Pneumatic Conveying System Dealers in Pune

• Type: Pneumatic
• Brand Name: ARTHTECH
• Material: SS/M.S
• Certification: GMP
• Application: Food pharma,chemical
• Voltage: 220V/380V
• Condition: NEW
• Load Capacity: 100 KG to 100 TPH
• After-Sales Service Provided: After-sales Service Provided
• Application: Cement, PharmaceuticalDistillery, Chocolate Industry, Gaur Gum Plant etc.
• Power: 1 HP To 50 HP
• Capacity: Upto 60 TPH
• Material: Stainless Steel
• Surface: Galvanized

• Country of Origin: India
• Brand Name: Stratgem
• Capacity: 100-35000 Kg/hr
• Material: Stainless Steel
• Power: 5-20 HP
• Voltage: 410 V
• Automation Grade: Automatic

Features Most versatile systems Conveys wide range of powders Multi discharge type

Pneumatic conveying systems are basically quite simple and are eminently suitable for the transport of powdered and granular materials in factory, site and plant situations.

Lean Phase Pneumatic Conveying system, Dense Phase Pneumatic Conveying system   Plutontek, Designs & Manufactures, pneumatic conveying systems as a tailor made product, to provide solutions for bulk material handling. Design of system depends on the product characteristics, particle size, capacity, number of inlet sources and number of outlet / destinations, etc. Each pneumatic conveying system needs to be designed & customized as per the application given. Prime mover for conveying the product can be Roots blower, Compressor, Centrifugal blower, Centrifugal fan or Radial blower, depending upon bulk density of the material to carry, Length of the system, flow rate required and pressure required at outlet. System can run on both negative / positive pressure, depending upon the situation. At Plutontek, we have to consider all the given parameters to design the system and has to offer the optimum solution to customer in order to achieve economies in intial cost as well as running cost   You can rely on us for all your customized requirements of : Dense Phase Pneumatic Conveying systems Lean Phase Pneumatic Conveying systems / Dilute Phase Pneumatic Conveying systems  Combined Lean Phase and Dense Phase Pneumatic Conveying systems    "Dense Phase Pneumatic Conveying system : The main principle of a dense phase conveying system is to slow down the velocity of the product in the pipe conveyor to a point that is below the speed at which the product breaks or degrades. At low velocities, the product lies for periods of time in the bottom of a horizontal line and it is blown under pressure to the discharge point in slugs or plugs. The dense phase pneumatic conveying systems uses low volume, medium pressure air stream and relies on a continuously expanding volume of air pushing cohesive slugs of material along the pipe. This system uses a transfer vessel / pump tank to feed the material into the conveying line. It is a batch system with plugs of material separated by cushions of air. The velocity range at the source can be as low as 200 fpm but rarely exceeds 2000 fpm. Dense phase technology reduces the air consumption to the absolute minimum by allowing the system to convey at maximum density. Dense phase conveying is mainly used for high capacity and long distance conveying."   "Lean Phase (Dilute Phase) Pneumatic Conveying system : The main principle of a Dilute Phase conveying system / Lean Phase Pneumatic conveying system is to use a relatively large amount of air to convey a relatively small amount of material and at lower pressures than dense phase systems. The material is transported at high velocities through the system while being suspended in air. It is often referred to as suspension flow because the particles are held in suspension in the air as they are blown or sucked through the pipeline. To keep the material in suspension, it is necessary to maintain a minimum conveying air velocity. There is virtually no limit to the range of materials that can be conveyed with dilute - phase system. Products commonly conveyed in dilute phase systems include cement, fly ash, fine particles, flour, resins, specialty chemicals, ground feeds, and granular and palletized products. A dilute phase system will generally be lowest in capital cost but slightly costlier with operating cost compared to Dense phase conveying system which is exactly vice versa. This system also can run on both positive (pressurised) / negitave (vacuum) technique. ance conveying."   "Combined Lean phase and dense phase pneumatic conveying system This system uses both  - Combination of Negative - Positive Pressure i.e. pull-push system which has the advantages and benefits of both negative and positive pressure arrangements in a single system. These systems are used where there are multiple material entry points, and multiple delivery points. A very common application is the unloading of a standard railcar. This system of conveying is given only on specific customer demands."

