Process Indicator Dealers in Pune

• Display Type: Digital
• Frequency: 50 - 60 Hz
• Humidity (%): 35-85% RH
• Ambient Temperature: 0-50 Degree C
• Rated Voltage: 230 V AC
• Rated Current: 5 Amp
• Timer Type: Digital
• Automatic Grade: Automatic

The PI - 100 D series is a compact sized Process Indicator, designed to accept input from any two wire or four wire Transmitter. It has a seven segment, ½”, bright LED Display to read the Process Value in terms of Engineering Units or percent as is desired. The alarms can be set anywhere from 0% to 100 % with both High or both Low or one High and one Low configuration. The Output , 4-20 mA proportional to PV is isolated from input and power connections   ADVANTAGES : • Compact in Size • Field Programmable Parameters. • Linear/ Square Root operation programmable. • 4 Digit Display available to monitor Process parameter • Value from -9999 to 9999. • Isolated 4-20mAD.C. output proportional to Process Variable. Process Indicator with Alarms, PI-100 series • Adjustable Two Alarm Settings with various options of Operation. • Transmitter Supply 24 Vdc suitable for • 2 wire as well as 4 wire Transmitter.   • Serial Interface with Computer through MODBUS RTU.

• Brand Name: GIC
• Color: Black
• Automatic Grade: Automatic
• Power Supply: 85-270V AC/DC
• Display Type: Digital
• Type: Process Indicator
• Country of Origin: India
• RS485 Communication: NA
•  Alarm Output: NA
• Analog Input: NA

• Input : Electrical, RTD ( Pt - 100 ) or Thermocouple
• Transmitter Supply : 24 VDC
• Output : 0/4-20 mA or 0-10 VDC Optional ( isolated )
• Indication : 4, 5, 6 digit LED Display as required
•  : 16x2 LCD with back light
• Power Supply : 230/110 VAC, 24 VDC
• Accuracy : Better than ± 0.2 % of FS
• Alarms : 1/2/3 Nos.
• Interface : RS 485 / MODBUS RTU / ASCII
• Mounting : Panel / field

• Features: Top in work,Excellent functionality,Impeccable finish,Dimensional accuracy,Precise design

We are offering process indicator. Protocontrol offers process indicator - controller type pi 350 ls specially developed for large process industries. This indicator displays are suitable for process parameters like flow, temperature, level, speed, ph etc. It accepts signal from field sensors and transmitters. The i/p can be 4- 20 m a, mv or any other. The indication is in the form of 0 - 100 % or any other engineering unit like rpm , pressure in bars, m / min , liters / min, amp, tons. Etc. Alarm and trip outputs are also available if some control action is required. Setting is done with a potentiometer, for this set parameter is indicated when push button is pressed. specification: supply voltage: 230 v ac, 50 hz, input : to be specified while ordering. i/ p: 4- 20 m a, 0 - 10 v dc, m v or resistance. display size : 1/ 2 inch, 1 inch, 2 inch or 4 inch or any other output : 0 -100 % or any other engineering unit setting facility : optional, 1 set point, 2 set point, out put contact: 1 c/o relay contact, 5 amp rating enclosure : front panel mounting / wall mounting

Specifications:- Input:- Thermocouples Pt-100(RTD) Range:- As per application. Indication:- Seven segment LED 3.5 digit 2″ Big Display. Accuracy:- ±0.5% of FSD Operating Temperature:- 0°c to 50°c Supply:- 230VAC 24VDC ±10% Interface:- RS232 Interface. Size:- 280mm×230mm×45mm (W×H×D)

  PROCESS INDICATORS Series µCS 2000 Features Microcontroller based fully programmable Universal Input Available with large display sizes Upto two programmable set-points Isolated Retransmission Built-in two-wire transmitter supply Field Calibration from front key pad Built-in square root extraction Various Cutouts and sizes Single Chip design for ruggedness and low cost

Universal Input Process Indicators PC Communication – RS232 / RS485 MODBUS RTU Protocol(Optional) Available in 3 / 4 / 5 digits 3” / 0.5”/ 1”/ 2”/ 4” 7 – segment RED display Accuracy better than ± 0.25% FSD 24V DC Transmitter Power Supply Retransmission output (Optional) 2 / 4 programmable Alarm contacts Fully configurable through front keypad

Electronet Series DPC-100 is Universal Input Process Indicator / Controller specially designed for various industrial applications.These can be used for monitoring and controlling parameters like Temperature, Humidity, Pressure, Flow,speed, Level etc. The measuring range and control points are settable through the keypad on front fascia and control output is available at the rear terminals. Retransmission output and communication port are additive features of DPC-100.

