Pioneer Castor Pimpri Chinchwad, Pune, Maharashtra

Cast iron wheels with either V-groove (VG), Square groove (SQG), or a Flange (FLG) are available depending upon the track over which the castors has to move. Since the wheels roll over steel track, the pushing or pulling force required is much less, reduces labour fatigue. Floor surface also does not get damage at any time. Hardness of Casting : ( 175 ±10 ) BHN Grade of Casting : FG200 as per IS-210 Maximum Working Temperature : 250°C

These are bare cast iron wheels made from good quality graded casting, machinable & free from blow holes. These wheels have very high load carrying capacity & are suitable for high temperature applications like ovens, foundries etc. The only disadvantage of CI wheels is that they damage the costly floor surfaces. Hardness of Casting : ( 175 ±10 ) BHN Grade of Casting : FG200 as per IS-210 Maximum Working Temperature : 170°C

These wheels are manufactured by compression molding shredded cotton fabric, soaked in good quality phenolic resin. The hardness of Fibre wheel is higher than the hardness of UHMW wheel. As a result, the chance of steel burr lying on the shop floor getting embedded in the wheel surface is remote. The acidic or alkaline chemicals have little effect on these wheels. Hardness of Wheel : ( 90 ± 5 ) on Shore ‘D’ scale Maximum Working Temperature : 1700C

These are manufactured from virgin Ultra High Molecular Weight Poly Ethylene (UHME-PE) powder, white in colour. These wheels are light in weight but have very high load carrying capacity, higher wear resistance as well as high impact strength. Therefore the question of wheel cracking under load or impact load does not arise, as it happens in case of nylon or fiber wheels. The material has got very low coefficient of friction. Therefore, pulling or pushing force required is considerably less. The material does not have any effect of chemicals or acids. Though the UHMW wheels can carry heavy loads, the material is not hard like cast iron. Therefore UHMW wheels do not damage the flooring. As the UHMW material has got very low coefficient of friction, ball bearing has tendency to rotate in the step bore. To avoid this, metal insert is pressed in the wheel. The metal insert has step bore suitable for ball bearing

These wheels are manufactured from virgin Nylon 6, white in colour, by injection molding. These wheels are light in weight, but have high load carrying capacities. These wheels can be used up to 90°C temperature. The acidic or alkaline chemicals have no effect on these wheels.

These wheels are manufactured from virgin Poly Propylene Co-Polymer (PP-CP), white in colour, by injection molding. The wheels are light in weight but have fair load carrying capacity. The acidic or alkaline chemicals have no effect on these wheels.

Polyurethane with high abrasion resistance bonded ( molded ) over a cast iron core forms a PU-CI Wheel. The load carrying capacity as well as life of wheel is much more than that of PU-PP wheel. PU-CI wheels have good shock absorption capacity & very low noise level.

A good quality rubber compound bonded ( molded ) over a cast iron core forms a Bonded Rubber Tyre Wheel. The load carrying capacity as well as life of BRT wheel is much more than that of SRT wheel. Castings can be returned back to us for re-bonding of rubber when it is worn out

The wheel consists of Solid Rubber Tyre clamped between two presses steel drums with nuts & bolts. Tyre is made from good quality rubber compound to ensure long life & good cushioning effect. The tyre, when worn out, can be replaced easily on sight.

The track castors are designed to use over inverted angle iron tracks or over square section or over rails. Cast iron wheels with either V-groove or square groove or a flange are available depending upon the track over which the castors have to move. Since the wheel rolls on steel track, the pushing or puling force required is much less. This reduces labour fatigue. Floor surface also does not get damage at any time. The track wheels can be fitted in fixed & swivel brackets of MD or HD series

Heavy Duty Pressed Steel Castors are recommended where floor conditions are not good & loads are moderate. Load carrying capacity of Heavy Duty Pressed Steel Castor is much more than medium duty castors. These castors can withstand occasional shock loads & higher speeds. These castors are highly suitable for trolleys & equipments used in engineering industries, automobile industries & so on. SRT, BRT, PU-PP, PU-CI, PP, NYL, UHMW, CI wheels can be fitted in Heavy Duty Pressed Steel castors.

win castors have the advantages of greater load carrying capacity for the same castor height. The load is distributed over a wide floor area. But because of the differential movement of two wheels, the scrubbing action that arises on turning from the use of wide tread single wheel is avoided. The use of twin castor is, therefore, advantageous than use of single wheel castor with wider tread width of the wheel. Attachments such as wheel lock, wheel brake & swivel lock can be provided on these castors. SRT, BRT, PU-PP, PU-CI, PP, NYL, UHMW, FBR, CI wheels can be used in heavy duty twin castors.

Heavy Duty castors are recommended where floor conditions are not good & MD castors needs frequent replacement. These castors can withstand occasional shock loads & higher speeds. Heavy Duty swivel castors are of two types. i.e. HD-F & HD-C. However, important dimensions such as mounting holes, overall height etc. are exactly same for both types of castors. Therefore, matching fixed castor [ FX(HD) ] is same for both types of swivel castor. SRT, BRT, PU-PP, PU-CI, PP, NYL, UHMW, FBR, CI wheels can be used in heavy duty castors.

Medium Duty castors are designed to carry moderate loads i.e. more than LD or LD-X castors, and are suitable for various types of trolleys used in industries, warehouses, godowns, stores, railway platform and so on. These castors are also suitable for hospital furniture, laboratory equipments or food serving trolleys where load carrying capacity required is higher & the light duty castors need frequent replacement. SRT, BRT, PU-PP, PU-CI, PP, NYL, UHMW, FBR, CI wheels can be used in medium duty castors.

Light duty castors are suitable for hospital furniture, house hold furniture & equipments, laboratory equipments, food serving trolleys in hotels & canteen etc. where weight of material to be carried is small. Light duty extra strength castors are particularly suitable where LD castors fails too frequently & where loads are moderate. Both LD & LD-X castors looks like same. Only difference is LD-X castors are manufactured from higher plate thickness.