Scientific Instruments Dealers in Hadapsar, Pune

Viscosity is the property of the fluid by which it resist flow due to internal friction. Used for determining viscosity of cut - back bitumen and road oil. Viscosity is measured by determining the time taken by 50 cc of the material to flow from a cup through a specified orifice under standard condition of test. GENERAL DESCRIPTION & SPECIFICATIONS: The apparatus consist of bath with cup of 10 mm orifice and sleeve stirrer with ball lifting clip and ball The bath is fitted with an immersion heater to take the water to the required temperature and a drain valve. The temperature is controlled by energy regulator or voltage varrier.(extra cost) The assembly is kept on suitable stand with leveling screws. Suitable to operate on 230 V.50 Hz. AC single phase. OPTIONAL ACCESSORIES: The following accessories and consumables are not part of the standard supply and are mandatory for the testing work. 1) Thermometer IP 8C/9C/10C. 2) Measuring Cylinder 100 ml. 3) Mechanical / Digital Stop Watch. 4) Silver plated orifice cup 4mm. 5) Solvent (Benzene/Toluene) for cleaning. NOTE: The Tar Viscometer is also available for multiple test fitted with Digital Temperature indicator cum controller and FHP electric stirrer. Supplied with Tar Cups of 10 mm and 4 mm orifice with valves.

Suitable for measuring Brake Horse Power of different types of Prime movers like Diesel , Petrol Engine, Electrical Motors, Vehicles. These are sluice gate operated Dynamometer. The rotor and stator rings are cast from Phosphor Bronze material. Power absorption unit is mounted on sturdy Cast Iron base plate with help of trunnions. Load indication is in digital form with a load cell. Calibration setup is provided for periodic check-up in order to ensure accuracy. Principle Of Operation : Water acts as cooling and loading medium. Running rotor causes water to whirl in chamber. Braking energy absorbed converts to heat dissipated.Advantages : Sturdy & Robust Design, Fast Response & Accurate calibration, Dynamically balanced rotors, highly economical and simple design.Load Control : Load Control is effected by adjusting the sluice gates to and fro by means of chain and sprockets. This is achieved manually with the handwheelModels : TM15. TM50, TM150, TM300 are suitable for 15, 50, 150, 300 BHP capacities at 1500 RPM

Mini Seis III Pro Digital Seismograph Ground Vibration MonitorThe Mini-Seis III Pro is the ultimate vibration monitor. It is suitable for geotechnical, environmental, blast monitoring and more. It features sampling rates of up to 16K over 4 or 8 channels. There is also a 128K single channel sample rate. The unit has a 16 bit dynamic range and is very low power. Recording modes include waveform, histogram, histogram/waveform and manual. The waveform record duration can be set from 1 to 120 seconds at all sample rates. The histogram period can be set at 1, 10, 20, 30, 40, 50, 60 or 900 seconds. Data can be downloaded to a computer or thumb drive using high speed USB. Remote access by RS232 with baud rates up to 460800 is supported. The unit has over 3.5 GB of memory and can store up to 4096 waveform and histogram records. The user interface is simple and easy to navigate. Soft keys provide additional options depending on the screen being viewed.  Optional GPS is available to store location coordinates and provide highly accurate clock syncing. For advanced monitoring the instrument supports the use of non-standard sensors. White can provide a hardware interface for accelerometers, strain gauges, hydrophones and nearly any other AC or DC coupled sensor. Multiple units can be connected together in a master-slave arrangement where the master unit triggers all of the slave units simultaneously. This feature provides a common time base useful for determining propagation velocity, structure phase response and more.

• Viscosity Range : 71 - 455 cSt centi strokes
• Usage/Application: Laboratory
• Model Name/Number: B4
• Volume: 100 ml
• Number Of Cups: 1

• Brand Name: Technomech
• Application: Industrial
• Minimum Order Quantity: 1 Piece

high voltage equipment, Electric Actuators, Motorized Valves

• Speed: 12000

Facilitating testing of Diesel, Gasolene,CNG engines widely used in Automotive, Marine, Industrial & Combat Engines for Production, Endurance & Overhauling application. Electro-less Nickel Plating for cooling passages in Loss Plates. Descaling Unit Available.

Voltage Regulators, ALTERNATORS, component parts, DC Motors, Starter Drives

chassis dynamometer, transmission test rig, engine mounting cast iron stand

Laboratory Instruments, school instrument

Air Gap Eddy Current Dynamometers, Engine Testbed Accessories

general laboratory instrument, scientific testing instruments

dynamometer