Reverse Osmosis Plant Equipment Dealers in Akurdi, Pune

Reverse osmosis (RO) is a membrane-technology filtration method that removes many types of large molecules and ions from solutions by applying pressure to the solution, when it is on one side of a selective membrane. The result is that the solute is retained on the pressurized side of the membrane and the pure solvent is allowed to pass to the other side. To be "selective," this membrane should not allow large molecules or ions through the pores (holes), but should allow smaller components of the solution (such as the solvent) to pass freely. Reverse osmosis is used to purify Water and remove salts and other impurities in order to improve the color, taste or properties of the fluid.

We are supplier of industrial filters,reverse osmosis system. A water filter removes impurities from water by means of a fine physical barrier, a chemical process or a biological process. Filters cleanse water to various extents for irrigation, drinking water.

• Type: Water Purifier
• Application: Water Purifying
• Certification: CE Certified, ISO 9001:2008
• Color: Blue, Brown, Green, Grey, Light White, Red, White
• Voltage: 110V, 220V, 380V, 440V
• Condition: New, Used
• Automatic Grade: Automatic
• Driven Type: Electric
• Power Source: Electric, Solar
• Warranty: 1year, 2years

• Type: Water Cooled Generator
• Application: Water Cooled
• Rated Voltage: 220V, 240V, 380V, 440V
• Output Type: AC Single Phase, AC Three Phase, DC
• Rated Power: 1-100 Kw, 100-500 Kw, 1000-2000 Kw, 500-1000 Kw
• Speed: 1500-2500 Rpm, 2500-3500 Rpm, 3500-4500 Rpm, 500-1500 Rpm

• Type: Ro Water Purifier
• Certification: ISO 9001:2008, CE Certified
• Application: Water Purifying
• Weight: 0-10kg
• Voltage: 220V
• Condition: New
• Automatic Grade: Fully Automatic, Automatic
• Power: 1-3kw
• Driven Type: Electric
• Power Source: Electric
• Warranty: 1year
• Color: Blue, Brown, Light White, White
• Country of Origin: India
• Brand Name: Aqua
• Certification: ISO
• Capacity: 7-14L

15 LPH Purification capacity : 15 Ltr Hour Duty cycle: 75 Ltr Day(Max) Booster pump : 100 GPD RO Membrane : 80 GPD, Consealed Type Installation : Wall mounted Power Supply : Input - 110V to 330V Ac, Output - 24V DC = 2.5 Amp

• Type: Reverse Osmosis System, Water Softening System
• Condition: New
• Capacity: 100-1000L
• Material: Frp, Mild Steel, Stainless Steel
• tank type: Vertical
• Brand Name: CTPAC

We offer wide range of RO plants. These plants are skid mounted easy to use plug and play systems. Capacity from 100 LPH to 5000 LPH. All std. pressure pumps and membranes are utilized fro trouble free optimum operation.

• Warranty: 1 Year
• Feature: Membrane Cleaning System, Level Switches, Low Pressure Cut Off Switch, Water Softener
• Voltage: 220V /380V 50/60Hz
• Capacity (litres per hour): Above 1000 LPH1000-2000 , 2000-3000
• Operation Mode: Automatic, Semi-Automatic
• Types Of Machines: Reverse Osmosis Unit, UV Sterilizer, Activated Carbon Filter , Multi-Grade Filter
• Price Starting from: 75000

• Type: Ro Plant
• Condition: New
• Automatic Grade: Automatic, Fully Automatic, Manual, Semi Automatic
• Power: 1-3kw, 12-15kw, 15-18kw, 18-21kw, 21-24kw, 3-6kw, 6-9kw, 9-12kw
• Driven Type: Electric
• Warranty: 1year
• Automation Grade: Automatic, Semi-Automatic, Manual
• Plant Application: Industrial RO Plant
• RO Capacity (LPH): 0-200, 200-500, 500-1000, 1000-2000, 2000-3000, >3000

Premium grade, cost-effective prices and unsurpassed standard distinguishes our RO Plant from others in the marketplace. We ensure that the products will remain in a safe condition and for this; we have hired experts who keep a strict vigilance on the entire unit. Moreover, our unit is timely upgraded ensuring more safety. Features Advanced mechanism Purity & hygiene guaranteed High productivity

Available in 4” and 8” dia. Suitable up to 6 elements Mirror finished inside surface End port and side port options Suitable for pressure rating up to 1000# in FRP & 300# in SS housings

We are main supplier of this product.

The product is one of our most demanded DM plants. It is used as ion exchange equipment in various industries. Known for its high performance, we can customize the equipment as per our clients’ specifications.

