Process Control Equipment Dealers in Midc, Pune

Serving the customers needs with excellence, we are engaged in offering Programmable Logic Controller. We offer a supreme range of varieties. It is made of top-notch raw material. Its high performance, precise design and durability make it an appealing proposition for the customers. The Forbes Marshall Microcon+ distributed control system is tailor made and designed keeping in mind the requirements of today's control system user. For our respected customers, we make it available at easy on the pocket-friendly rates. Its multifunction features make the system ideal for applications in a variety of industries such as chemical, pharmaceutical, food and beverage, power, petrochemical, metallurgical, cement, glass, paper and pulp, water supply and treatment, sugar, distillery and many more.

• Voltage: 415V

We have attained a notable position in the market by offering the finest quality array of Fully Automatic Water Level Controller.Range: 0-3m, 3.1-5m, 5.1-8m.

This instrument controls speed/torque of the engine remotely. Two remote operating stations are provided. One station is on the instrument front face with two pairs of push buttons, Of which one pair is for Continuous Rotation in Forward or Reverse direction and second is for Inching in Forward or Reverse direction. Second station is a toggle switch with centre off position situated on the motor unit for Continuous Rotation in Forward or Reverse direction. This facility offers great convenience to the operator to set initial position of the safety link at engine idle speed. A safety link is used to hold the throttle lever securely at full throttle position.       DIMENSIONS & SPECIFICATIONS Size : 2U DIN Standard 19" Rack system Depth Max 16"(406mm) Electrical Input : 220 VAC, Single phase, 50 Hz, approx.30 W Electrical Output : To drive 12V DC motor Throttle Drive through Link Mechanism with built in safety unit is provided with the equipment. Two modes of operation are provided viz. Manual (MAN) and Automatic (AUTO). Computer interfacing signals are provided at the back side of the instrument in D shell connectors.   MODES OF OPERATION Two remote operating stations are provided From panel front face through push button controls, following direction control is available. Fast Forward Fast Reverse Inch Forward Inch Reverse Toggle switch facility with a fast reverse and forward direction control on the motor unit is provided for operator convenience.

• Operating Temp: : 0° - 55°C
• Supply Voltage: 230 VAC + 10%, 50 Hz.

DIGITAL TEMP CONTROLLER Range: Standard ranges suitable for RTDThermocouple Inputs. RTDThermocouple. Set Point: Single, Two and Three.

We are manufacturers of Microprocessor / PLC Based Automation Systems. They are designed as per customers’ requirement.We have made one fire fighting system using PLC and MIMIC Panel. The Two PLC Panel with 204 I/O Points and 64     I/O Point are hooked up to PC via RS 485 Serial Communication. The MIMIC is also displayed on PC Screen.Microprocessor Based System is used to Communicate with PC through wireless network. In this case 35 Microprocessor Units are interfacing with PC, simultaneously.Microprocessor Control Relay Panel is interfaced to PC to indicate Breaker/Motor ON/OFF Status. The Single Line     Diagram is displayed on PC Screen.Different Microprocessor Units include Wind Mill Controller, Angle Measurement for Radar Antennae Positions, Product     Counters, Bar Code Scanners.

• Size: 96x48
• Application: Industrial
• Accuracy: +/- 0.1%
• Type: Automatic
• Application: Heating Solution
• Condition: New
• Fluid: Normal Water

• Type: Walk Through
• Certification: CE Certified
• Color: Grey
• Voltage: 220V
• Power Source: Electric
• Warranty: 1 Year

Features : No touching body temperature measuring Group people pass without stop Sound and light alarm for high temperature person Data management system to have records Easy operation for any junior operators. Easy movement and installations for any public places

