Scan Electronic Systems Shukrawar Peth, Pune, Maharashtra

Uniscan 3200 is a universal input scanner data logger. Type of input for each channel is programmable through keyboard separate alarm led indication is provided for each channel on front side. This unit can be multidropped on rs 485 bus.stored data can be printed dotmatrix printer and or transferred to pc in excel file format.

it is designed to tackle most common trouble-shooting during commissioning and routine maintenance. Model 45-B is truly hand held calibration instrument purposely limited functionally to simplify its use. With all its features 45-B battery operated field calibrator is an essential tool in a service engineer's kit.Potential free PT-100-RTD simulator. Higher accuracy, stability, noise immunity. Calibrated on certified multimeters with national traceability. Free calibration checks facility for five years. Guaranteed certification from authorised institutions like ETDC, ERTL, and IDEMI for specified accuracy. One year warranty.

Signal Isolator model PC-ISO is a highly reliable, accurate input-output isolator with fully flexibledesign approach. PC-ISO accepts ACDC voltage .or, ACDC currents as input and provide output in form of DC current or voltage in any specified range (standard range is 4-20mA). Rugged electronics of PC-ISO Signal Isolator provides galvanic and optical isolation of 1.5 kV which is 3 to 4 times higher than conventional isolators. The isolation is provided between input and output and between outputs in case of multioutput versions.

Baud rate: Auto baud selection from 300 to 115200 baud. Supply: AC version 230VAC 110VAC or DC version 24VDC. Communication: Bi-directional. Interfacing Field instrumentation with SCADA PLC DCS.

These converters are used for converting rs485 to rs232 and vice versa.it provides optical isolation between two ports thus protecting devices connected on both sides. Typically rs485 can be used for a cable distance up to 1.2km.converters are normally used for interfacing of serial communication between scada dcs and field devices like plc, controllers, smart transmitters etc.

Sensor & Transmitters are basic elements required Systems provides sensors transmitters for TEMPERATURE, HUMIDITY and PRESSURE. TEMPERATURE is the most commonly measured (Resistance Temperature Detector) and Thermocouples HUMIDITY sensor comes with its transmitter so as to provide commonly used voltage or current output It normally comes as a combined transmitter of for measuring any process variable. Scan Electronic temperature & humidity.

We are offering repeaters. Input: 2 wires or 4 wire rs485 output: 2 wires or 4 wire rs485

Ruggedised, State-of-the-art compact design. Four analog inputs plus four digital inputs plus four digital outputs. Two software writable channels. 4 and 12 digit resolution. Optically Isolated RS232 communication port with MODBUS RTU protocol for SCADADCS connectivity.

Ruggedised, State-of-the-art Micro-controller based system, Accepts Analog input mA RTD Volt Thermocouple in steps of 4 channels.Control Output for each channel, with indication on front - Optional, User configurable span for mA Volt inputs. Features:Data logging and Printing, Serial communication on RS232 port ASCII, Protocol with without backup recovery.

We are offering temperature indicators-mfm393 mfm393 is mass flowrate indicator-totalizer. It calculates mass flow based by providing temperature and pressure compensation for volumetric flow.

Ruggedised, State-of-the-art Micro-controller based system. Dual functionality Mass flow rate indication 8digit flow totalizing. Field settable flow totalizing rate. Optional Retransmission output corresponding to mass flow. Optional - Serial communication port with MODBUS protocol. User configurable ranges for all three mA inputs viz.Differential Pressure, Temperature, Pressure and Mass Flow rate range.

Model 45-M tabletop universal calibrator is widely used for in-house calibration and testing of process control instruments. It's simple operation, high accuracy and stability make 45-M an essential instruments in production units, calibration and quality control laboratories, and service stations in instrumentation field. With certification from authorised institutions like ETDC. ERTL, IDEMI Model 45-M can be used as certified source for calibration with traceability to national standards

Load Cell (Bridge) Converter Model: PC-SC-LC:Control Supply : 230 V AC, Single-phase ± 10 %. Excitation for Load Cell : 10.00 V DC (± 0.01 VDC). Output : 4 -20 mA (Load 500 W Max) or 0 -10 Vdc (2mA Max).

we are manufacturing this product load cell amplifie ..this specifications are:- Control Supply : 230 V AC, Single-phase ± 10 %. Input : mV (mV V) From Load cell Bridge. Excitation for Load Cell : 10.00 V DC (± 0.01 VDC) Output : 4 -20 mA (Load 500 W Max) or 0 -10 Vdc (2mA Max)

Hmt-01 is designed to accept hart signals from field instruments in multi drop mode and convert standard variables into fixed modbus address registers. This is useful to accept read exact values available for flow, pressure, temperature transmitters in digital form in the control room eliminating errors in analog input acquisition and process systems.

Hmi is designed to accept hart signals from field instruments in multi drop mode and convert standard variables into fixed modbus address registers. This is useful to accept read exact values available for flow, pressure, temperature transmitters in digital form in the control room eliminating errors in analog input acquisition and process systems.

Flow Indicator Totalizer model FIT is a panel mounted instrument with multi-functionality viz. Flow Rate indication, Flow Totalizing, batch counter & alarm for instantaneous flow. It accepts mA signal proportional to flow rate from flow transmitter. Flow Transmitter can be DPT with orifice assembly, Rotameter, Magnetic Flowmeter etc. with output of 4-20 mA. FIT displays instantaneous flow rate on 5 digit LED Display. Flow Rate and Totalizer range can be configured as required even at site. Totalizer is a 8 digit LED Display. Totalizer cab be reset manually or remotely as optional. The unit incorporates two relays, from which one can be used for alarm for instantaneous flow & one for batch counter or both for alarm. On each set point one contact output is given, which can be used for control or hooter applications.

Flow indicator totalizer :fit is a panel mounted instrument with multi-functionality viz. Flow rate indication, flow totalizing, batch counter & alarm for instantaneous flow.

Flow Indicator Totalizer model FIT (48*96) is a panel mounted instrument with multi-functionality viz. Flow Rate Indication, Flow Totalizing, batch counter & alarm for instanteous flow. It accepts mA signal, linear square root, proportional to flow rate from flow transmitter. Flow Transmitter can be DPT with orifice assembly, Rota meter, Magnetic Flow meter etc. with output of 4-20 mA. FIT (48*96) displays instantaneous flow rate and totalizer range can be configured as required even at site. Totalizer can be reset manually or remotely as optional. The unit incorporates one relay operating on flow rate or totalizer set point which can be used for control or hooter applications.

We are offering falcon 100 is a single channel analog input to rs485 rs232 output module, which is best suitable for scada applications. The output is on rs485 rs232 with modbus rtu protocol which is a industry standard protocol. Optionally ascii protocol can be provided.

Standard features like Tabular Reports, Online graphs, History graphs, Alarms, Mimics.Batch Recording optionally available. Auto Email reports that can be shared with other computers on LAN. 21CFR version with Audit Trail and validation available.