Power Modules Dealers in Pune

Technical Specifications I) Suitable for 6Amps 10Amps 25Amps power supplies ii) Input max: 100VDC iii) DIN rail mountable IV) 1000VDC PIV v) Power supply ON indications Applications To use power supply redundancy in control system

Best roll up time in Industry: 10 seconds » Universal Window Closing Module » Window rolls up automatically one by one

• No. Of Channels: 8
• No. Of Contacts: 1 C/O
• Coil Voltage: DC : 12V, 24V
• Coil Looping: Nigative, Positive, Isolated
• Dim ensions: 55 x 102 x 115mm

• Type: Power Supply Module

breadboard power supply module, compatible with 5v, 3.3v. apply to mb102 breadboard input voltage: 6.5-12 v (dc) or usb power supply output voltage: 3.3v/5v can switch over maximum output current:

• Input max: 100VDC
• Applications: To use power supply redundancy in control system

Redundant module for power supply: This module enables user to make redundant power supply in a control system. The module is available in 3 varieties viz. 6Amps, 10 Amps and 25 Amps. Two power supplies are connected in parallel. Initially any one of the two works for the control system and second power supply is standby. When the working power supply fails then standby power supply starts working. Healthy indications of both power supplies are on the module.

• Brand Name: UL
• Model Number: UL04-FFTDU-ALM
• Current: 120 Amp
• Frequency: 50 hz
• Material: ABS

• Brand Name: Semikron, Powrex, Mitsubishi, Fuji
• Voltage: 10v to 100v
• Current Rating: 10amp to 90amp
• Minimum Order Quantity: 3 Piece

• Brand Name: UL Automation
• Material: PCB
• Application: Power Supply Distribution
• Country of Origin: Made In India
• Protection: Fuse with LED
• Primary Voltage: 24VDC
• No of chanell: 04/08/16

• Application: Industrial
• Material: Metal
• Durability: Long Life
• Surface Finishing: Polished
• Resistivity: Rust Resistant
• Drive Type: Electric

We offer thyristor controlled power modules. Our clients can avail from us shreetech instrumentation that provide customized thyristor-controlled power modules for 1-ph and 3-ph resistive load control. These thyristors offer optimum protection against ‘over load & short circuit' and ‘heater break monitor'. We ensure that these modules are in open execution for adopting in the main control panel. We are on of the leading Supplier of Thyristor Heater Controller with following features:. Thyristor heater power controller for 1& 3 phase, phase angle controller Rating 200 amps. Input2. Input 230v. +/- 10%, 50 hz Output 0 – 95% Input control 4-20 ma. Signal by external process. 0-10 v. Dc signal by external process. Controller details out put voltage proportional to input control signal by phase angle control of thyristors.

• Brand Name: Nivelco
• Nominal Input Current Range: 1-22 mA
• Accuracy Of Switching Level: +- 0.1 mA
• Discontinuity Threshold: 3.7 mA
• Input Impedance: 10 Ohm
• Switching Delay: 0.1 s; 1 s; 2 s; 5 s (Selectable)

Power Modules PM240-2 : PM240-2 Power Modules have a braking chopper (four-quadrant applications) and are suitable for a large number of applications in general machinery construction. Power Modules PM250 : PM250 Power Modules are suitable for the same applications as the PM240 Power Modules. Any braking energy is directly fed back into the line supply (four quadrant applications - a braking chopper is not required).

• Current: 3W
• Brand Name: HI-LINK
• Model Name/Number: HLK-PM01
• Frequency: 50-60Hz
• I Deal In: New Only

• Available for the frequency of your choice: 2.4 GHz,915 / 868 / 865-867 / 433 MHz etc.: Connect to various ports such as TTL / RS232 /RS485 / USB.
• Remote firmware upgrade.: Supports data concentrator (DCU), hand held unit (HHU), cloud based software.

We are offering low power rf modules. Wiart- series of low power rf modules- make your wired solution wireless! (lprf) modules enable you to convert your conventional wired solutions into wireless. Wiart modules are available for global ism frequencies of sub-1 ghz and 2.4 ghz and are based on texas instruments low power radio frequency solutions. Wiart is a right choice for low cost, easy to integrate, reliable wireless solution to achieve quick time to market. Benefits: 1. Eliminate existing wires for rs232, rs485,usb, ethernet, optical fiber or any other. 2. Plug-n-play. No change in your firmware software. 3. Plug the modules at both ends and you are ready to go. 4. Transparent mode for your multi-drop connections such as rs485. 5. Point-to-point range of 600 meters. 6. Supports multiple hops. 7. Customized high performance data transfer option using your native protocol. 8. In-built repeater functionality to extend the effective range to several kilometers. application- your industry our presence 1. Smart metering 2. Lighting control 3. Home automation 4.building management system 5. Parking management system 6. Industrial automation 7. Renewable energy monitoring application 8. Asset monitoring 9. Wireless public address system- pa system

LED Power Module, Smd Led Module, Fm Radio, Led Panel Light, pcb module

sic Power MOSFET Module, Electronic Components, Reed Switches

Power Relay Module, Single Output Battery Charger with DPM

Power Modules, audio video warning devices, electronic systems