We are working with a group of professionals who make special emphasis on the products packaging and ensure that the material is procured from the reliable sources only. In order to ensure product compliance with stated quality norms, we conduct several tests at several stages.   Details : Power ON LED : It indicates the power supply to the unit. Motor ON LED: It indicates the motor ON and Off Condition Tank Level Indication LED: Two level visual indications – 25% (Low Level), 75% (Tank full level). Motor will automatically switch ON when the water level in the tank is low and automatically switch OFF within 1 second when the tank becomes full.   Manual Mode: Helps to switch ON the motor manually. In this mode, the motor will be running till the tank will be full . The product having special features of two relays for submersible Pump. one for starting capacitor and other for running capacitor. The three sensor electrode indicates the water level of the tank. Helps in preventing overflow of water from the overhead tank Input Voltage- 230V to 275 V(AC) Output Contacts-2 NO  Long Life Easy to install Application: Automatic Microcontroller Based Water Level Controller is of much used in metro cities, bungalows, industries, hospitals and in luxurious apartments and homes. Use of this product saves water, saves electricity and saves time. Useful in case of bore well to tank set up. Booster Pump Control Panels Textile Machineries Garment Machineries Water Distribution Pumps House Submersible Pump Control Panel Package Boiler in Sugar Factory Heat Exchanger Steam Generators     Advanced Microcontroller Based Water Level Controller (Auto Change Over)   Dual pump operation.   Control Sump (open well) pump as well as Bore well pump with automatic changeover technology   To suit where both the motors are used to pump water to Common overhead tank (Single Tank)   Three modes of operation.      OpenWell (sump) mode      Bore well mode.   Automatic Change Over Mode (Dual Mode) Four stage water level indicator for over head tank, Three stage water level of sump Water flow indication(Running Line), Over and under voltage level indication and protection By Pass facility in case for direct operation. Manual Soft Touch ON / OFF Support both Single Phase & Three Phase connection Easy integration with control panel Basic Microcontroller Based Water Level Controller  - WLC-01Single tank - 2 level control relay   Indications – Empty Full Motor ON/OFF Control Switches Auto/ Manual Switch Relays 2 relay output. Relay Rating - 10A at 240V Sensors 3 Sensor stainless steel PVC coated Protection Type  Dryrun   Compatibility : Single phase starter panel Compatible Three phase starter panel Compatible   Microcontroller Based Water Level Controller for Upper Tank and Lower Tank (SUMP) - WLC-02   Dual tank - 2 level control relay   Indications –   Empty Over Head Tank   Full Over Head Tank   Empty Sump   Motor ON/OFF   Control Switches   Auto/ Manual Switch   Relays   2 relay output.   Relay Rating - 10A at 240V   Sensors   4 Sensor stainless steel PVC coated   Protection Type   Dryrun   Compatibility   Single phase starter panel Compatible   Three phase starter panel Compatible Online Microcontroller Based Water Level Controller - WLC-03   Dual tank - 2 level control relay   Indications –   Empty Over Head Tank   Full Over Head Tank   Empty Sump   Motor ON/OFF   Control Switches   Auto/ Manual Switch   Relays   2 relay output.   Relay Rating - 10A at 240V   Sensors   4 Sensor stainless steel PVC coated   Protection Type   Dryrun   Compatibility  Single phase starter panel Compatible Three phase starter panel Compatible Basic Microcontroller Based Water Level Controller Reverse Type- WLC-04Single tank - 2 level control relay When tanks gets full pump gets ON to siphon the water out of the tank and then tanks gets empty pumps gets OFFIndications –   Empty   Full   Motor ON/OFF   Control Switches   Auto/ Manual Switch   Relays   2 relay output.   Relay Rating - 10A at 240V   Sensors   3 Sensor stainless steel PVC coated   Protection Type   Dryrun   Compatibility   Single phase starter panel Compatible   Three phase starter panel Compatible

• Type: Hot Runner Controller
• Color: Blue
• Application: Molding Injections
• Automatic Grade: Automatic
• Power: 1-3kw
• Driven Type: Electric
• Warranty: 1year

 To cope up with the emerging needs of our global clients, we put at their disposal, the world-class Hot Runner Controllers at feasible prices. Fetched from the best sources in the industry, these Hot Runner Controllers are based on advanced microprocessor-controlled technology. The Built-in boost, Standby modes, simple designing and accurate functioning are their few standout characteristics. Also, the soft-start feature helps to remove unwanted moisture from the heater.

