Resistance Meters Dealers in Sinhagad Road, Pune

We are manufacturers of the best quality reliable micro ohm meter which are high sensitivity multimeter, optimized for performing low level measurements.Features • 4½ digit LCD display with annunciations• Resolution 0.1 μW on 2 mW range• Mains cum Battery operated (Rechargeable Ni-cd)• High measurement current (10A) for faster settling on inductive loads• True 4 wire resistance measuring technique• Eliminates lead resistance errors inherent in two wire measurement system• Pulse Mode, Auto Hold Operation• Low Battery indication to prevent deep discharge of internal recharging battery

Static contact resistance measurements are essential to check the health and functionality of the main contacts of the circuit breaker. If the contacts are not in a good condition there can be arcing and single phasing. Due to oxide depositions and absorption of moisture, the contact resistance often increases. This leads to I2R losses in the contacts due to hot-spotting when the circuit breaker is closed. MVT Contact Resistance Meter uses Kelvin’s 4-wire method to accurately measure the static resistance of the circuit breaker main contacts. It has a built-in continuous DC source of up to 200A and performs resistance measurements in the micro-ohm range by measuring the millivolt drop in the contacts. MVT is compact and portable, which allows it to be taken on-site for field testing requirements. It is suitable for measuring the contact resistances of vacuum circuit breakers, high voltage circuit breakers, extra high voltage circuit breakers, isolatorsdisconnectors, bus bars, and many other components used in power transmission and distribution.

Programmable Settings for Foil Width and Resistivity Range. 16 x 2 Alphanumeric LCD with Backlit. Illuminated background for foil. Easy to use for Semi-skilled Unskilled users. Functional on 230V, 50Hz AC

Dynamic Contact Resistance Meters, battery capacity tester

• Resistance Measurement Range: 0 to 200 milli Ohm
• Test Current: 30 A AC
• Make: Zeal
•  :  
• Model: ZMGCT
•  :  
• Power: 230V AC, ± 10 % , 50 Hz
•  :  
•  :  
•  :  
• Open circuit voltage: 8V
•  :  
• Acceptable setting: by press to set switch & potentiometer, using digital milli Ohm meter
•  :  
• Programmable Timer: 1 to 60 sec
•  :  
• Metering: kV
•  :  
• Time: ± 0.5 second
•  :  
• Accuracy: V
•  :  
• V: 1.5% of reading

Earth Resistance Testers

3 1 / 2 Digital resistivity meter, Three Phase Power Energy Meter Calibrator