Refrigerant Compressors Dealers in Pune

• Brand Name: Grasso York Kirloskar Bitzer Vilter Etc.
• Dimension: 65 75 95 100 110 130 160 Etc
• Material: Aluminium
• Compressor Brand: Grasso Kirloskar York Vilter Carrier Sabroe Etc.
• Compressor Type: Reciprocating Compressor
• Surface Finishing: Machined
• Material Grade: Die Cast
• Weight: 500 - 2500 gms

• Size: BASED ON OUR RATING / CAPACITY CHARTS.
• Type: REFRIGERATION AMMONIA COMPRESSORS
• Brand Name: METALEX
• Certification: ISO 9000 / PED CERTIFICATION / CE CERTIFICATION.
• Application: COLD STORAGES / ICE PLANTS / MEAT & FISH FREEZING PLANTS / DYES & CHEMICAL COOLING / PHARMA COOLING.
• Voltage: NOT APPLICABLE ( ACCEPT FOR PACKAGE UNITS)
• Condition: NEW
• After-Sales Service Provided: YES
• Truck Model: NOT APPLICABLE.
• Model Number: AVAILABLE FROM 1 CYLINDER TO 9 CYLINDER
• Place of Origin: INDIA

• Brand Name: asha enterprises
• Color: GREY
• Condition: EXCELLENT
• Certification: ISO
• Type: INDUSTRIAL
• Country of Origin: India

The ammonia compressor pressurizes the ammonia gas, which heats up as the pressure increases. As the ammonia is pressurized, it travels up into the coils at the back of the refrigeration unit, where the heat dissipates.

KPCL's reciprocating compressor range includes KCKCX, PC Series models of compressors, used in varieties of applications. The reciprocating range of refrigerant compressors has wide applications in the area of industrial refrigeration which includes food & beverage processing and preservation, ice plants, process refrigeration which includes pharmaceuticals, chemicals etc. The range also caters to HVAC applications including water chillers etc. Superior COP values at full and part load operation, modest investment and low maintenance cost are some of the benefits of KPCL's refrigeration compressor that makes it the first choice of customer.

• Brand technique: Scroll compressor
• Capacity control: Fixed speed
• Colour: Blue
• Compressor power supply [V/Ph/Hz]: 400/3/50 460/3/60
• Configuration code: Single
• Connection type: Brazed
• Description: SM120-4
• Diameter [mm]: 254 mm
• Discharge connection height [mm]: 515 mm
• Discharge connection pipe size [in]: 7/8 in
• Discharge connection size [in]: 7/8 in
• Drawing number: 8552037b
• Economizer: No
• Factory HP [bar]: 33 bar
• Factory LP [bar]: 25 bar
• Fitting standard: ODF
• Frequency [Hz]: 50/60

Refrigerant compressors are designed to operate with Ammonia, halocarbons & other refrigerants. Ideally suitable for continuous duty , process refrigeration small ice plants & cold storages.