• Voltage: 24 V DC, 12 V DC, 230 AC
• Power Source: Electricity
• IP Rating: IP 65
• Material: Stainless Steel
• Surface treatment: Color Plated
• Production Capacity: 2000 Per Month

Features : Auto cutoff on wide fluctuations in input power Cable less corridor synchronizing facility Non volatile data memory   Functions : 24 cycle plans 1 special day plans 24 signal split (max) per cycle Accuracy of system clock: +/- 0. 5 sec per month 4 day plans 20 holiday plan 32 cycle switching (max) a day   Mode of operation : Auto/manual Signal/flash

• Input Supply: 230V AC Sensor
• Input: From Magnetic Float Switch or Cable Float Switch
• Output: 1NO contact rated fro 230V AC, 5A
• Mounting: Back panel 35mm din rail mounting
• Mode: Pump UP ( Filling ) or PUMP Down ( Emptying)
• Electronics Housing: Stainless Steel or die cast aluminium, flame proof
• Temperature: 0 to 65 deg C
• Atmospheric: Atmospheric
• Mounting flange: Liquids including hazardous but non-corrosive medium
• Input Supply: 12V/24 V DC
• Analog output (Programmable): 4 – 20mA, 20 – 4 mA 3) 0 – 20mA 4) 20 – 0 mA
• Mode: Distance OR height measurement
• Screen: 8 x 2 alphanumeric display, green or blue screen
• Communication: RS 485 – Modbus
• Measuring range: 1) 5m 2) 10m
• Resolution: 5mm or 10 mm depending on models
• Accuracy: 0.5% of FSD
• Updation time: 150 mS max
• Minimum distance: 300 mm
• Display Filter: None / Low / Medium / High
• Temperature compensation: Inbuilt
• Voltage Variations: Internal Calibration and Automatic Compensation
• Process Connections: 3 Inch Flange, Threaded Lock Nut – Customised
• Electrical Connections: PG 9 one gland, 2 numbers
• Sensor face: Anodised aluminium
• Sensor body: PVC

• Voltage: 48V DC
• Item Code: CIC
• Brand: CURTIS CONTROLLER
• Model No.: 1232E
• Current: 400A
• Mounting Type: Panel Mount
• Casing Material: ALLUNMINIUM
• Size/Dimension: ALL STANDARD
• Usage/Application: FORKLIFT SPARE PARTS
•  :  

These are suitable for conductive liquids like water and for non-conductive liquids like Diesel/Oil. Models for either one level monitoring or two level monitoring. Feature: Can be used for potable water, water with impurities and for diesel/oil, Cable size & length no restriction for water level monitoring, Suitable for variety of electrodes, Optical sensing for diesel/oil level monitoring. Functions: Level monitoring of conductive and non-conductive liquids, One level or two level monitoring, One tank or two tank level monitoring

• Type: Plc Splitters
• Material: Copper, Porcelain, Silicone Rubber
• Certification: CE Certified
• Application: Automotive Industry, Electricals, Electronic Device
• Color: Available in Many Colors
• Frequency: 50Hz

Purchasers can order our goods in wholesale, as we ensure year around obtainability. In addition, we have dependable shipping network to ensure timely distribution. Owing to immense experience in this domain, we became efficient in providing quality PLC Omron.

• Brand Name: Toshiba
• Usage: Industrial
• Capacity (In Tons): 60LPM
• Models: LT150i, LT150, LT200

MOULD TEMPERATURE CONTROL UNIT, 90 deg c with water,150 deg c with oil.Heat Transfer Unit Water/Oil.Insulated Sealed Tank.PID Based Temperature Control.Leak Stop Feature.

We are engaged in manufacturing and supplying an extensive range of PLC Based Automation System. The offered automation system is manufactured using finest quality raw material and advanced technology at par with the set standards of quality. Acknowledged for its durability, robust construction, low maintenance and longer working life, this authentically configured system is well-checked by our quality controllers on various parameters. We provide this system to our clients in diverse specifications at market leading prices.