• Brand Name: Thermax
• Capacities: from 0.2 million kcal/hr to 2.0 million kcal/hr
• Design pressure: Up to 4 kg/cm Square
• Steam temperature: Up to 140 Degree Celsius
• Firing fuels: HSD, LDO & FO with an efficiency of 90%

Reverse osmosis is the process of forcing a solvent from a region of high solute concentration through a membrane to a region of low solute concentration by applying a pressure in excess of the osmotic pressure. This is the reverse of the normal osmosis process, which is the natural movement of solvent from an area of low solute concentration, through a membrane, to an area of high solute concentration when no external pressure is applied. The membrane here is semipermeable, meaning it allows the passage of solvent but not of solute.To illustrate, imagine a semi permeable membrane with fresh water on one side and a concentrated aqueous solution on the other side. If normal osmosis takes place, the fresh water will cross the membrane to dilute the concentrated solution. In reverse osmosis, pressure is exerted on the side with the concentrated solution to force the water molecules across the membrane to the fresh water side. The membranes used for reverse osmosis systems have a dense polymer barrier layer in which separation takes place. Since Reverse Osmosis does not occur naturally, it must be created by applying pressure to the high solids water in order to force it through the membrane, with pressures from 8 - 14 bar for fresh and brackish water, and 40 - 70 bar for seawater, which has around 24 bar (350 psi) natural osmotic pressure which must be overcome. Design Considerations for RO Plant Fluid Systems RO Plants work on the Crossflow Filtration method, which takes the feed water and uses a percentage of it as a wash or reject stream, removing the solids during the filtration process.The product flow of an RO Plant is mainly a function of temperature and pressure. System recovery (product divided by feed) is limited by the characteristics of the feed water and can be controlled through the use of recycle stream. Product quality is based on a percentage of dissolved solids fed to the membrane. There should be an economic balance between product quality and system recovery. High recoveries increase concentration of dissolved solids in the system which degrades quality, but high recoveries make the system work more efficiently and decrease waste.Reverse Osmosis Plants do not deliver to service all of the water that is fed to them. During operation, some of the incoming water is used to wash down the membrane, and only part becomes finished product water. Purified water is referred to as product and wastewater is referred to as concentrate, or reject. The percent of water delivered as product is called the recovery, and depends upon the membrane and on total RO Plant design considerations.  Pretreatment – Reverse Osmosis Plants The feed water, depending on its source, may contain various concentrations of suspended solids and dissolved matter. Suspended solids may consist of inorganic particles, colloidal particles and biological impurities such as microorganisms and algae. Dissolved matter may consist of highly soluble salts, such as chlorides, and sparingly soluble salts, such as carbonates, sulfates, and silica. During the Reverse Osmosis process, the volume of feed water decreases, and the concentration of suspended particles and dissolved ions increases. Suspended particles may settle on the membrane surface, thus blocking feed channels and increasing pressure drop across the system. Sparingly soluble salts may precipitate from the concentrate stream, create scale on the membrane surface, and result in lower water permeability through the RO membranes. This process of formation of a deposited layer on a membrane surface is called membrane fouling and results in performance decline of the RO system. The objective of the feed water pretreatment process is to improve the quality of the feed water to the level which would result in reliable operation of the RO membranes. Based on the raw water quality, the pretreatment process for RO Plants may consist of all or some of the following treatment steps: Clarification followed by Sand Filtration for Turbidity removal Water disinfection with chlorine Hardness reduction by Softening Addition of scale inhibitor Reduction of free chlorine using sodium bisulfite/ Activated carbon filters Final removal of suspended particles using cartridge filters RO Plants - Post Treatment Based on the Output water quality required, the post treatment process for Reverse Osmosis Plants may consist of all or some of the following treatment steps  ozonation Ultra-violet chlorination systems We Offer a wide range of Reverse Osmosis Plants [RO Plants] Residential Reverse Osmosis Purifiers:We Offer a range of RO Water purifiers in 3/5 stage purification modules in below flow configurations:  10 LPH RO Purifiers 20 LPH RO Purifiers 25 LPH RO Purifiers Commercial RO Systems / Institutional RO Systems One of our most popular series, the Commercial RO usually comes in standard Models. These Commercial RO Systems can be customized to add Multimedia Filters & Activated carbon Filters, Water softeners, Antiscalant Dosing Systems, and UV sterilizers.These systems are used to purify water and remove salts and other impurities. It is also capable of rejecting bacteria The Main features of these RO Plants are: Microprocessor based Control Panel Powder coated frame 20 & 5 micron sediment pre-filter Stainless Steel Multistage High pressure pump FRP pressure vessel Product and Reject Flow Meters Low & High pressure switch High rejection TFC membranes Heavy duty high pressure tubing Pressure gauges These Commercial/Institutional RO Systems are available in following Flow Ranges: 200 LPH RO Plants 250 LPH RO Plants 400 LPH RO Plants 500 LPH RO Plants 750 LPH RO Plants Higher flow Rates can also be custom-built as per Customers requirement Industrial RO Plants/ Industrial RO SystemsWe manufacture a wide Range of industrial Reverse Osmosis Plants to cater the stringent process requirements. Our industrial reverse osmosis Plants are carefully customized and configured to suit the individual requirement of the output water, which varies from normal drinking application to the specific usage, such as food Processing, pharmaceuticals and boiler feeding requirement.These systems come standard with pre-filters, chemical dosing and Antiscalant dosing. Customization is available on all our units based on individual water application and customer needs.  Microprocessor based Control Panel 4" & 8" TFC spiral wound membranes FRP membrane housings Epoxy painted steel frame Stainless steel High Pressure Multi-stage pump 20 & 5 micron cartridge filter Low & High pressure switch Glycerin filled pressure gauges Permeate & concentrate flow meters Outlet Conductivity meter These Industrial RO Systems are available in the Flow Ranges from 1 M3/Hr Product Water Capacity and above. Standard Ranges are available in Multiples of 1 M3/Hr up to 10 M3/Hr. Higher flow Rates can also be custom-built as per Customers requirement

• Brand Name: enersys
• Minimum Order Quantity: 1 Unit