and water. In case of areas having excessive dampness use Damp Block to limit further dampness. In case of dents and holes use Laxmi spray plaster/wall putty or white cement and fine sand in the ratio 1: 3.    

Pain Killer, Antibiotic

oil paints, Distemper, spray plaster, synthetic enamel paints

epoxy flooring primer

wall texture, Glass Films, window films, Wall Murals, wall tattoos

cold galvanizing sprays, zinc rich metal finishing products

school paint, Safety Coverall, Female Ot Uniform, School Skirts

Paint, Tin Plates

Asian Emulsion Paints, 24 hours towing, interior

paper colour, Carbonless Computer Stationery, ATM Paper, paper billing roll

Luminescent Paint

flame proof paint, industrial plastic paints, automotive plastic paint

thinner, hardener

Wire Enamel Varnish, Interior Primers, Cold Curing Epoxy System

Epoxy Coating, Residencial Painting Service, texture painting services

Varnish, thinners

Dry Distemper, Primers, Allied Products

Industrial Paints

Industrial Paints, Powder Coatings