Sealant Dealers in Pune

• Brand Name: Dr Fixit
• Country of Origin: India
• Packaging Size: 0-10Kg, 10-20Kg, 20-30Kg
• Usage/Application: Residential And Commercial Use
• Purity: 90%, 99%
• Grade Standard: Chemical Grade

• Brand Name: TriKol
• Brand Name: TRIKOL
• EXCELLENET ADHESION: COHESION

One Part Low Modulus Polyurethane Sealant The product is suitable for sealing joints in pre-cast elements, external walling, curtain walling and cladding, panel walls, window and door perimeter sealing etc.

• Easy assembly: Due to high lubricating property, Loxeal Thread Sealants aid in easy assembly of pipes and fittings by reducing the friction.
• High Quality Seal: Seal formed by Loxeal Thread Sealant are highly reliable even under the most extreme environments and maintain the seal up to the burst pressure of most piping system. Unlike a PTFE tape or yielding elastomer (O-ring) Loxeal Thread Sealant work in both St
• Torque Independent: Seal formed by Loxeal anaerobic Thread Sealant are effective even if pipe fitting is not torqued properly.
• Non Contamination: Loxeal Anaerobic Thread Sealant do not contaminate the fluid. Unlike PTFE tape that can clog or contaminate the system due to shredding or tear during assembly, Loxeal Anaerobic Thread Sealant are totally contamination free.
• Pipe Positioning: Unlike PTFE tape and other conventional seals, Loxeal Anaerobic Thread Sealant allows the fittings to be positioned in any direction and angle. This eliminates excessive joint stress or loose fittings.
• Controlled Strength: Loxeal Anaerobic Thread Sealant are available in various grades. They are formulated for easy disassembly with normal hand tools even after years of service. For permanent sealing, specific formulation is available too.
• Cost: Loxeal Anaerobic Thread Sealant offers lowest application cost per joint over its lifetime Vs. any of the other pipe sealing methods.
• Fluid Compatibility: Loxeal anaerobic Thread Sealant cure to form a thermoset plastic that resists most industrial fluids, gases and chemical compositions. Offers unmatched performance under aging.
• Ease of application: Loxeal Anaerobic Thread Sealant are very easy to apply. One can apply manually on site or using an automatic dosing system in an online assembly setting. No special skill is needed to use Loxeal Anaerobic Thread Sealant.
• Easy Clean up: Loxeal Anaerobic Thread Sealant do not cure outside the joint, hence the excess material is very easy to clean.
• Wide operating Temperature: Loxeal anaerobic Thread Sealant operate successfully within the wide temperature range of (-50°C to 230°C)

We offer Polysulphide Sealant, which is perfect for low modulus pitch. Polysulphide is also suitable for sealing horizontal movement joints in concrete paving associated with airfields, motorways, bridge decks, car parks, warehouse and industrial flooring.  

We are a recognized Manufacturer & Supplier of Silicone Sealant. The Silicone Sealant we supply is formulated using high quality material under the guidance of experts. The Silicone Sealant we offer has excellent adhesive properties and widely used for various construction glazing applications. We supply Silicone Sealant in meticulous packaging to avoid any damage. Minimum Order Quantity : 1000 units

• Application: Robotic RTV Applicationand Oil Seal pressing
• Design Elements: Machine Frame structure, Component loading fixture, seal pressing arrangement, pne
• Component: Banjo Beam axle
• Cycle time: 50 secs/component

• Form: Liquid
• Grade Standard: Industrial Grade
• Packing Type: Tin can
• Shelf Life: 12 Months
•  :  

• Brand Name: UGAM

1) The extensive range of Acrylic Sealant offered by us is procured from UGAM CHEMICALS. 2) These are excellent material used for the expansion joints of the buildings and also work as a crack filler and concrete repair paste. 3) Acrylic Sealant has elastic properties and doesn’t allow the cracks to open again after the movement between the surfaces. 4) Further, the Sealant also helps to reduce the development of further cracks and also increases the life of building or product on which it is applied.Features1) Can be applied over terraces to fill the cracks and make them water proof2) Used as crack filler3) Used as bathroom tile joint sealThe technical specification is correct to the best of our knowledge and under test conditions and we do not accept any liability towards misuse and contents of it. Product must be tested for specific use prior to use.

• Shelf Life: 12 Months
• Usage: Construction
• Raw Material: Silicone
• Use: Used for sealing purpose
• Form: Paste
• Features: Heat Resistant
• PackagingType: Plastic Bottle

• Features: High quality , Exact composition, Simple to use ,Long shelf life ,Temper proof packing , Accurately formulated

• Color: Clear, White Black paste
• Brand Name: Pidilite
• Packaging Type: Sealant
• Grade Standard: Industrial
• Packaging Size: 280ml
• Features: Single component RTV, Excellent flexibility with anti sag property, High-temperature resistance

• Brand Name: Loxeal
• Color: White
• Grade Standard: Industrial Grade
• Adhesion Properties: Pressure Sensitive
• Chemical Composition: Epoxy
• Form: Liquid
• Solvent Free: Yes
• Origin: Synthetic

• Packaging Type: Tube
• Shelf Life: 1 year
• Brand: Dr Fixit
• Packaging Size: 250 g
• Application Industry: Jointing
• Surface Of Application: Ceramic
• Fixture Time: 1 hr

GEETA-FS9 Floor Screed is a unique cementitious product which is very simple to use by just adding water to give an excellent mix. It provides excellent workability for casting onto new or old concrete floor. GEETA-FS9 Floor Screed is a blend of cement, graded sand and binders & Speciality additives The Floor Screed is suitable for use as a normal screed on new concrete substrate or to repair old damaged substrates in industrial floors, docks, go-downs etc. It can be used for internal as well as external applications.

Indigo Paints Knifing Paste Filler is an alkyd based putty ideal for levelling metal &wooden surfaces. Surface Preparation & Application: The Surface to be puttied should be cleaned free of rust, dirt, loose material, grease, wax etc. An appropriate Indigo Wood / Metal primer should first be applied.For Metal Surface , Indigo Knifing Paste Filler Grey should be applied using a putty knife on primed surfaces to even out the dents on the sheet metal and blowholes on casting before the finish paint is applied.For Wooden Surface, Indigo Knifing Paste Filler White should be applied using a putty knife on a primed surface to even out and fill up the grain in wood before the finish paint is applied. If the filling required is thick, for both wood & metal, this should be done in two or more thin layers and not in one thick layer. the puttied surface should be smoothened with abrasive paper grit no.320 before application of finish coat. If thinning of Knifing Paste Filler is required, use only general purpose thinner. Advantages Easy to apply Good Filling property

• Maximum Thread Size: 3"
• Temperature Resistance: 400 F (204 C)
• Maximum Pressure Resistance (psi) / Cure Time: 10000 psi / 72 hrs.
• Substrate to be Sealed: Stainless Steel, Aluminum
• Available Sizes: 50 ml, 250 ml

Description White Paste Maximum Thread Size 3" Temperature Resistance 400 F (204 C) Maximum Pressure Resistance (psi) / Cure Time 10000 psi / 72 hrs. Substrate to be Sealed Stainless Steel, Aluminum Instant Low Pressure Seal No Available Sizes 50 ml, 250 ml Withstands temperatures up to 400 F with excellent solvent resistance. Locks and seals tapered pipe threads and fittings, including high pressure applications. Disassembles with hand tools. ABS Approved.