Scientific Instruments Dealers in Khadakwasla, Pune

(20 products available)
  • Brake Disc Calipers

    Brake Disc Calipers

    1,700 - 1,800 Per Piece

    • Size: 0-5inch, 10-15inch, 15-20inch, 20-25inch, 5-10inch
    • Type: Caliper Disc Brakes
    • Material: Aluminum, Cast Iron, Metal, Steel
    • Shape: Round
    • Certification: ISI Certified
    • Color: Black, Golden, Gray, Silver
    • Condition: New
    • Frequency: 50Hz, 60Hz
    • Packaging Type: Cartoon
    • Feature: Corrosion Resistance, Durable, Easy Installation, Flawless Finish, Heat Resistant, Precisely Designed, Robust Design
    • Warranty: 1yrs
    • Torque: 0-1000nm, 1000-2000nm, 2000-3000nm, 3000-4000nm
    more..
  • Eddy Current Dynamometer

    Eddy Current Dynamometer

    Get Price Quote

    The dynamometer comprises: The basic electro-mechanical unit mounted on trunnion bearings A 60 teeth gear-wheel mounted at the non-driving end of the dynamometer to sense the dynamometer- speed Mounting arrangement for magnetic pick-up and load-cell Temperature sensors to monitor loss plate temperature Pressure switch for low-water pressure alarm at water inlet Flow Switch for low water flow alarm at water inlet Pressure gauge for water-inlet pressure indication Adaptor plates for propeller shaft coupling Junction box

    more..
  • Best Deals from Scientific Instruments

  • Flame Photometer

    Flame Photometer

    Get Price Quote

    Flame Photometer Microprocessor Flame Photometer (Graphical Display lnbuiH Printer) Four Element measurement in a single aspiration (Na, K, Li, Ca and Ba). Calibration curve fit routines first order and second order. Data displayed in concentration units i.e. ppm meq, automatic filter selection; auto calibration feature. Printer attachment, PC connecting compatibility, Sample data storage more than 500 results. Alphanumerical key board for easy data entry. Graphical LCD display thus easy to read, Curve calibration using upto 5 standard, Multiple calibration curve saving facility, Stanless steel burner. Auto Gas Cutoff in case of power failure. Provided with2Filters Compressor.

    more..
  • DIGITAL THERMO ANEMOMETER

    DIGITAL THERMO ANEMOMETER

    15,000 Per Piece

    • Color: Black, White, Yellow etc
    • Material: Plastic
    • Resolution: 0.01 m/s
    • Type of Sensor: Wind Sensor
    more..
  • viscosity cup

    viscosity cup

    Get Price Quote

    • Material: Metal
    • Feature: Easy To Use, Superior Finish
    • Application: Laboratory
    • Durability: Long Life
    • Resistivity: Rust Resistant
    • Performance: Optimum
    more..
  • DC Energy Meters

    DC Energy Meters

    Get Price Quote

    DC Energy Meters, Electrical Panels, Duel source Prepaid Metering Systems

    more..
  • Current Indicators

    Current Indicators

    18,000 Per Piece

    • Body Material: Stainless Steel
    • Brand: PTC
    • Power Source: Electric
    • Display Type: Digital
    • Frequency: 50 Hz
    • Voltage: 230 V AC
    • Display Size: 0.5 inch to 1 Feet
    more..
  • Cup Counter Anemometer

    Cup Counter Anemometer

    19,588 - 21,690 Per 1 Nos

    1 Box (MOQ)

    • Country of Origin: India
    • Type: Cup Anemometer
    • Material: Metal, Copper
    • Application: Wind Speed
    • Weight: 2 Kg
    • Range: 80 km/hr
    • Brand Name: Ramkala Manufacturers

