Rear Shock Dealers in Pune

Rubber grommets are used to protect or cover through holes. They help eliminate sharp edges so your wires are protected and add aesthetic value to your application. Automobile Industry are designed to increase operating life and improve performance. The Industrial Grommets are available in all range of material and configurations, 

• Color: Green
• Feature: Easy Of Transfer., Endotoxin Tested, Flexible Tip
• Material: PVC
• Type: Central Venous
• Length: 8 - 9 Inch
• Usage: Hospital
• Tube Diameter: 5 - 8 mm

• Material: Metal
• Thickness: 0-5mm
• Application: Engine Fittings
• Color: Black
• Feature: Durable
• Model: 4079(LH+RH)

We are instrumental in providing high quality KMS Shock Absorbers to the clients. Designed to smooth out or damp shock impulse, these KMS Shock Absorbers are sourced from highly trusted and reliable manufacturers across the world. Avail from us, the highest grade KMS Shock Absorbers at pocket friendly prices. Availability Adjustable Shock AbsorbersSelf Compensating Shock AbsorbersHeavy Duty Safety Shock Absorbers.

• Shape: Square
• Application: Automobile Industry
• Color: Yellow
• Structure: Hard
• Feature: Easy To Fit, Good Quality

If you are searching for Shock Absorber Bracket, then you can consider our company. We are reckoned as one of the prominent Manufacturer and Supplier of Shock Absorber Bracket in India. This bracket is available in different sizes and dimensions. We can also consider customized solutions for the same. Our Automotive Shock Absorber Bracket is highly demanded in the market because of their tensile strength, longer service life, fine finishing and longer life.

• Material: Rubber
• Feature: Wire Grommet
• Hardness: 20-80 Shore
• Size: Available in Various Size
• Temperature: -100
• Weight: 10-100 Gm

A wide range of sizes is available to reduce the vibration level and to provide damping.A wide range of sizes is available to reduce the vibration level and to provide damping.

• Material: Rubber
• Shape: Round
• Color: Black
• Hardness: 20-80 Shore
• Temperature: -100
• Weight: 10-100 gm

With our fast and modern transit facilities, safe and timely deliveries of consignments are guaranteed. The company is backed by a quality control wing that includes skilled quality inspectors who strictly check all the products before delivery.

We are a major Manufacturer and Supplier of Rubber Grommets, which are ring and edge strip shaped. The Rubber Grommets are inserted through thin material like fabric and sheet metal as well as carbon fiber, wood, and honeycomb composites. Made using the best-grade rubber as well as metals and plastic at times, the Rubber Grommets are provided with proper flaring and collaring to ensure steady positioning. The Rubber Grommets can prevent pierced material tear and abrasion, while protecting wire insulation from abrasion at the same time. Further, the Rubber Grommets are usable for cables and lines being routed through penetration and they can cover sharp edges of piercing.

• Type: Anti Vibration Mount
• Material: Rubber
• Shape: Round.Square
• Certification: ISO 9001:2008
• Application: Industrial
• Color: Black
• Brand Name: Inovine Enterpries

Inovine is engaged in the manufacturing of quality anti-vibration mounts, shock and vibration isolators that meet the needs of all types of machinery and active and passive vibrations coming on the equipment.

Unitech Auto Products are involved in presenting a broad consignment of Rubber Grommets.

• Brand Name: BAJAJ, ENDURANCE

We are offering front fork assembly.Fork assembly,fork pipe,under bracket, main spring, bottom case rh and oil seal etc.

• Material: Mild Steel
• Color: BLACK
• Size: 8-50mm
• Dimension: M8-M50
• Country of Origin: Made in India
• Application: Industrial
• Brand Name: APT
• Adjustments: ADJESTABLE AND NON ADJESTABLE
• Stroke Length: 6-100mm

Disc-Valving to adapt to varying road and operating conditions Gas-charged versions for instant response and better ride and handling Steering Dampers for manoeuvrability

• Application: Industrial
• Material: Stainless Steel
• Reduces: Vibrations
• Features: flexibly connected
• Product Type: Machine
• Weight: heavy
• Finishing: Galvanised

Yash Plastrotech owns a successful record of producing automobile components such as Shock Absorber Parts fully customized to your requirements. These automobile components are produced from top notch raw materials and tested for its durability keeping in mind the purpose of its existence.  