Salient Features of Construction :   1. Welded steel crankcase : Low in weight Gas tight and impact proof Smooth internal surfaces guarantee good oil condition. 2. Water cooled cylinder block : This crankcase has in built water cooling jacket for cylinder head to avoid over heating of piston and liner element leading to trouble free long life of compressor 3. Silent oil pump : Internal gear pump is provided with special self aligning driving plate to reduce vibrations to compressor and ensure trouble free long life of oil pump. 4. Pulsation dampener : Built in pulsation dampener to reduce pulsation to entire system of refrigeration 5. Crankshaft and main bearings : Bearing surfaces of the high quality nodular cast iron crankshaft are ground to fine tolerances.Main bearings are white metal lined steel backed bushes, pressed into the cast iron bearing covers. Intermediate bearing blocks are provided with split type bearing shell of the same type. Each crankshaft is dynamically balanced together with the counter weights 6. Piston / connecting rod assembly : Perfect sealing and low oil consumption due to 3 compression and 2-oil scrapper rings on each aluminium piston. The nodular iron connecting rod is drilled through for pressure lubrication of the piston pin Steel backed white metal shells on big end and bronze bearing on small end of connecting rod.The complete assembly can be removed from the top for servicing without withdrawing the cylinder liner 7. Cylinder liner and suction valve : Interchangeable cylinder liners are made of finegrained, centrifugally cast, alloy iron. Fine boring and honing results in a mirror smooth running surface. A hydraulic mechanical suction valve lifting mechanism on each individual cylinder achieves loading and unloading. For unloading, the suction valve ring is lifted from its seat in the cylinder collar by spring tension. Admitting controlled oil pressure to the control piston, allowing the suction valve ring to descend on its seat effects loading or cylinder. 8. Discharge valve assembly : Three concentric discharge valve rings ensure ample gas passage at low  lifting height. The use of sinusoidal springs together with precision machined and lapped surface results in a trouble-free operation for a remarkably long time. Minimum inventory for spares since most parts are identical throughout the CH series compressors. 9. Lubrication system & oil filter : Forced Lubrication by an Internal Gear pump directly driven by the Crankshaft. The Pump incorporates two differential pressure regulators to provide separate pressures for two oil systems : Lubrication system and control oil system for operating cylinder loading unloading mechanism. Automatically operating solenoid valve ensures complete unloaded start of compressor. A Metal gauze suction filter element and a throwaway discharge paper filter cartridges are provided for excellent filtering capacity of the lubricating oil.    Operational Characteristics :   1. Quick maintenance : Parts subjected to wear are easily accessible through large service doors with     minimum special tools2. Easy cleaning : suction gas strainer Inside gauze strainer element can be easily removed and cleaned     within no time .3. Easy maintenance : as piston/connecting rod assembly can be removed without removing the cylinder     liner.4. Minimum oil consumption : is ensured by providing three compression rings & two oil scraper rings      per piston - thus minimising oil through discharge gas line5. Safety : is ensured by bult-in arrangement of buffer spring which protects compressor from incidental      liquid hammer6. Extra safety : is ensured by built-in sight glass, making oil return flow visible hence avoids dry run of     commpressor and protect bearing wear and tear7. Trouble-free long running life : this is possible due to highly effective oil purification by two filters.    CH-Series Compressors are :   1. Designed to operate with Ammonia, R22 & other HFC refrigerants.2. Ideally suitable for continuous duty, process refrigeration liquefaction plants, ice plants, cold storages, etc.3. Most suitable for industrial refrigeration and low temperature applications4. Available in single stage as well as two stage versions    Accessories :   1. V-belt Drive 2. Base Frame for Compressor3. Oil Separator 4. Shut-off Valves5. Gauge/Cutout Board Assembly6. Crankcase Heater    Single Stage Compressor Click Here for Table and Graphs    Two Stage Compressor Click Here for Table and Graphs   Note : We reserve the right to modify the specifications in accordance with improved designs. Although every effort has been made to maintain accuracy in the data given, the figures are in no way binding.Q : cooling capacity [kW]; Pe : compressor brake power [kW]The chart rating is for maximum speed : 1000 rpm; Minimum speed allowed : 400 rpmThe capacity and power consumption ratings are possible by interpolation for other speed conditions.The motor power is 10% over the compressor brake power DTSC : 0°C; DTSC : 50C   Warranty : Every compressor carries a standard warranty against manufacturing defects of 12 months from date of startup / commissioning by CTTPL authorised engineer or 18 months from date of dispatch whichever occurs early. The warranty card must be produced for warranty claims. Standard warranty does not contain consumables like oil, oil filter, gaskets, o-ring etc and warranty is not applicable if failure occurs due to fault in system design    