    The Cup Counter Anemometer is used for measuring the wind speed. The instrument has a cup wheel comprising of three conical cups with bedded edges and free to rotate in a horizontal plane. The cup wheel spindle is connected by worm gearing to a revolution counter mounted inside a water proof housing. The gear ratio between the cup and counter spindles is so chosen that the run of the wind is shown directly in kilometers and tenths. The counter mechanism has five figures and reads upto 9999.9 km. before repeating itselfMaterial : Cup  -  Copper Sheet/ Aluminium 0.71 Mm Thick Cup Arm & Socket  -  Aluminium Alloy Body & Lid  -  Cast Aluminium/ Brass Centre Spindle  -  Stainless Steel Rod Worm  -  Manganese Bronze Alloy Worm Wheel  -  Hard Brass Other Parts -  Made from Non Rusting Material Cup Rotar Assembly : Each of the three rotor cups shall have an internal Dia. of exactly 127.0 mm and be semi conical in shape. The spindle is supported on two bearings, ball bearing at top & thrust bearing at bottom. The assembly is made as per the instruction laid in IS - 5912Worm & Worm Wheel : The worm wheel shall engage true with the threads on the worm without friction. The worm wheel shall be secured to the shaft of the counter by means of a steel pin. The gearing ratio shall be such that 32 revolutions of cup rotor produce one revolution of the worm wheel.Body & Lid : The body and the lid are made from Aluminium casting and glass window only viewing the five figure wheels of counter. Each anemometer will be supplied with 18" long M.S. bar for fixing in concrete.Counter : It is a non-reset, direct drive revolution counter adding one counter for each one tenth revolution. The figures of the counter shall be 7mm high is of white pigment colour on black background.Anemometer General Description : The wind speed is measured using anemometer. The instrument has a cup wheel consisting of three conical cups with beaded edges, free to rotate in a horizontal plane. The cup wheel spindle is connected by worm gearing to a revolution counter mounted inside a waterproof housing. The gear ratio between the cup and counter spindles is so chosen that the run of the wind is shown directly in kilometers. The surface wind for synoptic purpose is reported in knots. To determine the wind speed at the time of observation, take two successive readings of the anemometer at an interval of three minutes. Subtract the first reading from the second one and multiply the difference by 20. This gives the mean wind speed over a period of three minutes in kilometers per hour. To obtain the mean windspeed in knots multiply this by 0.54. Specifications : Material : Cups - Copper or aluminium sheets 0.71 mm thickness Centre spindle - Stainless steel rod Worm on center spindle - Cut from manganese bronze alloy Worm wheel - Hard brass Dimension : The general arrangement and dimensions of the cup counter anemometer shall be as shown in fig. 7.1.Counter : Any suitable non reset direct-drive revolution counter adding one count for each one-tenth revolution of the drive shaft in one direction or ten units for each complete revolution shall be used.Accuracy : When tested in a wind tunnel, the speeds calculated from the readings of the anemometer counter shall agree with the true speeds within tolerances specified below - Speed - Tolerance Below 10 km/h - ±1 kmph Above 10 km/h - ±10%

    more..
  • Internal Dial Caliper Gauge

    Internal Dial Caliper Gauge

    Get Price Quote

    • Features: Long lasting life , Resistance against corrosion , High durability .
    more..
  • Anemometers

    Anemometers

    Get Price Quote

    We are engaged in providing range of Anemometer to our clients for accurate measurements. These equipments can be used to measure wind factors. These equipments are manufactured with the help of latest technologies but they are very easy to use.

    more..
  • Scientific Instruments

    Scientific Instruments

    Get Price Quote

    With the great industrial experience in this domain, we are providing a comprehensive range of Scientific Instruments to clients. Our range of Scientific Instruments is sourced from the market leading vendors to make sure high efficiency and service life. Owing to the diverse qualitative features like rigid construction, low maintenance, and user friendliness, these Scientific Instruments get highly demanded among clients from all over the world.

    more..
  • Air Velocity Meter

    Air Velocity Meter

    Get Price Quote

    • Display Type: LCD
    • I deal in: New Only
    more..
  • Engine and Chassis Dynamometers

    Get Price Quote

    Engine and Chassis Dynamometers, Eddy Current Dynamometers

    more..
  • Engine Dynamometers

    Get Price Quote

    Engine Dynamometers, Spm Machine, special purpose cutting machines, Jigs

    more..
  • Transient Dynamometers

    Get Price Quote

    Transient Dynamometers, fuel meters

    more..
  • laboratory process control instrument

    Get Price Quote

    laboratory process control instrument

    more..
  • Electrical High Voltage Sensors

    Get Price Quote

    Electrical High Voltage Sensors, AC Current Sensors

    more..
  • Dew Point Hygrometers

    Get Price Quote

    Dew Point Hygrometers, flameproof hand lamp, programmable timers

    more..
  • Hall Effect Experimental Setup

    Get Price Quote

    Hall Effect Experimental Setup, Two Stage Reciprocating Air Compressor

    more..
  • Dc Energy Meter

    Get Price Quote

    Dc Energy Meter, Energy Management System, multi function energy meters

    more..
Filter by Locality
top