Sawing Machines Dealers in Mahatma Phule Peth, Pune

   Over-load switch with LED indicator, protects the motor and gears during        tough chain sawing application.   Chain brake activates in less than 0.1 seconds for added operator safety.   Automatic chain lubrication and oil level window.   Fitted with OREGON chain and guide bar.

The Slugger metal cutting saw is an incredible, high quality power tool. •Bevel up to 45degrees.   Bevel up to 45 degrees. Powerful 1200 watt motor Weighs only 13.6 pounds 7" blade diameter 2" depth of cut, 20mm arbor bore, overload switch Impact resistant carrying case, standard Blade options for mild steel, stainless steel and aluminium Faster, cleaner, safer and more affordable than other metal cutting equipment, the innovative SluggerMetal Cutter saw cuts steel as easily as plywood! Its specifically designed cover collects virtually allchips and sparks and the ability to bevel increases the tools capability in a way no other metal cuttercan match.

• Warranty: 6 months
• Brand Name: SHAPURA
• Power: 3 HP
• Voltage: 415 Volt
• Length of Bar: 100 cm (39.5"),122 cm (48"),150 cm (60)
• Cutting Capacity: 265 cm,335 cm,410 cm
• Oil Tank Capacity: 350 ml
• Weight of Machine: 32 kg
• Frequency: 50 Hz
• Minimum Order Quantity: 1 Set

• Weight: 14500kg
• SLOTTING WIDTH: 0.15-0.3mm

Yawei, No.1 Brand in China and globally for its high quality and high performance technology solutions.Yawei manufactures CNC turret punches, CNC press brakes, CNC shears, and Coil Metal Processing such as Cut to Length lines and slitting lines.China’s high quality manufacturer. Controller from Siemens.

EDS 200, EDS 400, EDS 600 & EDS 1000 After extensive R & D for the past 30 years in the field of Electric Discharge Machining, now Electronica is introducing High-Speed Sawing Machines using the Electric Discharge principle for cutting all metals, including exotic ones.Ideal for Aeronautical Engineering, Metallurgical and Research laboratories, Defence workshops.How it worksAn endless Mild Steel belt is used as an electrode to cut the workpiece. This Mild Steel belt rotates continuously over the two pulleys under tension. The thickness of this Mild Steel belt ranges between 0.5 and 0.9 mm and has the width between 19 and 40 mm and the length approximately 7500 mm.This electrode is fed to the workpiece with the help of Servo system. Water-based diluted Silicic acid soda (Sodium Silicate) solution or distilled water is used as dielectric. Performance Maximum cutting speed : 10 to 30 cm The cutting speed is calculated considering the cross section the workpiece that is to be cut. For example, to cut a slice out of square bar of 10 cm x 10 cm it will require roughly 10Depth of the heat-affected zone on the sawing surface : < 0.5 mm Applications Sawing of hard metals & exotic metals such as Titanium, Stainless Steel, Super Alloy, Inconel, Cast Steel etc. Sawing of fragile or soft materials, honeycomb, thin pipes etc. Works on all types of metals used in Aeronautical Engineering Most suitable for sawing materials such as, Tool Steel, Super Heat-resistant Alloy, Stainless Steel, Cast Iron and Cast Steel Advantages It can cut any electrically conductive material irrespective of its hardness. Sawing of spherical or slanting surface. Faster than band saw in case of hard materials. Minimum loss of material, as the cutting width is less than 1.5 mm. No deformation of the workpiece. Good sawing efficiency irrespective of the hardness and resistance strength. Only a small zone gets affected due to heat generation. Easy clamping due to very small sawing resistance which is 300 to 500 gm per sawing width of 10 mm. Very low running expenses. Operational Features Automatic belt tension adjusting system with a sensor in case of belt elongation. It is interlocked with the process to ensure cutting with higher efficiency. Pneumatic job-clamping system (optional) This clamping system is separate from the worktable. Hence, a continuous cutting and feeding is ensured without loss of time in clamping the workpiece. Motorised trolley / roller conveyor (optional) for continuous feeding of the workpiece for cutting Motorised Y axis movement (optional) with position feedback, allows precise positioning of the workpiece Y axis movement is disabled during the cutting operation, ensuring trouble-free cutting Separate strip butt welding system with built-in grinder, allows instant welding of electrodes Water cycle exclusively for aluminium cutting Safety FeaturesEnclosed work area with interlocked doors ensures higher operator safety Enclosed belt wheels with interlocked covers to ensure safe replacement of the belt Built-in fume extractor with coolant separating facility for fume-free work environment, without loss of the coolant Easy maintenanceSeparate automatic wash cycle for cleaning the work area automatically with a single-key operation Easily replaceable ceramic guides and carbon brushes allow easy maintenanceDielectric Pump unitSodium Silicate capacity : 285 Litres Water tank capacity : 285 Litres Standard accessoriesStrip butt welder Fume extractors Centralised lubrication system Automatic servo-controlled voltage stabiliser Manual Clamping set Optional accessoriesMotorised trolley / roller conveyor Pneumatic clamping system Types of controlFunctional control : Micro-controller based Servo control : PWM DC Servo Data input and outputSpecial-function sealed keyboard Hand-held remote Operating aidsAudiovisual alarm for fault indication Manual Up / Down switch Auto-positioning Gap control DRO for Z axis and optional Y axis