Salient Features Of Construction    1. Welded Steel Crankcase Less in weight, gas tight and impact proof smooth internal surfaces guarantees good oil condition. 2. Water cooled cylinder block The crankcase has in built water cooling jacket to avoid over heating of piston and liner element leading to trouble free long life of the compressor 3. Lubrication system and filter Crankshaft driven gear pump provides forced fed lubrication. The Pump incorporates a differential pressure regulator to provide separate pressures for two oil systems: lubrication system and control oil system. Automatically operating hydraulic delay valve ensures complete unloaded start of the compressor results in lesser starting current. A metal gauze suction filter element and magnetic filter are provided for excellent filtering capacity of the lubricating oil. 4. Crankshaft and main Bearings Bearing surfaces of the high quality nodular cast iron crankshaft are ground to fine tolerances. Main bearings are white metal lined with steel backed bushes, pressed into the cast iron bearing covers. An intermediate bearing block is provided with split type bearing shell of the same type. Each crankshaft is dynamically balanced together with the counter weights 5. Piston and Connecting Rod Assembly Compression and scrapper rings on the aluminum piston provided perfect sealing and low oil consumption. The nodular iron connecting rod is drilled through for pressure lubrication of the piston pin. Steel backed white metal shells on big end and bronze bearing on small end of connecting rod. The complete assembly can be removed from the top for servicing without withdrawing the cylinder liner 6. Cylinder Liner and Suction Valve Interchangeable cylinder liners are made of fine grained, centrifugally cast, alloy iron. Fine boring and honing results in a mirror smooth running surface. A hydraulic mechanical suction valve lifting mechanism on each individual cylinder achieves efficient and quick loading and unloading. For unloading, the suction valve ring is lifted from its seat in the cylinder collar by spring tension. Admitting controlled oil pressure to the control piston, allowing the suction valve ring to descend on its seat effects loading or cylinder. 7. Discharge Valve Assembly Three concentric discharge valve rings ensure ample gas passage at low lifting height. The use of sinusoidal springs together with precision machined and lapped surface results in a trouble-free operation for a remarkably long time. Minimum inventory for spares since most parts are identical throughout the CH series compressors.   OPERATIONAL CHARECTERISTICS 1. Quick Maintenance : Parts subjected to wear are easily accessible through large service doors with minimum special tools 2. Easy Cleaning : Suction gas strainer inside gauze strainer element can be easily removed and cleaned within no time. 3. Easy Maintenance : Piston/connecting rod assembly can be removed without removing the cylinder liner. 4. Minimum oil Consumption : I s ensured by providing compression rings & oil scraper rings per piston - thus minimizing oil through discharge gas line 5. Safety: I s ensured by built-in arrangement of buffer spring which protects compressor from incidental liquid hammer 6. Extra Safety : Is ensured by built-in sight glass, making oil return flow visible hence avoids dry run of compressor and protect bearing wear and tear 7. Trouble-Free Long Running Life : This is possible due to highly effective oil purification by two filters.   CH SERIES COMPRESSORS are : 1. Designed to operate with Ammonia, R22 & other HFC refrigerants.2. Ideally suitable for continuous duty, process refrigeration liquefaction plants, ice plants, cold storages, etc.3. Most suitable for industrial refrigeration and low temperature applications   Accessories : 1. V-belt Drive 2. Base Frame for Compressor3. Oil Separator 4. Shut-off Valves5. Gauge/Cutout Board Assembly 6. Crankcase Heater

kirloskar screw refrigeration compressor package is complete with compr + motor + oil seperator + oil cooling arrangements, pipins, filters and with control panel. this are widely used with food and beverage processing, chemicals, pharmaceuticals, and other industrial process refrigeration applications. we package howden uk compressors and are authorised packagers.

we offer ammonia refrigeration compressor. metalex piston compressors offers a range of outstandingly reliable, open type, reciprocating ammonia refrigeration compressor. all designed to work efficiently in almost any type of industrial refrigeration installation for cooling or freezing applications. metalex compressors have already proven themselves all over the world for many years in terms of reliability under the most demanding circumstances and with an alert eye to economics. these refrigeration compressor are used in industries like cooling industry, fisheries, chemical industry, sea food industry etc.

Refrigeration Compressor, Stainless Steel Valves, Refrigeration Oil

we are offering Refrigeration Compressor. The refrigerants are,suitable for water dispenser ,small refrigerator and other small refrigeration appliance.The structure form is crank connecting-rod reciprocating piston type, and adopt semi-direct inlet type.The main feature:high efficieny,low noise,light vibration,good reliability.

Air Conditioners, Repeaters, Mild Steel Indoor Evaporator Unit

Air conditioner, Pump, hydro turbines

Refrigeration Compressor, Gas Compressor, Reciprocating Air Compressor

Refrigeration Compressor, Gas Compressor, Reciprocating Air Compressor

Refrigeration Compressor, Ammonia Compressor, centrifugal air compressor

valves fittings, inline check valves, Compressor Spare Parts

refrigeration spare parts, refrigeration gases, Refrigeration Oil