• Country of Origin: India
• Type: Pneumatic Conveying System
• Voltage: 415V
• Condition: New
• Automatic Grade: Automatic, Fully Automatic
• Brand Name: Rajdeep
• Production Capacity: 0.1 - 75 TONS/HR
• Material of Construction: M.S, SS 304, SS 316

Rajdeep’s specialized designs of Pneumatic Conveying systems for all dry material (Powder / Pallets). Our pneumatic systems have high degree of flexibility, required low space & low maintenance & also weatherproof operation. Rajdeep has large solid’s data bank & experience of number of installations and expertise in Pneumatic Conveying.  Rajdeep’s proven Capabilities in Conveying System : Conveying Capacity up to 35 Ton Per Hour Conveying Length up to 300 Mtr Conveying solids BULK Density ranges from 150 – 2200 Kg/m3 Conveying with Close Loop System by conveying media Inert Gas (Nitrogen) Solids conveyed like PTA powder, Polyester chips, LLDPE, ESP Dust, Talcum Powder, Grain Flour & many more.   A pneumatic conveying system is a process by which bulk material of almost any type are transferred or injected using a gas flow as the conveying medium from one or more sources to one or more destinations. Air is the most commonly used gas. For hygroscopic materials dry air can be used, and for potentially explosive materials an inert gas such as nitrogen can be employed.   Pneumatic conveying is more practical & economical method of transporting solid from one location to another than the mechanical conveying (Belt conveyor, Screw conveyor , vibrating conveying etc. ) because of following three reasons:- These are totally enclosed and if required can operate without moving parts coming in to contact with the conveyed material. Being enclosed very clean, environmentally acceptable & easy to maintain. Very economical to install & operate Very Flexible interms of routine & expansion Can convey any product at any place.   Types of Pneumatic Conveying Lean/ Dilute Phase System Dense Phase Conveying System  

• Color: Green
• Voltage: 110V
• Automatic Grade: Fully Automatic
• Power: 10-15kw
• Driven Type: Penaumatic
• Warranty: 1year
• Weight: 1000-2000kg
• Application: Industrial
• Griding Capacity: 25-30 Kg/Hr
• Load Capacity: 100 KG to 100 TPH

  We provide Pneumatic Conveying System for conveying Powder, Granuels, etc. Our Pneumatic Conveying System is available in food grade stainless steel version, Mild Steel version and also In F.R.P. Material Version. We supply Pneumatic Conveying System as per customer requirements.     We manufacturer of Pneumatic Powder Conveying Systems for MCCP Powder, Zinc Sulphate Powder, Lime Powder, Wheat and Rice Flour, etc     Features : • Easy to Operate • Increase the Production • Reduce Manpower • Hygienic • Reduce the wastage This is the process of conveying /transporting bulk material through a pipe line by either negative or positive pressure air system. The air , when moving with specific velocity, will carry material comes in its path. This system are designed by vast experience, rather than just by formula. Hindustan offers specialize designed system which offers considerable economy.     BASIC COMPONENTS :     Blower/ Fan Rotary feeders Loadings Tees Diverter valves Dust separators (optional) Control systems

We are engaged in manufacturing, supplying and exporting Pneumatic Conveyor Systems. These systems are manufactured using high grade raw material. Moreover, our experience has given us knowledge in conveying different kind of materials and also designing custom built equipments. Pneumatic conveyor system is method of conveying powdered material such as powder & granules of size from few microns to 25 mm. PES offers Dilute phase conveying systems. Dilute phase conveying system uses low pressure air at pressure less than 1 bar in case of pressure conveying and 5000 mm in case of vacuum conveying which is generated by positive displacement type roots blower or by centrifugal blower. Furthermore, we offer these conveying systems at market leading prices. Application: Cement, Bleaching earth, Powder, Grains, Fly ash,Gypsum and many more. 1. VACUUM CONCEPT CONVEYING SYSTEM  The Vacuum Concept Conveying System is a dilute phase, medium to high velocity, low pressure, continuous vacuum conveying system for shorter distances. It is generally used to convey low to high density, non-abrasive and semi-abrasive materials. Examples include Bleaching Earth, sugar, ironoxide, titanium dioxide, silica flour, cement, and limestone. The material is fed into the conveying line on a continuous basis by vacuum. Air Saver technology is used to minimize and optimize the low pressure supply air which is supplied by a low pressure positive displacement blower. The system includes a vacuum pickup nozzle, a vacuum filter receiver, a rotary airlock feeder and a positive displacement blower. 2. PRESSURE CONCEPT CONVEYING SYSTEM  The Pressure Concept Conveying System is a dilute phase, low pressure, high velocity, continuous conveying system. It is generally used for conveying low to medium density, and non-abrasive bulk solids where degradation of the conveyed material is not a concern. Examples of materials include flour, sugar,salt, grain, malt and plastic pellets. This concept utilizes a rotary airlock feeder to control the feed rate into the conveying line. A low pressure positive displacement blower is used for the air supply.

• Type: Pneumatic Equipment

DeGATECH in collaboration with Adroit group, has ventured in the field of Pneumatic & Hydraulic products.  This vertical is handled by its experienced and dedicated employees who have been catering to Indian Industry since almost 3 decades. Company manufactures Hydro-pneumatic Equipments, Large Bore Double Acting Pneumatic Cylinders, Hydraulic Automation Systems, Hydraulic Equipments, Pneumatic Equipments, Hydraulic Valves, Pneumatic Actuators, Pneumatic Automation Systems, Pneumatic Valves, Power Pack Unit, Pressure Switches, Rotary Actuators, Control Valves, Feed Control Cylinders.

