Petrochemical Refineries Dealers in Pune

• Application: Soya Oil, Sunflower Oil, Palm Oil, Corn Oil, Rice Bran Oil
• Type: Refinery Plant
• Brand Name: Brissun
• Design: Customized
• Capacity: 25 - 500 ton / day
• Process: Veg Oil /Edible Oil

Lube Oil Blending Plant designed and supplied by Balaji Consultants are used for processing various grades of automotive and industrial lubricants. We set these plants are tailor made to meet the several requisites of clients. In this plant the base oil and the various additives and blended under hot/ cold condition depending upon the grade of oil being formulated. Finally the filling of finished lube oils into containers of various sizes are carried out. This plant is can supplied as a fully automatic batch process with the help of load cells and PLC – SCADA control System.

Backdrop : Devastating long-term ill-effects of limited fossil fuel reserves, industrial & automotive emissions and greenhouse gases have focused the attention of policy makers and others throughout the world to search for alternative energy sources. Solar radiation, wind and biomass are resources for generation of alternative energy in vast quantities of which biomass is already proven for techno-economic viability for commercial production of a major alternative energy - BIODIESEL. The U.N. framework for climate change [Kyoto Protocol, 2005] mandates member nations to reduce greenhouse gas emission through increasing use of biofuels i.e. bioethanol and biodiesel. Global production of biofuels is growing steadily and will continue to do so despite financial slowdown. The world biofuel market’s value is likely to attain a CAGR of around 14.7% during 2006-2016. The rapid development of the global biodiesel industry has been closely observed by countries interested in stimulating economic growth, improving the environment and reducing dependency on imported oil. Chemically speaking, biodiesel is the methyl ester of long chain fatty acids derived from vegetable oils animal fats. It can be used in compression ignition engines (diesel engines) directly, the engine needing minor or no modifications. Raw Material for Biodiesel : Biodiesel can be commercially produced from various sources (Oil seeds – both edible and non-edible, dead wood and leaves, agri-wastes, food processing wastes – both kitchen and industry etc. can be used, oil seeds being the most important, abundant and common raw material). Different regions of the world do not have the benefit of possessing the same vegetable oil or animal fat in plentiful supply. Thus raw materials for biodiesel production have become geographically region-specific. Palm oil seeds in Malaysia, animal fats in Japan, soybean seeds and animal fats in the US, canola seeds in Canada and rapeseed and animal fats in Europe are examples. India has taken up Jatropha [ Jatropha curcas ] seeds as the major raw material. The plant may yield more than four times as much fuel per hectare as soybean, and more than ten times that of maize (corn). A hectare of jatropha has been claimed to produce 1,892 litres of fuel. Advantages of Biodiesel Over Petrodiesel : Less dependence on limited fossil fuel reserves Improved ignition Higher engine efficiency Better lubricity Much lower greenhouse gas emission Lower particulate emission Not toxic, free of sulphur Safest fuel to store and handle Much higher flash point No aromatics or carcinogens Biodegradable FenixShutek Technology for Biodiesel : Fenix has exclusive technology collaboration with M/s Shutek Oleo S A of Costa Rica for Biodiesel. The process uses trans-esterification reaction followed by neutralization and washing steps. The two-step trans-esterification converts nearly 100 percent of the triglycerides in the oil or fat to bio diesel (methyl ester). The excess methanol is recovered, and the biodiesel dried in the same step. Finally, the bio diesel is filtered to remove potential impurities formed below the process temperature. In essence, the steps are, trans-esterification, washing, drying and polishing. Almost any seed oil can be used as the raw material for FenixShuyek Biodiesel Technology. Glycerine Recovery Glycerine generated in the two-step trans-esterification reaction is recovered and neutralized. The excess methanol is recovered and the glycerine dried in the same step. The glycerine is considered crude glycerine because it contains greater than the maximum 0.01 percent salts allowed in technical grades and is less than 99 percent pure. The salts are formed from the reaction of the caustic and acid used in most trans-esterification processes. The salts are removed when the glycerine is distilled or refined to a technical grade or higher quality. Water Recovery Water recovered from the water wash decanter, strippers, and methanol distillation is reused for washing the bio diesel and diluting the acid and caustic. Methanol Recovery The excess methanol is recovered from the bio diesel, glycerine, and fatty matter, dried and reused in the two-step trans-esterification reaction. Fenix uses it own structured packing columns for effective distillation of methanol. Fatty Matter Recovery A small amount of fatty matter, typically mono- and di-glycerides, is generated in the trans-esterification reaction. This fatty matter does not require a separate recovery system due to the small quantity generated, and can be skimmed or decanted from the glycerine storage tank. If the trans-esterification process feedstock has a high amount of free fatty acid (FFA), then a separate fatty matter recovery step may be required. Energy Fenix design minimizes the energy required by using gravity both for separation and flow from vessel to vessel. The design incorporates heat economizers to cool one stream while heating the other.

