Regulating Valves Dealers in Pune

MREG-A and MREG-B are angleway and straightway hand regulating valves, which act as normal stop valves in closed position. The valves are available in two different versions � MREG-A and MREG-B designed for regulation purposes in liquid and expansion lines. The valves are designed to meet the strict quality requirements on refrigerating installations specified by the international classification societies and are carefully designed to present favourable flow conditions and accurate linear characteristics. MREG-A and MREG-B are equipped with vented cap and internal backseating enables replacement of the spindle seal whilst the valve is active, i.e. under pressure.

• accuracy: +/- 0.2 bar
• Turndown: 15:1 to 12:1

Steam boilers are usually designed to work at high pressures. Working them at lower pressures can result in carry over of water.Steam at high pressure has a lower specific volume which means that a greater weight can be carried by a pipe of a given size. We recommend distribution of steam at high pressure and reduction at the point of usage. This reduces capital loss for piping and insulation and also reduces distribution losses.Steam pressure may be reduced to save energy. Steam at lower pressures has higher latent heat. Reduced pressure of steam also leads to reduced heat loss and lower flash steam formation from open vents etc.

• Condition: New
• Finishing: Polished
• Color: Silver
• Size: 15mm to 300mm
• Application: Industrial
• Pressure: Low Pressure

For the safe storage of our offerings, we have installed our own storage facility. Laced with modern amenities, our facility helps us in furnishing urgent requirements of the clients at a time. Our organization is renowned among reputed suppliers of premium and superior grade Pressure Regulating Valves across the nation. Features : High grade material Best quality Cost effective

CREG is angle-way and straight-way regulating valves, which act as normal stop valves in the closed position. Regulating valves are designed to meet the strict quality requirements on refrigerating installations and are carefully designed to present favorable flow conditions and accurate linear characteristics CREG is equipped with internal back seating enabling the spindle seal to be replaced with the valve still under pressure.   Features : Applicable to all common non flammable refrigerants including R 717 and non corrosive gases/liquids dependent to sealing material compatibility. Designed to ensure perfect regulation. Internal backseating enables replacement of the spindle seal whilst the valve is active, i.e. under pressure. Easy to disassemble for inspection and possible repair. Max. operating pressure: CREG: 25 bar g (362 psig) Full temperature range packing gland - 46/+150°C.

Regulating valves from Alfa Laval are the ideal choice whether you are looking for the perfect flow control or constant pressure. CPM-2 – Constant Pressure Modulating Valve The Alfa Laval air-actuated CPM-2 valve series is designed to maintain either constant inlet or constant outlet pressure – important for such applications as pasteurization, separation, filling systems, filters, filtration and heat exchangers.   Inside, a diaphragm/valve plug system reacts immediately to any alteration of product pressure and changes position so that the pre-set pressure is maintained. The valve operates with a pressure-regulating valve for the compressed air and a pressure gauge in the product line.   The optimum body design of the CPM-2 results in several product benefits, such as excellent cleanability. As the inlet is tangential to the bottom of the valve body there is no sump. One special plug allows very low capacities and high CIP flow. SPC-2 – Sanitary Electro-Pneumatic Modulating Valve The SPC-2 is a sanitary valve for use in stainless steel pipe systems. Typical applications are automatic control of pressure, temperature, flow rates and tank levels. The combination of electro-pneumatic actuator and specially designed valve cone makes this one of the most responsive and accurate regulation valves available.

• Material: Stainless Steel
• Valve Size: 1.5 inch
• Operating Pressure: Up to 3,700 psig
• Process Fluid: Liquid
• Body Style: Angled and Inline
• Set Pressure: 50 psi

Located in Pune(India), our organization is involved in catering to the market with a qualitative array of products. One of the major concerns of the organization is to make available only quality approved products to the buyers and thus we check the entire range at all stages.

Pressure Regulating Valve is ideal for application where downstream pressure requirement is constant. They are used in various process lines, Stream, Nitrogen Blanketing systems, Fuel control systems and LPG distribution systems. Rutcon PRV provides a reliable and economic solution for Pressure Regulation. Sizes : ½� to 8� (15mm to 200mm) Higher sizes available on request Ratings : ANSI B 16.5 150# and 300# other standards available on request. Application : Used in fertilizers, chemical, and pharmaceutical plant etc. and other process industries commonly used for burner fuel oil pressure regulation, nitrogen blanketing system, etc. Design & Performance Features Used for long trouble free serviceValve Disc is reversible and can be changed quickly for renewed lifeSelf actuating type, does not require any auxiliary energyRange of body & diaphragm material combinations to meet majority of requirementsPressure balanced design, any fluctuations in the inlet pressures has negligible effect on the regulated pressure

We manufacture regulating valves which work as regulators for control of gases and liquid in their specified application. Our regulating valves are durable and long lasting in nature. These devices regulate the air discharge pressure in a compressor delivery line. The specification of this product is : ranges from 34", 1", 1 14"

Socket Weld Strainer, CONTINUOUS BLOWDOWN VALVE, Blowdown Valve

Temprature Regulating Valves, Emerson Semi Hermetic Compressors