DPC 965M is 7 segment LED, 5 digit process value with 1/2 inch Display Size.It is intended to be used for indication and control application. Digital Indicator Controller accepts commonly used signal in process industry or 0 to 10VDC or RTD Pt100. In case of other inputs we can provide appropriate converters. Serial port RS 485 with MODBUS RTU protocol gives the user facility to connect the unit on all standard SCADA and DCS. 4-20mA Retransmission output for remote display or PLC can be provided for 4-20mA input type. 2 / 4 relays outputs are available. Ideal for SCADA applications.  

• INPUT: PMOO, T/C (J,K,R,S),mA, mV Volts.
• Supply: Volts. 240VAC, +/-10%50Hz 110VAC, +/-10%50Hz 24VDC +/- 10%-optional
• RANGE: 200 to +600 °C» PMOO 0 to 600 °C - J type Oto1200°C -Ktype Oto1600°C -R.Stype User Specified - mV,mA
• ACCURACY: User Specified - mV,mA, V +/- 0.25% of FULL SCALE with EPROM LINEARISATION 0.5 % of F.S.
• INDICATION: 3 1/2 digit RED LED display 0.5' height,for process &set values

Three wire lead resistance compensation &cold junction compensation - Built -in. Drift free performance. Front panel access of ZERO, SPAN. Power supply for powering 2W transmitter available - optional. Retrasmission output - available - optional Linearisation - Built-in. DIGITAL PROCESS INDICATORS are designed to display the process value like temp., pressure, flow, pH etc. These instruments accept 0/4 - 20 mA or 0/1 - 5 V DC sigals from transmitters as well as direct signals form temperature sensors. The Zero, Span adjustments are accessible from front panal. The process indicators employs state-of-the-art technology. The design having highly stable constant current source & reference supply , With very low temperature drift. The rugged DIN standard box with 2.5 mm2 screw type terminals for electrical connections are the added features.   COLD JUNCTION COMPENSATION Built-in. OPERATING TEMP OPERATING HUMIDITY 10 to 50 0C 90% Rh N. C. max. DIMENSIONS 48X96X175mm 96X96X175mm or 96X96X100mm 72X72X100 mm 72X144X175 mm CUTOUT 92X46 mm, 68X68 mm, 92X92 mm MOUNTING WEIGHT MODEL Panal Mounting 1.5Kg approx. 101- 31/2 digit LED display 102-41/2 digit LED display 101R-PMOO input 101M-T/C input 101V-Voltage input 102R- PMOO input 102M- T/C input 102C- 0/4 to 20mA input   FEATURES 31/2 digit & 41/2 digit 0.5" height 7 segment RED Display. Built-in Cold Junction compensation & three wire lead resistance compensation. Linearisation for PMOO & T/Cs. Accuracy +/- 0.2 % of F. S. typical. Front panel access of zero, span power supply for powering 2 wire transmitters available-optional. Rugged DIN standard enclosure.    

• Type: Process Indicator
• Application: Industrial
• Color: Black, Blue, Gray, Brown, Red, Pink
• Pattern: Plain
• Display Type: Digital
• Driven Type: Electric
• Voltage: 220V,230V

Programmable Process Indicator, three phase energy meter

One of the best leading supplier of process indicators

digital process indicators, audio generators, audiometers

Process Indicator, Electric Switches, Relay, Electrical Equipment, Sensors

Process Indicators, Strip Chart Recorders, Differential Pressure Transmitters

Programmable Process Indicator and Controller, Programmable Preset Timer