• Brand Name: Shivaay Engineers
• Place of Origin: Pune  
• Features: Suitable to break fruit in fruit jam processing, fruit cream and fruit juice etc.
• Quality: Eye-catching appearance, fine design, excellent finish and sturdiness
• Production Range: Min 300 Kg /Hr Max 30.000 Kg/Hr

Backed by rich industry experience, we are engaged in offering a qualitative grade Fruit Refiner. As a Manufacturer and Exporter, we take pride in presenting our customers with the highest quality they can get. It can be purchased at market leading prices by our customers. It is known for its eye-catching appearance, fine design, excellent finish and sturdiness. Lay your hands on it at reasonable rates.Features : Turbo Refiner Suitable to break fruit in fruit jam processing, fruit cream and fruit juice Suitable also in tomato processing line to make concentrate juice, passata and sauces. The hammer mill makes the first break then the Refinery separates the skin and seeds from puree pulp. A heating system can be provided to increase the refiner yield. The refiner is available with different screens hole in accordance with the output required. For big capacity plant two Refineries Machine are provided. Production Range  :  Min 300 Kg /Hr  Max 30.000 Kg/Hr

• Weight: 1000-2000kg
• Voltage: 380V
• Automatic Grade: Automatic
• Driven Type: Electric
• Warranty: 1year
• Brand Name: CentPro

• Application: Bio Diesel Processing
• Voltage: 220V
• Automatic Grade: Automatic
• Power: 10-20 Kw
• Driven Type: Electric
• Production Capacity: 1,000 to 50,000 LPD
• . Warranty: 2years

• Type: Biodiesel Production Plant
• Application: Producing Diesel
• Certification: CE Certified
• Automatic Grade: Semi Automatic
• Driven Type: Electric
• Warranty: 1year

Choosing the right technology partner for biodiesel processing is critical to meet the challenges of feedstock treatment, yields, quality and consumptions of chemicals & utilities. DVC Process Technologists offers the best solutions for commercial viability in the processing of the most challenging feedstocks, through both chemicals as well as enzymatic routes over various capacities.

hese plants are designed to remove water blended with other compounds in various distilleries producing alcohol ("ethyl alcohol" or "ethanol")Ethanol technology for beverage, fuel and industrial uses.Our goal will be to supply a distillery Plant with the appropriate technology for each client’s needs. Emphasis will be on energy saving, reducing waste water and project management.

• Automatic Grade: Automatic
• Voltage: 220 - 440 V
• Material: Stainless Steel
• Features: Constant Product quality, Lowest Energy Consumption.
• Power Consumption: 10 - 50 Kw
• Surface Finishing: Coated

• Application: Soybean Oil
• Brand Name: DVC
• Automation Grade: Automatic
• Capacity: 1-5 ton/day,5-20 ton/day
• Material: MS
• Voltage (Volt): 380 V 

• Material: Mild Steel
• Country of Origin: Made in India
• Application: Chemical Industry
• Capacity: 30kg/day
• Automation Grade: Automatic
• Power Consumption: 1000kW
• Brand/Make: Vincitore
• Frequency: 50 Hz
• Operating Voltage: 340 V
• Surface Finishing: Powder Coated
• Phase: Three Phase

• Voltage: 420 V
• Country of Origin: Made in India
• Automation Grade: Automatic
• Phase: Three Phase
• Usage: Industrial
• Power Source: Electric
• Frequency: 50-60 Hz

Two units meant for light and heavy feeds, Project Details:Operating Temperature: 450°C, Operating Pressure: 150 bar.g, Catalyst capacity: 250 ml,6 Tubular Fixed Bed Reactors,All 6 reactors can be operated in Series or 3 & 2 reactors can be operated in series independently, Separator Section With 2 Phase Separator , PC-PLC based control system.

• Material: Mild Steel
• Voltage: 440 V
• Country of Origin: Made in India
• Application: Industrial
• Capacity: 2000 Litres/Hour
• Automation Grade: Automatic
• Frequency: 50 Hz

MEGA is a global process solutions company offering energy efficient solution to the Ethanol Industry, worldwide. To process various feed-stocks, we offer Robust, Reliable and Most Efficient Fermentation Technologies:

Excel Engineering & Consultants is now offering turnkey solutions for ethanol production from Sugarcane Juice, Sugar Cane Molasses & Sweet Sorghum. These plants are designed to remove water blended with other compounds in various distilleries producing alcohol ("ethyl alcohol" or "ethanol")Ethanol technology for beverage, fuel and industrial uses. Our goal will be to supply a distillery Plant with the appropriate technology for each client’s needs. Emphasis will be on energy saving, reducing waste water and project management. Excel plays a pivotal role in the development of an ethanol project right from understanding project requirements, conceptualization and scheduling up to project commissioning. That's why Excel Consultant is a famous ethanol plants supplier and manufacturer in pune, India.