The system is totally enclosed, and if it is required, the system can operate entirely without moving parts coming into contact with the conveyed material. High, low or negative pressures can be used to convey materials.

• Brand Name: SGEI
• Material: Stainless Steel
• Automation Grade: Automatic
• Design: Customized
• Conveying Distance: 10-200 metre
• Work Efficiency: 95%
• Conveying Power: 0.1-30 t/h
• Density: 800kg/m3
• High Velocity Conveying: 3200 - 8000 fpm
• Convey Rates: Less than 1 to 50 tons/hr
• Operating Pressure: Up to 14.7 psig
• Air Material Ratios: Greater Than 2.0
• Conveyor Capacity: 100-30,000 kg/h

We are in to manufacturing of HYPN since 1994. More than 1000 installations are the testimony of our expertise and quality of manufacturing. We offer the following products and services. HYPNS with 1 to six pumps running in parallel Pumps in parallel and in series for high head application, with out break tank Pressure switch/VFD controlled systems Bladder vessel in pump room or at top level in the zone. PUMPS :We offer following types of pumps depending upon clients requirement/suitability at site Vertical in line st. steel (AISI 304) Type- HYDRO BOOST-R Mono submersible pumps for low and medium head application-HYDRO BOOST-SM MONO BLOCK pumps for low and medium head ,economical duties- Type HYDRO BOOST-M Submersible pumps in casing pipe, Type- HYDRO BOOST SC VERT/HORIZONTAL Submersible Pumps-HYDRO BOOST-S HYPN System DESIGN :We offer the systems as per consultant’s client’s design. We also provide free design service upon getting full information from the client CONSTRUCTION :HYPN Systems are packaged units consisting, pumps, piping, bladder vessel, control panel duly piped and wired. All components are mounted on Base frame. At site it is only required to give suction and delivery connection, and one electrical connection. In some cases components are sent separately to avoid bulky packaging. These are assembled at site RANGE :The HYPNS are offered in wide range of duties, without any limit for Discharge and Head. HYPNS suitable for working efficiently in wide range of capacities. Low demands are met by Bladder vessels.The HYPNS can be offered in material of construction as per requirement. APPLICATIONS : As a domestic and flushing water supply, Hot water supply units in Multistoried buildings, Colonies, Industry etc As a water supply unit for curing water to cement plastered walls and ceilings

FOR CONNECTING RODS Big, Twist, CD Big End DIA and Small End DIA Squareness with respect to Face FOR CRANK SHAFT Pin Hole Dia, Shaft Dia, Center Distance between Hole and Shaft FOR CYLINDER BLOCK/LONG LENGTH COMP. Dia at multilevel, taper and oval Sqaureness FOR GEAR BLANK ID,OD,Concentrity, Face Parellelism, Depth Sqaureness SPECIAL TAPER AND ANGLE CHECKING SYSTEMS All Pneumatic and Electronic Systems can be connect with PC for SPC  

Custom designed high transport rate, efficient pneumatic conveying systems for wide range of applications & to handle variety of materials. Compact, economical, dust free & closed operation. Design Configuration Lean phase low pressure/vacuum typeLean phase medium pressure/vacuum typeDense phase high pressure

Pneumatic Conveying System is a unique development for controlled line loading of dense-phase pneumatic conveying systems. Designed for long distance conveying with the highest line loading for economical use of conveying air and lowest feasible material velocity. Variable line loading is achieved with a an outlet Dome Valve that is modulating its open position from signals indicating pipeline back pressure. The Dome Valve modulation regulates the allowable line loading for maximum effect for the available conveying pressure. This method of line loading is essential for automatic self regulating conveying efficiency when conveying distances are long. The modulation process prevents high back pressure from line overloading and also prevents loss of efficiency when the line is too lightly loaded. This is a unique macawber development that has not been repeated by others. No pipeline boosters are required which are unnecessary for a controlled low material velocity through the pipeline and would upset the auto line loading.This saves further maintenance and the cost of running air lines to the booster connections. The system design and components are subject to continuous development and improvement for lower product cost and performance. Our firm has emerged as a leading manufacturer, supplier and exporter of superior quality array of Pneumatic Conveying Systems that is also referred as vacuum transfer system. This system is known for the process of RMG loading with inline sifting system. In addition to this the system is also used for blender loading with inline milling. Providing faster conveying of large volume, our offered systems are in great demand among the clients.

The provided solution is assured to be the best pneumatic conveying system solution for the application. Being the application experts & pneumatic conveying system manufacturer, we always assure to deliver best of both the worlds (commercial & technical worlds).

