Sampling Instrument Dealers in Pune

• Dimensions: Pin 20 Mm Long X 8 Mm Dia Slug 33 Mm Dia X 8 Mm Thick
• Options Deoxidants: Titanium, Aluminum, Zircon and Plain
• Cardboard Tube Lengths: 1200, 1000, 900, 600, 400 or 200 Mm
• For Spectrometer Samples: Holder Clamping Portion Step Id 35mm X Step Length 5mm to Accommodate
• Coin Type Sample Dia: 33mm X 8 to 10mm Thickness
• Coin Type: Disc Polisher, Grinder Polisher
• For Metallography: Specimen Mounting Press

Specifications Assures uniformity of samples and eliminates composition changes Sample is free  from air and slag contamination The sampler consists of an inert sampling cartridge. It is designed to capture and deoxidize the molten metal below slag. After freezing, the sample is ready for polishing and spectroscopic analysis. The pin is to be used for gas analysis. Each sample is uniformly killed by measured quantity of deoxidant. The assembly includes an expendable cardboard tube assembly, which holds and protects the sample cartridge.

We are engaged in the manufacturing and exporting of unmatched quality Sample Coolers. Our Water Sample Coolers are in coil-in-shell type design which makes them ideal to make use of counter flow type heat exchange principle. Our Sample Coolers are extensively used in numerous industries such as Power, Pharmaceutical, Oil & Gas, Chemical & Petrochemical etc. We are well placed amid the leading DHx series Sample Coolers Manufacturers in Pune, Maharashtra. Features Built in safety relief valveDouble helix shape coilsIBR Approved Sample CoolersEasy to replace Benefits In-built safety relief valve to prevent accidents in the field in case of an (unlikely) event of coil failure. This kind of failure may occur due to chloride attack & stainless steel fails under this attack. It is always advisable to therefore have a built-in shell relief valve for human safety.Coils with double helix shape for more heat exchangeCounter flow technique of the sample and the cooling water, which ensures that the sample & cooling water flow in opposite direction, thus resulting in effective cooling of the sampleSample coils made of SS-316 and shell made of SS-304, which is best, suited for normal cooling water conditions. If the chloride content in the cooling water is above 35 ppm, other coil materials are also available such as Monel / Inconel etc.An association with the IIT for calculating and testing the performance, heat calculations and efficiency of our sample coolers. Sample cooler performance is validated by IIT – Power / KharagpurWe can offer IBR approved sample coolers as well, as our facilities are approved by IBRThe DHx series design which incorporates design suggestions given by IIT, is better in terms of saving in cooling water consumptionSample coils are easy to replace, as they are not welded to the top flange. This also provides easy maintenance of the cooler. With the presence of a drain plug at the bottom of the cooler, flushing out of cooling water and cleaning the cooler is effective and easy Applications DHx series specially designed for applications in Power IndustryPharmaceutical IndustryOil & Gas IndustryChemical & Petrochemical Industry

• Use: Liquid and Gaseous sampling systems
• Key Feature: Emission-free, Representative samples while providing operator safety. Easy to install and to operate with additional versions to meet customer needs.

• Type: Peltier
• Brand Name: M&C Techgroup
• Certification: CE
• Condition: New
• Maximum Working Pressure: 10 Bar

Pltier gas cooler ,dew point set up 5 Deg for sample gas ,The ECP 1000 gas cooler is used in gas analysis to lower the dew point of humid to avoid condensation in the analyser. An extremly stable gas dew point avoids water vapour crosssensitivity and volumetric errors.Electric gas cooler type ECP1000-G with Peltier element, electronically controlled to +5 °C, high/low temperature alarm with 2 changeover contacts, jet-stream heat exchanger made of Duran glass for 1 x 150 Nl/h, connections: sample gas: GL18-6 mm, condensate: GL 25-12 mm, power: 230 V/50 Hz or 115 V/60 Hz to switch over

The sample cooler is a compact unit, specially designed in accordance with ASME SEC-VIII, Div-1 & ASME PTC-19.11 to handle high pressure & High temperature applications. These coolers as designed for counter flow cooling to achieve very close temperature approach of the sample to coolant. These cooler as made up of double helix coil which meets ASTM D1192 requirements, fitted with a baffle for maximum efficiency. The shell is mounted through flanged connections and it can be removed without disturbing sample lines.   Features Single continuous stainless steel tube with no welded joints ensuring long maintenance free operation Designed to handle high pressure (250 Bar) & High Temperature (550Deg. C) steam samples Shell & Tube dCompact Design & truely counter flow. Very close temperature approach esign with removable Shell & Coil. Fully Stainless Steel construction Coil is not welded to shell. It can be replacable at site easily Online Shell cleaning without removing the cooler

sample preparation equipment, hardness tester, laboratory instrument

Gas Separators, Air Header, fermenters, breweries tank, Air Headers

liquid and water sample cooler, Gas Sampling System, pressing

sampling systems, turbine meters, totalizers, Flow Computers, Scanners