Sand Filters Dealers in Midc, Pune

These filters are the most popular method for removal of turbidity from water. The Pressure Sand Filter consists of a multiple layer of sand with a variety in size and specific gravity. These Filters are designed to remove turbidity and suspended particles present in the feed water with minimum pressure drop. These Filters are custom designed to suit the process requirement. These filters are offered in Mild Steel, FRP or SS construction with face piping and associated Valves. Construction The Pressure sand filter consists of a pressure vessel either vertical or horizontal, with a set of frontal pipe work and valves, graded silica quartz sand supported by layers of graded under bed consisting of pebbles and gravels, a top distributor to distribute the incoming water uniformly throughout the cross section of the filter, and an under drain system to uniformly collect the filtered water. Process Raw water flows down wards through the filter bed and as the suspended matter, which is treated by addition of a coagulant like alum or poly electrolyte, is retained on the sand surface and between the sand grains immediately below the surface. There is steady rise in the loss of head over a period of time and the flow reduces once the pressure drop across the filter is excessive.The filter is then taken out of service and cleaning of the filter media is effected by flow reversal also called as backwash. To assist in cleaning the bed, the backwash operation is sometimes preceded by air scouring by way of agitation through the under drain system. The air scouring agitates the sand with a scrubbing action, which loosens the intercepted particles. The filter is now ready to be put back into service. We Offer the following Range of Pressure Sand Filters: FRP Pressure Sand Filters up to 2000 mm Diameter Vertical MS Pressure Sand Filters up to 5000 mm Diameter Horizontal MS Pressure Sand Filters up to 4000 mm Diameter Pressure Sand Filter - Salient Features: Efficient Turbidity Removal MOC - FRP, MSRL, MSEP & SS Standard and effective multi grade sand media. Low Pressure drop across the vessel Optional Air scouring available. Manual, Semi Automatic & Automatic Options Fluid Systems offers Chemical handling and Dosing Systems for dosing Coagulants like Lime. Ferrous Sulfate, PAC, Alum and Feed Conditioning chemicals like Anti-scalant, Antioxidant, Membrane cleaners etc. Dosing systems are Skid mounted, compact and rugged, engineered to handle and work efficiently under highly corrosive and varying conditions. The areas of application include Raw Water Treatment Waste Water Treatment Reverse Osmosis Ultra Filtration Cooling Water Treatment Boiler Feed Treatment Typical Dosing systems consist of Metering type pumps with varied material of construction to suit the chemical handling. All Dosing Systems can be upgraded to a high level of automation for link up to a localized PLC or client's DCS as required.Pre-engineered designs conform to International safety norms with respective to spillage and containment.

Sand filtration is frequently used and very robust method to remove suspended solids from water. The filtration medium consists of a multiple layer of sand with a variety in size and specific gravity. Sand filters can be supplied in different sizes and materials both hand operated or fully automatically. Raw water pump is used for generating necessary operating pressure in the pressure sand filter. Raw water is passed through CHEMTRONICS Multigrade Sand Filter at a pressure of 3.5 kg cm ² to reduce the suspended solids present in the raw water.

We offer sand filter.sand filtration is frequently used and very robust method to remove suspended solids from water. The filtration medium consists of a multiple layer of high silica sand with a variety in size and specific gravity. sand filters can be supplied in different sizes and materials both hand operated or fully automatically. A special application of a sand filter is the removal of iron in surface and ground or well water. An iron removal installation consists of a aeration to oxidise and precipitate the iron and manganese, followed by removal of the precipitated particles with the sand filter. During service water enters from the top, travels through the filtering media & goes out from the bottom. The suspended solids in the water get trapped in the filter & we get clean clear water at the outlet. This accumulated dirt (suspended solids) needs to be removed otherwise the filter will get choked & will result in less treatment flow, damage to the filter, damage to the pump, etc. The cleaning operation of the filter is called backwash. This backwash operation needs to done once the differential pressure across the filter reaches 0.8 kgcm2 or 24 hours of service cycle whichever is earlier.

• Brand Name: Aquatech
• Application: Swimming Pool Filter
• Material: MS
• Usage/Application: Industrial
• Flow Rate: 0-500 m
• Vessel Diameter: 400-600 mm
• Vessel Height: 800-1000 mm
• Automatic Grade: Automatic
• Valve Size: 1/2 "

Sadgurruu Industrries is the most reliable name among the existing manufacturers and suppliers of Irrigation Sand Filters. We are stated on top in the market, based on the performance of our Irrigation Sand Filters. Use : To remove organic debris and particulates from waterFiltering water from ponds, creeks or irrigation ditchesCleaningWashing Benefits : Hygiene way of filtrationEnvironment friendlySmooth functioningLess time taking Properties : Simple & effectiveRequire very little attentionSand-filled tank to trap the sand particlesSignals when the tank needs to be back flushed by reversing the water flowMake the dust harder for the water to pass throughCauses the pressure in the tank to riseAccumulates dirt in the space between the sand particlesCleaning is done by back washing so that back-wash water must be filtered Applications : Power plantsRe-factoriesMetal industries

• Color: Red/Orange/Blue/Green
• Brand Name: Blue Magic
• Flow Capacity: 10/20//30/40/50 m3/hr

We provide you the sturdily constructed sand filters at the most competitive market price. Our sand filters are made up of high quality carbon steel pipes with 7 tank process powder coating. our sand filter is widely used for the removal of suspended solids from the water. The sand filter that we offer is durable and highly efficient in its performance. The media filters perform the filtration of water through a thick layer of graded particles. These particles can be sand, gravel or other granular materials. it is available in the sizes of 1020304050 m3hr.

Gravity Sand Filters, Raschig Rings, Side stream Filters

Resins, Demineralization Plant, Garnet, Non Return Valves, DM Plant

Effluent Water Treatment Plant, Effluent Water Treatment Plant

Reverse Osmosis Systems, ultra filtration systems