Power Control Panel Dealers in Pune

• Brand Name: DOMAIN
• Material: 1.5/2mm MS with powder coating
• Color: Grey
• Country of Origin: India

All types of process control panels

• IP Rating: IP 42
• Phase: Three Phase
• Brand: PTC
• Display Type: Digital
• Power: 220-380 V
• Operating Voltage: -30 deg C to 120 deg C

• Surface Treatment: RAL 7035 Powder Coated
• Color: White
• Material: CRCA Powder Coated
• Brand Name: Superior Electrotech Enterprises
• Application: Power Factor Correction
• System Voltage: 415V

Automatic Power Factor Control or APFC Panels are mainly used for the improvement of Power Factor. Power Factor is the ratio of active power to apparent power and it is a major component in measuring electrical consumption. APFC is an automatic power factor control panel which is used to improve the power factor, whenever required, by switching ON and OFF the required capacitor bank units automatically. This is very strong and durable. It is very easy to operate. It is dust proof and has high tensile strength. It required low maintenance. This is also known as automatic power factor correction panels. This product is made of best quality of raw material. It is very eco-friendly. It is connected with electricity boards. This is widely used for installation purpose. It has micro controller switch. Degree of protection Up to IP-54 Inspection & Testing: Routine Test Control/Interlock Test HV Test Megger Test Continuity Test Mechanical endurance Test

• Size: Multisizes
• Type: Electric Control Panels
• Color: Grey
• Voltage: 110V, 220V
• Application: Boiler Control
• Material: ABS, Mild Steel
• Power: 1-3kw, 3-6kw
• Power Source: Battery, Electric
• Phase: Double Phase, Single Phase

The major concern of our organization is to provide only quality-approved products to the customers and thus we check each product at all stages. We are one of the respected names in the market of Pimpri-Chinchwad (India) and are offering amazing deals on our products.

We are manufacturer of wide range of both standard and custom engineered Thyristor/SCR power panels from 100W to 750KW. Thyristor control panels are extensively used in large and heavy industries that involve process where heaters are required. This panel is designed as per application and customer needs.SCR power control panels are engineered with safety and ease of installation in mind. The control panels are prewired and tested on name plate voltage. Customer needs only to install incoming power wires, outgoing heater wires and thermocouple input connections.Standard Features include : SCR Power Controller – Single or Three Phase; Phase Angle Fired or Zero Voltage Switched Powder coated enclosure. Fan cooled or air conditioned Input power circuit breaker or fused disconnect with door interlock Definite purpose power contactor in front of SCR Power On-Off Button Manual reset button Power on indication (lamp)

• Application: PLC Automation
• Color: Grey
• Cooling System: Air Cooling
• Warrenty: 1 Year
• Brand Name: Prratek
• MCB Count: TPN
• IP Rating: IP 55
• Material: Mild Steel

APFC Panels can effectively and automatically manage quickly changing and scattered loads along with the retention of high Power Factor. We are renowned manufacturers of APFC Panels symbolized with quality and reliability. These are available in different current ratings to cater to distinct applications.The main features of our control panels are : Maintains high Power Factor constantly High efficiency In-built independent fuses Protection from excess power in the system. Prevents leading Power Factor in low load conditions Clearly marked buttons and indicators Minimizes harmonic current Easy to use Corrosion-resistant Long lasting Electrical insulation Protects electrical equipments

• Phase: Three Phase
• Power: 415 V
• Power Source: Electric
• Frequency: 50/60 Hz

Here we are helping our customers with using of different electrical equipment according to application of machines, pumps. Some of our master products like, mcc panel, plc panel, vfd panel, spm panel.

Our product the Automatic Power Factor Control Panel is one of its kinds with its robust build and dimensionally corrects designs. These power factor control panels are corrosion resistant and are shock proof as well. Automatic power control panel (APFCP), accurately monitors the reactive power in power systems and thus saves electrical power and energy. They are equipped with capacitors with series reactors which minimize the harmonic current and alter the system voltage and current. Enclosed in high quality rust proof steel, the panels are durable.  Features : Fully AutomaticBased on programmable micro controller technologySelects capacitor banks through VAR sensing principleAutomatic scrolling of voltages and currents in three phase viz. KW, RKVA, KVA and PF through LCD displayLow and high voltage protection Applicable in : Water pumpsHeavy machineryIndustrial equipmentMedical & office equipmentAutomotive industry

PCCMCC panels are made up of 1416 SWG CRCA material semi bolted structure firmly supported. Ensures desired breaking capacities, temperature rise & IP protection. Enough Space for incoming & outgoing Cable termination. Outgoing terminals are stud type as standard practice. All starters are Type Two Co-ordinated. CT terminals, Cable Alley Illumination Lamp, Space Heaters with Thermostats are standard features of our Panel boards.