This is a modern and special steel manufacturing processor for high quality steel required in special application like nuclear, missile, battle tank, Ships etc.         The electrical equipment consists of a high current single phase transformer which in our manufacturing program and a very sensitive high current and medium voltage regulator which has a moving brush on the LV helical winding giving a very fine voltage control. Range:- up to 40KA secondary current

Salt is the common name for the substance sodium chloride (NaCI), which occurs in the form of transparent cubic crystals. In industry salt with its' converted forms such as chlorine, caustic, soda ash are being used in various industries such as petrochemical refining, petro chemistry, organic synthesis , bulk drug and pharmaceutical industries. In consideration of edible salt it should be processed hygienically so as to make it consumable for human being, which raises the need of suitable refining process of salt to meet today's demands such as its purity, color, crystalline nature, particle size distribution and free flowing behaviour.

We provide Edible Oil Refinery Plant that is based on modern technology to refine a variety of edible oils. We design & supply customized edible oil plants as per local conditions and quality of oil. We manufacture all the equipment using modern manufacturing facility, which is ISO 9001-2008 certified by International Accredited Agency and export these plants on a turnkey basis. Our Plants are Highly Energy Efficient, low processing cost and deliver best quality Refined Oil. We are specially known as leading Rice Bran Oil Plant Suppliers, for providing plants that produces quality refined Rice Bran Oil. BRISSUN PLANTS ADVANTAGES : Maximum reduction of FFA and colorCustomised & latest technologyLow Consumption of UtilitiesLower Maintenance CostBland Oil with Maximum Shelf LifeRefined Oil Accepted by Most Multinationals Suitable For Refining : Rice bran oilSunflower OilMustard OilRapeseed OilSoybean OilCotton Seed OilPalm oil Refining by : DegummingBleachingDe-waxingDeodorizationFractionation Capacity : 25 TPD - 500 Tons per day

Holding years of experience and knowledge in this industry, our company has been able to mark its strong presence in the market as one of the most excellent manufacturers and suppliers of Fuel Ethanol Plants. These plants are designed to remove water blended with other compounds in various distilleries producing alcohol ("ethyl alcohol" or "ethanol") for beverage, fuel and industrial uses.

• Automatic Grade: Automatic
• Capacity: 30 Ton/day
• Types: BATCH AND CONTINUOUS TYPE

Dhruv Fabrotech have gained a remarkable position in the industry by offering a qualitative assortment of Silver Refinery. The provided plant is designed by our skilled professionals using advanced technology and premium quality raw material in adherence with industry standards. Used to refine silver in refining industry, the offered plant is strictly tested by our quality examiners on various parameters so as to ensure its durability. Clients can avail this plant from us nominal price. Features: • High tensile strength • Accurate dimensions • Easy usage • Fast & Good performance. Additional Information: • Pay Mode Terms:T/T (Bank Transfer) • Delivery Time:4 weeks

• Power: Based On Capacity
• Brand Name: ARKChem
• Weight: Based On Capacity
• Country of Origin: Made in India
• Capacity: As Per Requirement
• Usage/Application: Palm Oil
• Automation Grade: Automatic
• Design: Customized
• Material: Stainless Steel
• I Deal In: New Only
• Power Consumption: Based On Capacity

• Features: Long lasting, Dimensionally accurate, Industry proven designs.

The pooled knowledge and experience of the core team of TEXOL spans over 100 person-years, promising the best of engineering expertise for a wide spectrum of chemical processes, technologies and innovative ideas. Team TEXOL offers custom-built, modular process plants at par with global standards.

We are listed among the most dependable Cooking Oil Refinery Manufacturers and Exporters from India. Various national as well as international clients are placing huge and repeated orders for the Edible Oil Refining Machine due to the unmatched quality and inexplicable performance exhibited at respective applications. Moreover, the materials used in the manufacturing of the Edible Oil Refinery are of premium quality that ensures high durability and resistivity to various corrosive attacks. The Edible Oil Refinery offered by us are also easy to install and required low maintenance cost. Additionally, these also require relatively less electricity and gives maximum output in comparison to the Edible Oil Refinery available in the market.

• Country of Origin: Made in India
• Voltage: 440 V
• Usage: Biodiesel electricity generator
• Capacity: 500 liters/day
• Automation Grade: Automatic
• Phase: 3
• Power Consumption: 25 kW
• Frequency: 60 Hz
• Body Material: SS

• Biodiesel: Processor
• 300 sq.ft.: 84"

We manufacture Biodiesel processing plant & machine. Our speciality is Multifeed Biodiesel processor with Chemical & process formulation is given by us alongwith biodiesel processor. 1)500 LPD Biodiesel processor - Amount- Rs.375000/- 2) 1000 LPD - Rs.725000/- 3) 2000 LPD- Rs.1400000/- 4) 3000 LPD -Rs.2075000/- Above 3000 LPD as per customers requirment please.

Unlike petroleum diesel, biodiesel is a renewable resource, and it creates less pollution than Petroleum Diesel. It can be used alone or in combination with petroleum diesel, or with heating oil. Generally, no expensive modifications to the engines are required. This makes it easier to integrate biodiesel into current systems than other alternative energy sources, which often require new equipment.