Relay Parts Dealers in Pune

Features DIN rail mountable EightFour phototriacs on a single board LED indication for input signal Positive supply commonnegative supply common selection by jumpers for ip signal Output points in onetwo groups. Each group consists four op points Individual op point can be grouped ungrouped by jumper selection Technical Specifications Input signal voltage:20 VDC-28VDC28VDC4-9 VDC 10-15 vdc Max. input current:20 mA @24VDC Max. output voltage:600 VAC Min.output voltage:24 VAC Max. load (rms) per output point:1 Amp Peak non repeatitive surge current:10 Amp Input to output electrical isolation: 3.55 KV Max. Voltage drop in output voltage: 1.7 V @ 1 Amp load Switching delay Off to ON and ON to OFF:Less than half cycle Load type:Resistive and Inductive Size:8 point :-118x90x50 (WXHXD) 4 point :-62x90x50 (WXHXD) Applications a) For switching contactors from PLC outputs. b) For switching AC loads like single phase motors, AC actuators, AC solenoid valves, AC electromagnets in industrial use directly from controller outputs. c) To switch Air conditioner, microwave ovens, washing machines, personal hygiene systems, refrigerators, fan heaters, domestic fans, inductive heating cookers, water heaters directly from controller outputs. d) In all applications where we need very fast switching and require isolation between driver and driven circuits. The load can be inductive or resistive. Available in 48 points variants. Solid State Relay boards with input signal other than 24VDC can be supplied on demand. StandardsApprovals CE certified PCB:IEC 61373 Optotriac:ULVDE Connectors:CE Profile and end plates:UL Caution: DO NOT USE SSR BOARD FOR SWITCHING DC SUPPLY !

Relay Sockets - The relay plugs into the relay socket. Relay sockets are available in a wide range of sizes, materials, shapes and colors. While all relay sockets perform the same function, the specific application determines the type of relay socket needed. Specific applications have requirements for the relay socket's rating, dielectric strength, insulation resistance and temperature range.

We are a client-centric firm and make sure that the entire lot is provided in premium packaging for ensuring complete safety during handling, warehousing and transit. We have a strong distribution network, owing to which we efficiently transport the goods to the desired place. Our 2 Relay GSM Based Control Board is manufactured using the latest technology and is largely appreciated for its high-performance.

We manufacture 8 Channel Relay Interface Module. This module is used to interface variety of analog & digital signals from PLC, DCS or RTU.   Features & Benefits : Control - 24 V DC Output - 5 Amp, 230 V AC Compact universal DIN rail mounting with input & output connections. Designed with Solid State Relays. Input On indication. Sturdy construction, Easy installation

VSOFT provides Test benches and special purpose machine services to the customer from Industrial Automation and Measurement Domain. We develop test benches for particular customer product according to their requirement.

We are Relay Module Manufacturer and Exporter. Relay Module compliant to IEC 60664 standard. Relay Modules Manufactured are tested as per International Standards. Our Relay Module has got a unique Barcode and we maintain strict quality standards. We are Relay Module Exporters In India. Our Industrial Relay Modules are serving variety of domains like process, test measurement and other diverse fields. Our Din Rail Mounting Relay Modules has always been first choice for every manufacturer. Our 5A Relay Modules are being used in industry for driving loads like contactors, motors, starters, lights, fans and much more. our 48V coil Relay Modules are deployed in various battery operated applications like in material handling and automobile.

• Brand Name: Sub Zero
• Driven Type: Electric
• Current Type: AC, DC
• Color: Black
• Condition: New
• Application: For Panel A/C & Application Requiring Alarms
• Size: 75 X 34.5mm
• Feature: Auto Controller, Switch Off Compressor At Setpoint. Manual / Auto Restart Options. Alarm Output For High / Low Temp
• Voltage: 230V
• Display Type: Digital
• Mounting Type: Panel Mount, Panel Cutout : 71 X 29mm
• Type: Temperature Controller
• Temperature Range: 0.0°C To +50.0°C (for SZ-7558-P) -40.0°C To +50.0°C (for SZ-7568-P)
• Country of Origin: India
• Power supply options: 230Vac Standard

• Voltage: 250V
• Operating Voltage: 12VDC 24VDC
• Rated Current (mA): 40 25mA
• Contact Configuration: DPDT, Potential Free
• Contact Current Rating: 8 A at 250 VAC
• Max. switching voltage: 440 VAC,300 VDC
• Mechanical operation: 18,000 /hr
• Terminal Type: Screw Terminal
• Nominal Current: 24A
• Rated surge Voltage: 4KV
• Stripping Length: 8mm
• Insulation resistance: 500V DC
• Ambient temperature: -45 to +120 C
• Mounting: Din Rail Mountable

• Type: Test Bench
• Weight: 5 Kg
• Color: Gray and Black
• Voltage: 220V
• Condition: New
• Automatic Grade: Manual
• Power: 1-3kw
• Driven Type: Electric
• Warranty: 1year
• Appplication: Inspection
• Brand Name: VSOFT TECHNOLOGY
• Application: Testing of Chattering of Electromagnetic Relay
• Input Voltage: 230V, AC, 50Hz.
• Name: Relay Chattering Unit

• Channels: 1 / 2 / 4 & 8
• Material: Plastic
• Brand Name: Trinity Touch
• Frequency: 50 Hz
• Packaging Type: BOX
• Power Source: Electric
• Temperature: 60 Degree C
• Country of Origin: Made in India
• Voltage: 240 V
• Color: BLACK
• Model Name/Number: TRINITY TOUCH
• Usage/Application: Control Panel
• Contact Rating: 5 A

• Application: AC AND DC
• Voltage: 24V
• Design: Standard
• Model Number: ULEP24D16- COB V1
• Brand: UL GROUP
• Input status indication: 3mm Green Led.
• Ambient operating temp: 0 deg C to 60 deg C
• Current: 10A