Heavy duty shock absorbers incorporating high damping characteristics helps eliminate wheel hop. Fully contained within the suspension, mounted between the front hanger and the spring seat they are protected from road damage. This also allows for a more compact design giving a shorter stroke which reduces heat and increases service life. For most applications the shock absorber can also act as a check strap. • Pivot Bush The exceptionally tough, metal encased Pivot Bush chosen for its very compact design, virtually eliminates rubber extrusion thus greatly extending its effective working life. The bonding of the bush material to the outer case and inner sleeve ensures the bush works in shear and cannot rotate. This compact design also permits front bracket reinforcing to be closer to the point of side load and reduces unwanted side movements. • Spring The shape of the spring contains the suspension geometry. Tecair I has a standard rating of 12 tonne which is specially designed for arduous applications. • Air Spring Using quality large diameter, low pressure air springs allow a reduction of the required air pressure at typical axle loads. A 4 bar system fed from a 6 bar air reservoir more readily maintains the correct ride height and trailer stability. With the air spring including an internal bump stop, a long service life is expected. • Axle Seat The design philosophy of the axle seat for Tecair I is allowing for ease of fitment of the shocker during servicing. • Axle The axle, which serves as a torsion beam, is manufactured from 127mm diameter seamless manganese alloy steel, its high strength and resistance to bending characteristics are a critical part of the design of Tecair air suspensions. - 16mm wall thickness suitable for highway operations. - 19mm wall thickness suitable for off-road operations.

• Material: Iron
• Shape: Round
• Style: Recoil
• Wire Diameter: 40 mm
• Usage/Application: For Excavator Use

• Brand Name: Duroshox
• Type: Two and Three Wheeler Shock Absorber
• Rear Twin Tube Shocks: 50 CC,500 CC

We manufacture reclaim rubber & make other products like solid & tractor tyres, passenger and truck tyres, moulded rubber products, rubber mats & flaps, footwear, flooring material, retread tyres, among other rubber goods from this rubber.

The AVM’s supplied by Decimin are manufactures in ALL-METAL construction by using Ni-Cr Vibra Pads. This construction without any rubber, ensures high resistance to aging and very high life compare to conventional Rubber Mounts.

We manufacture mountings for automobiles, especially for four-wheelers. These rubber mountings are highly durable, strong and heat resistant and are made in such a way, so as to prevent from shock excitation.

We are engaged in the manufacture and supply of premium-quality Anti Vibration Mountings. They are made using premium-quality rubber at our advanced infrastructure facility. They are made using the latest equipments and techniques and comply with industrial quality standards. These mountings are used for different industrial purposes. They are renowned for not causing any vibration and absorbing impacts. They are highly acclaimed for their sturdy designs and damage-resistant features. Their resistance to temperature and moisture enables them to last for long time durations. They dry quickly and are suitable for rugged use. They are tested by quality auditors before dispatch to ensure client satisfaction with the product. We supply them to our clients at reasonable prices within the specified time-period. They are easy to install and maintain.

Rubber Grommets with hole to protect or insulate cables and wires. Its selection based. RCI produces grommets as per costumer specification.

Rotary DampersSmall dampers refi ne end product ACE rotary dampers mainly provide an invisible yet valuable service as a maintenance-free machine element to allow controlled deceleration of rotary or linear movements.They are often necessary to make careful opening and closing of small lids, compartments and drawers possible and they protect sensitive components while increasing the quality and value of products. They are easy to integrate. The harmoniously gentle movements of these little decelerators can be achieved with continual rotation or with limited pivoting angles. They slow down left, right or double sided rotation. Suitable for almost any application and currently also available in adjustable variations, they provide braking torques of 0.05 Ncm to 40 Nm.