Pressure Valve Dealers in Pimpri Chinchwad, Pune

• Material: Casting
• Color: Blue
• Type: Pressure Safety Valves
• Application: Gas Fitting
• Feature: Durable, Non Breakable

Safety or PRV -Pressure Release Valves are used at outlet of blower as a safety measure. When outlet passage of air is blocked or subjected to heavy load then system pressure increases creating back pressure on lobes. Which results in failure of lobes or tripping of Motor. PRV release the pressure to the atmosphere at certain set point to safeguard the compressor/blower system. When they used at suction/inlet they termed as vacuum safety valve. We provide range of PRV /safety valve and vacuum valve as per requirements and in different mounting sizes.They are factory set and tested for required pressure set point. MOC- CI, Brass. Type- Spring Loaded.

It can also be advantageously used for most other applications on gases vapours, liquids and saturated steam systems involving small discharge capacities. The SRV12 Series valves are specially designed for steam but can be used on, liquids and gas as well. The valves are designed as per API 526 and meet the requirements of ASME Sec VIII-Division. SRV12 Valves are offered with IBR Certification Form III-C. The valves have a solid nozzle screwed into the valve body and is fully guided at the upper section of the valve body, increasing the strength of the valve assembly. Specially designed disc holder ensures full lift within 5% increase of pressure above the set pressure value. i.e. Over-pressure of maximum 5%. Blowdown of a maximum of 5% is achieved in this design. Superior lapping of the seat area ensures a high level of leak tightness at seat. Disc lifts above 14 of nozzle diameter which ensures that the certified flow of the safety valve is discharged. The Spring is selected and assembled with great care so that the valve operates precisely and a good leak tightness is achieved.

Sizes: 65NB, 80NB and 100NB Flow from 100 to 1800 LPM (26 to 476 GPM) Carbon Steel or Stainless Steel material Working pressure 2.8 to 7 Bar (40 to 100 PSI) Epoxy painted from inside and outside Supplied with Stainless Steel orifice plate Frangible glass vapour seal Solid or split deflector UL Listed

• Size: 40 x 50 NB,50 x 80 NB,80 x 100 NB,100 x 150 NB,150 NB 
• Material: Cast Steel Body (WCB) With SS Internal
• Brand Name: Mahavas Precision
• Larger Sizes: Available on Request.
• Min. Working Pr.: 0.5 Kg / Cm2
• Max Working Pr.: 35 Kg / Cm2
• Max. Working Temp.: 399 C

• accuracy: +/- 0.2 bar
• Turndown: 15:1 to 12:1

Steam boilers are usually designed to work at high pressures. Working them at lower pressures can result in carry over of water.Steam at high pressure has a lower specific volume which means that a greater weight can be carried by a pipe of a given size. We recommend distribution of steam at high pressure and reduction at the point of usage. This reduces capital loss for piping and insulation and also reduces distribution losses.Steam pressure may be reduced to save energy. Steam at lower pressures has higher latent heat. Reduced pressure of steam also leads to reduced heat loss and lower flash steam formation from open vents etc.

Steam boilers are usually designed to work at high pressures. Working them at lower pressures can result in carry over of water.

• Media: Gas, Fuel, Water
• Material: Brass/Bronze
• Application: Residential, Industrial, Commercial
• Country of Origin: Made in India
• Body Material: Brass
• Brand: DRP

Control Valve High Pressure, Flow Control Valve, Power Pack, Piston Pump

Fittings, Water Meter, Sanitary Ware, Toughened Glasses, GI Pipes, MS Pipes

pressure reducer valves, Ball Valves, Globe Type Needle Valve

PRESSURE BUILD Valve, Ball Valve, Check Valves, Globe Valves

Pressure Reducing Valve, Ball Valves, Round Body Pneumatic Cylinders

High Pressure Globe Diaphragm Valves, Pneumatic Fittings & Tubings

upstream pressure control valves, Transmission Distribution Skids