• Application: Control AC/DC Load
• Current: 10A
• Voltage Type: AC/DC
• Parts: Relay Board
• Coil Voltage: 5V
• Control Signal: 15-20mA
• No of Relay: 2

• Features: DIN rail mountable,indication etc.
• Input signal voltage: Input signal voltage
• Max. load per output point: 5 Amp

DC Solid State Relay Board: This is a opto-Transistor with optical isolation between input signal and output signal.This is to be used for switching 5V-100VDC,5060Hz supply by 5V-230 VDC input signal. Features DIN rail mountable EightFour DC SSRs on a single board Sink or Source input selection by jumper selection LED indication for input signal Semiconductor Fuse protection for short circuit and overcurrent. Output points in two groups. Each group consists four op points.

With our vast experience in this field, we are able to offer the finest range of Solid State Relays Module. Solid State Relays Module is a system where switching takes place between two moving contacts. Switching in Solid State Relays Module takes place across the junction of semiconductor device. Devices are Triacor Thyristor for AC Switching & Transistor for DC Switching in the most Solid State Relays Modules. Galvanic separation in our Solid State Relays Module is achieved by Optocouplers, which are equipped with integrated trigger circuit (optotriac) that provides the efficient switching function for the corresponding load type. Details Current : 2A to 150 AmpOutput Voltage : 240 V or 600 VACDC output : 110 VDC, 10 Amp to 100 Amp From Modules Solid State Relays Modules are available like 2/4/8/16 channels with base with fuse protection, O/p = 1C / o / 2C /o contacts

• Brand Name: KARLPL
• Application: Industrial Automation
• Channels: 4
• Frequency: 50HZ
• Model Number: RLY04, RLY01
• Pole: Single Pole
• Current Ratings: 10Amp
• Input Supply: 24V,12V
• Power Ratings: 24V, 12V
• Relay: Omron,O/E/N Relay

• Voltage: 220 V
• Power Source: Electric
• Frequency: 50 / 60 Hz
• Phase: Single Phase

• Color: Grey
• Brand: Wago
• Part Number: 857-304
• Termination Method: 6 (Interface Electronics)
• Maximum Operating Temperature: -40 to 60 DegreeC
• Current Rating: 10 mA

• Brand Name: Sai Control System
• Channels: 8
• Power Source: Electric
• Usage/Application: Control Panel
• Input Voltage: 24 V DC
• Switching Frequency: 50 Hz

• Model Name/Number: 14F-1Z-A1
• Rate Voltage: 300VAC
• Rated Current: 5A
• Insulation Voltage: Less than 3KV
• Socket Material: Flame Retardance-PA46-S250F6 (V0)
• Contacts Spring Material: QSn6.5-0.1

• Relays: 24VDC, 1 Changeover
• Relay Socket: 1 Changeover PCB solderable type
• Terminals*: Screw type suitable for 2.5Sq.mm conductor
• PCB: Glass Epoxy double sided PTH with Lacquer
•  :  

ApplicationRelay Interface Module 1changeover slim relay with option of fuse & fuse fail indication used to interfacing PLC/Drive/DCS Digital Outputs to field or field devices. Outputs are Galvanically Isolated through Relays.

• No. Of Channels: 1, 2, 4, 6, 8, 12, 16
• No. Of Contacts: 1 N/O, 1 C/O, 2 C/O
• Coil Voltage: AC : 24V, 48V, 110V, 230V DC : 5V, 12V, 24V, 48V, 110V
• Coil Looping: Nigative, Positive, Isolated

• Voltage Generators: 4 x 0 to 150 V
• Current Generators: 6 x 0 to150 A
• Binary Inputs: 8
• Phase Angle: -360 to +360
• Frequency sine: DC, 10 Hz - 1000 Hz
• Current Generators Power: 150 VA @ 15 A, L - N

• Color: Blue
• Item Code: 9023
• Relay Type: DIN Rail Relay Socket
• Suitable Relay Models: RK3 , LK3PN
• Socket Type: Modular
• Usages: Lab, Industries
• Model No.: 9023

Relay Interface Modules - SMC manufacturing complete range of active and passive relay modules. These are having some advantages like vertical fuse holders which eliminates the changes of falling down of glass fuse at the time of replacement. These modules are having screw or screwless terminals for output connection. One important feature is these are very compact and economical.

• Material: Metal
• Application: Industrial
• Surface Finishing: Polished
• Durability: Long Life
• Resistivity: Rust Resistant
• Drive Type: Electric

The clients can avail from us the advanced Phase Angle Controller, which ensures that heaters deliver exact heat, as per heater load available. We are the prominent Phase Angle Controller Manufacturer and Supplier in India. This Phase Angle Controller is available at affordable prices. Our Phase Angle Controller is especially designed for using with radiant heating cassettes. Known For : Higher performanceLow maintenanceCompact designAvoids temperature over shooting.

ISOLATED RELAY OUTPUT MODULE   Provides effective 3 way solution between supply, input switch & relay output Provides isolation of dissimilar circuits Enables control of multiple loads when only one relay output is available Isolated Relays are mainly used in fire safety applications that interface with HVAC system, elevator controls and access control doors. It can also be integrated with PLC systems.

• Application: Generator,Genset,PLC
• Brand Name: Yugandhar Systems.
• Voltage: 12VDC or 24VDC.
• Warranty: 1-Year.
• Input Voltage: 12V/24VDC
• Model Name/Number: 2-Channel Power Relay card.

Changeover Relay Interface Module with Option of fuse & fuse fail Indication used to Interfacing PLC Drive DCS Digital Outputs to field or field devices. Outputs are Galvanically isolated through Relays.