With support of our excellent team workers, we have been delivering the best quality range of CNC Machine Controller. Our offered controller is used for controlling motion of work piece or tool in various machines. This controller finds its application in industrial machines such as lathe, drilling, tube bending, sheet metal pressing, laser, etc. Our offered controller is made available in different technical specifications with user-friendly interface for our clients.Features :High accuracySave timeReduce human error

• Brand: Radix
• Model No.: CS48
• Control Accuracy (ONOFF): +/- 1% of full scale
• Proportional Band: +/-3 deg C centred at set point
• Proportional Cycle Time Output: 25 sec 1 x relay changeover contacts
• Relay Contact Rating: 6A/230 V AC, resistive
• Ambient Operating Temperature: 45 deg C
• Supply Voltage: 230 V AC +/- 10%, 50 hz
• Iron / Constantan (J): 400 deg C
• Features: J, K thermocouple or Pt100 input,Time-proportioning or ON-OFF control,5-LED solid state deviation indicator

Universal input configurable from faceplate  Accuracy better than 0.2% f.s. under nominal conditions  Control output: relay, logic, Triac or continuous  Hot/cold function with selection of cooling fluid  3 alarms with completely configurable function  Isolated digital input with configurable function  Analog retransmission output   The model 556 is configurable for many different functions and is designed for reliability in industrial environments. The double display and minimum size make it the ideal choice for every requirement for a timer, counter or frequency meter. The display can be expressed in the engineering units of the count effected using one of the five prescaler ranges. As a timer, it has six scale ranges from hundredths of a second to hours and minutes.

Variable Voltage Digital controler for vibratory Feeder LED Digital Display Soft Startup ONOFF Control ONOFF Delay

We are offering traffic signal controller. Description specification of traffic signal controller we are offering to our valued customers a fine range of traffic signal controller. The traffic signal controllers offered by us is a microprocessor based fixed time controllers operating on per-computed signal plans from a series of historical and current data complied manually with different features : • auto cutoff on wide fluctuations in input power • cable less corridor synchronizing facility • non volatile data memory specifications functional • 4 days plans • comfortable fitting • 1 special day plans • 20 holiday plan • 24 signal split (max) per cycle • 32 cycle switching (max) a day • traffic control systems • automanual • signalflash

We are offering level controller. Its a water level controller and very useful to make on-off motor thorugh our controller

Product Details: Valve mounted, Compact and simple pressure control system Output air pressure upto 3 Kg/Cm2 hence valve positioner not required Can be used directly for pressure reduction or as overflow system. No additional instruments required Totally mechanical, very easy to maintain in-house No electronics, hence not affected by ambient temperature All materials includes sensing bellow are cast AL and SS hence corrosion resistant Can be used with any control valves with any Pneumatic Actuator Very little air consumption

Our organization hold expertise in providing superior grade PLC Mitsubishi FX 1N,FX 2N,FX 3U,FX 3G,Q PLC Brand Name: Mitsubishi    Our organization hold expertise in providing superior grade PLC Programmable Logic Controllers as well as HMI's (Mitsubishi PLC /HMI GOT 1020/1030/1030LBD2/GT1672/GT1675 ) to our precious customers. Our offered PLC is widely appreciated by our customers, which are situated all round the nation. Known for its best quality, clients can avail this Programmable Logic Controller at industry leading prices from us.Q

Features : • Capacitance type, IP-65 ABS probe• Duct, Wall & Surface mounting• With & Without Display• Operating temperature : 50 to +200oC• Out put : 4-20mA or 0-1V DC• Standard ranges : Temp. -40 to +60oC, 0 to 50oC &   -50 to +200oC• Humidity : 0 to 100% Rh• Supply : 24V DC• Accuracy : ± 1oC & 1.5% Rh

Process Control Instruments, Proximity Switches

• Voltage: 24 V DC, 230 V AC
• Usage/Application: Traffic Light Controller
• Brand Name: Trafitronics
• Operating Temperature: 0 to 55 Degree C
• Cabinet Material: MS with Powder Coated
• Accuracy of System Clock: +/- 0. 5 sec per month