• Features: Rugged construction, Fully furnished ,Low maintenance Precisely designed, Top performance

We are the leading manufacturers, exporters and supplier of this products.

• Material: Stainless Steel
• Automation Grade: Automatic
• Capacity: 1-10 tph
• Brand: UK-2500
• Light Density: 800kg/m3
• Work Efficiency: 100.00%

For several decades Schrader has been engaged in offering Pneumatic systems for a wide section of  the Industry. Equipped with a highly qualified and experienced team and computer aided design tools, we undertake to provide automation solutions from design to execution.

• Country of Origin: Made In India

- PNUMATIC SERVO SSYTEM - For Educational Training

• Application: Industrial
• Condition: New
• Material: Metal
• Air consumption(m3/min): 6
• Length: 8-10 feet
• Conveying Pressure: up to 6 bar

With the assistance of our capacious warehouse, we are able to meet the bulk as well as urgent requirements of the buyers. Our unit is supervised by the experts ensuring complete safety of the lot. Raw materials used in the production of our entire range are sourced from the reliable providers present in the market. Due to this, we guarantee quality products at buyer's end.

• Brand Name: Indpro
• Capacity: 1 tph to 5 tph
• Voltage: 415 V
• Power: 3 hp to 10 hp
• Material: Stainless Steel
• Automation Grade: Automatic
• Country of Origin: Made in India
• Product Type: Pressure conveying system
• Usage/Application: Conveying Sticky Material
• Model Name/Number: Sweet Scrub

Pioneers in the industry, we offer Pneumatics such as FRL Combination (AC Series) and Filter Regulator ( AW Series ) from India. We “Abhishek Enterprises” situated at Faridabad (Haryana, India) have gained appreciation in the field of Manufacturing, Trading and Supplying high quality range of Digimatic Vernier Caliper, Dial Vernier Caliper, Mono Vernier Caliper, Height Gauge, Micrometer Screw Gauge, Water And Hose Pipe, Granite Surface Plate, Precision Bench Center, Magnetic Stand, Digital Portable Tester, Ball Bearing, Molybdenum Fastener, Air Compressor, Oil Mist Lubricator, Safety Product, etc.

» We are manufacturer of Three Way Accept Reject System that are widely used in forging industry.» The Accept Reject system is mounted at exit side of the induction coil in an induction heater.the purpose of this system is to ensure that proper temperature billets are reaching for forgings.» The system works with the feedback from the IR sensor( pyrometer ) which detect the temperature of the billets are send it to the controller .The controllers with the electro-pneumatically controlled solenoids valves ensure that proper temp billets are allowed to reach forger .» The LOW and HIGH predefined temperature billets are diverted after detection and are collected separately in bin.» This unit consist of fabricated structure and pneumatic actuators to reject the billets when it is under the desired temperature.  

We offer pneumatic conveying system, grain handling system, air pollution control systems. The pneumatic conveying system is a method of conveying dry material in a pipeline through air without any moving parts. The pneumatic conveying is necessarily custom made conveying system & based on product characteristics, particle size, throughput capacity, number of sources and number of destinations. Each pneumatic conveying system is designed & customized as per the application popularly known as custom conveyor system. The provided solution is assured to be the best pneumatic conveying system solution for the application. Being the application experts & pneumatic conveying system manufacturer, we always assure to deliver best of both the worlds (commercial & technical worlds). Dilute phase pressure conveying system: dilute phase is a suspension flows wherein the material to be conveyed is introduced into a moving air stream inside a pipeline. For the material to remain in suspension there is a minimum conveying velocity which varies for different materials. The quantity of material that is fed into an air stream is also dependent on material characteristics like bulk density, particle size, sieve analysis, frequency distribution etc. Generally, the material to air ratio varies between 3 to 10 kg of material to kg. Of air. Conveying velocities are in the range of 18 to 28 msec depending on the product characteristics. The dilute phase conveying system uses low-pressure air at pressures less than one bar in case of pressure conveying and (-) 5000 mm in case of vacuum convening, which is generated by positive displacement type roots blowers or by centrifugal blower.

• Automation Grade: Manual
• Condition: New
• Brand Name: padmatech
• Design: Standard

• Voltage: 280V
• Country of Origin: Made in India
• Brand Name: Castx
• Capacity: 250 LPH
• Automation Grade: Automatic
• Material: Mild Steel
• Surface Finish: Paint Coated
• Product Type: Pneumatic Conveying

We are listed at the apex in the list of the outstanding Conveying Soap Noodles Manufacturers in Pune, Maharashtra. The Soap Noodles/Bits/Strands Pneumatic Conveying Systems are lean phase of positive pressure system to any one of the silo selected. The unmatched quality and unsurpassable performance has attracted various national as well as international clients to place repeated orders for the Professional Soap Noodles.