    Features   • Corrosion resistant • Optimally sized to accommodate multiple electric circuits • Longer service life • Electrically insulated panel construct • Facilitates electrical distribution and division • High durability   Product Details   • HT / LT / Synchronization Panels • Power Control Centre • Double Bus Bar panels • Motor Control Centers (Manual/ Intelligent) • HT Panels – 6.6/11/33KV • Distribution & Meter Boards • Automatic Capacitor panels (Conventional/Thyristor Based) • Captive Power Control, Synchronization & Load Management Panels with SCADA • Control Desks & Mimic panels • Control & Relay panels • Outdoor Feeder pillars • Drive panels • Bus Ducts

We provide Power cum Motor Control Centre (PMCC) Panels for various applications, Our range of Power cum Motor Control Centre (PMCC) Panel is used to distribute the power through the panels. It is then distributed to the different motor loads located at various parts of the factory system. Further, it is transferred from one place through the motor starter fitted in the panel of required rating with full protection. Moreover, the motors can be started form remote positions as well. 

We are one of the eminent names, engaged in providing an array of Power Control Panels ( PCC ) Panels. Based on cutting edge technologies, this electrical control panel increases centralized control & maximizes safety for both the manufacturing process equipment and the workers. Our offered range is designed in conformation with international quality standards. Trouble free performance, sturdy construction, Less maintenance and longer service life are some of the highlighting features of our offered range. Our PCC panels, which are used for diverse industrial applications. These are used to supervise and control the voltage and reactive power of the power system. These panels are made of quality raw material and are extremely sturdy in construction. Some of the Salient Features : Corrosion resistance Shock proof Robust construction Sturdy Dust free High performance

We are offering control panels. we manufacture and distribute the highest quality electric control panels which are made using best quality raw materials and modern machinery, following international quality norms to ensure customer satisfaction. These are designed and manufactured to order. application: chemical feed pump systems pneumatic pump controllers environmental remediation systems vapour extraction controls drying systems control honing machine control panel band saw machine panels process control systems transfer pump control lift stations groundwater treatment systems wastewater treatment systems

• Usage/Application: Industrial Purpose
• Phase: Three Phase
• Material: Sheet metal
• IP Rating: IP33
• Brand: PS
• Output Current: 1600 A
• Output Frequency: 50 Hz
• Input voltage: 380 V
• Features: Excellent in appearance, Provides protection to the generator, Low maintenance

• Frequency: 50 Hz
• Phase: 3Phase
• Condition: New
• Usage/Application: Chemical Industry, Cement Plant, Sugar Plant, Textile, Industrial
• Capacity: 4500KVA
• Power Source: 220 / 400 V 3PHase

• Phase: Three Phase
• Rated Voltage: 415 V
• Rated Current: Upto 6300 Amps
• Automation Grade: Manual
• Type of Control Panel: Liquid Manufacturing Unit Control Panel
• Mount Type: Free Standing

• Phase: 1 - Phase
• Material: Stainless Steel
• Frequency Range: 50-60 Hz
• Surface Treatment: Hot Rolled
• Shape: Rectangular

We manufacture and distribute the highest quality Electric Control Panels which are made using best quality raw materials and modern machinery, following international quality norms to ensure customer satisfaction. These are designed and manufactured to order. Application: Chemical Feed Pump Systems Pneumatic Pump Controllers Environmental Remediation Systems Vapour Extraction Controls Drying Systems Control Honing Machine Control Panel Band Saw machine panels Process Control Systems Transfer Pump Control Lift Stations Groundwater Treatment Systems Wastewater Treatment Systems.

APFC or Automatic Power Factor Control Panels are mainly used for the improvement of Power Factor. It has a microcontroller based programmable controller which switches the capacitor banks of suitable capacity automatically in multiple stages by directly reading the reactive load (RKVA) which works in the principle of VAR sensing tends to maintain the PF to 0.99 Lag. The capacitor banks may be selected in number of stages according to the load pattern. The power factor can be maintained by installing Automatic Power Factor Control Panel (APFC Panel)

• Phase: Three Phase, Also available in Single Phase
• Material: Mild Steel, Also available in SS
• IP Rating: IP55, Also available in IP65
• Power: 6000 Amp

Electric Control Panel

Electric Control Panels

• Control Panels with relay Logic: Control panels with PLC

We design and manufactures the Control panels with PLC and Relay Logic.

We are leading supplier of huge range of control panel