Sensors Dealers in Paud Road, Pune (53 products available)

• Features: Accurate and repeatable measurements from highly reflective to dull surfaces,Dual output-Analog and digital , Data export-Acquired data can be stored in widely supported .
• Measurement rate: Up to 40,000/ sec.
• Extended Range Voltage Output: 0 to 10 V
• Software Selectable Filters: 0.1Hz, 1Hz, 25Hz, 200Hz, 1kHz, 4kHz, 20kHz
• Nominal Laser Wave Length: 670 nm
• Storage Temperature Range: -20 deg C t o 70 deg C

• Part Number: 4835
• Mounting Type: Magnetic, Adhesive, Stud
• Interface Type: Voltage, Current, Serial
• Brand Name: TE Connectivity
• Frequency Response: 0-1000 to 0-5000 Hz
• Overall Acceleration Range: +/- 5-10000 g

• Features: 3-colors selection by Bank changeover switch.

The CS-D3 series color sensor is designed to detect the colors only which were recognized by an initial setting (teaching).Mix teaching enables to combine some max.min. values which were obtained by separate sample color teaching.

• low power consumption: longlife

Themf010 serieslow temperature oxygen sensors is designed to determine the oxygen concentration in air or inert gas mixtures with temperatures of-100 ã�â°c to 250 ã�â°c [-148 ã�â°f to 482ã�â°f]max. the mf020serieshightemperatureoxygen sensors is designed to determine the oxygen concentration in air or inert gas mixtures with temperatures of-100ã�â°c to400ã�â°c [-148ã�â°fto752ã�â°f]max. these products are particularly suitable for measuring oxygen in areas that are not easily accessible, or inclosed systems, such as ventilation pipesand containers. The mf010and mf020 series may both be supplied with a measuring range.

• Type: Pressure Sensors
• Material: Plastic
• Application: Automobile Use, Industrial Use
• Color: Black, Blue, Red, White
• Condition: New, Used
• Power: 15w, 20w, 25w
• Warranty: 1year, 2years
• Alarm Range: 1.5mtr, 1mtr, 2.5mtr, 2mtr

Jt-121 is paddle wheel type polymer body flow sensor suitable for clear liquid application. Being light weight and compact, installation is easiest, still robust. Vats jt-121 is most simple and most economical flow sensing device for clear liquids.proven and long lasting bearing materials has made this sensor a common choice of all oems. Jt- 121 sensor can be installed in wide range of pipe sizes. Variety of materials is available in installation fittings like abs, pvc, ms, and ss. These fittings include tees, saddles, with specific weld ends, thread ends or flange ends and weldon adaptor.

• Brand Name: N. P. Electronics
• Condition: Good
• Product Name: Chlorine Sensors
• Usage: Used in conjunction with pressure sheath
• Feature: High accuracy repeatability and long service life
• Place Of Origin: Pune,Maharasthra

Made from supreme quality stainless steel, the Chlorine Sensors are used in conjunction with pressure sheath. Our company shares glorious credentials with best Suppliers and Exporters of Chlorine Sensors from Maharashtra, India. High accuracy repeatability and long service life makes our Chlorine Sensors the first choice among customers. We source these Chlorine Sensors from trusted vendors only. Bulk orders of the Sensors are also catered by us within the stipulated time.

We are looked upon as one of the most preeminent Resistance Temperature Detector Sensors Exporters and Suppliers in India. The RTD Sensors offered by us are made up of excellent quality materials and latest technology that ensures high durability, tensile strength, easy operation, accurate result and low maintenance cost. Customers from various national as well as international markets are placing bulk orders for the RTD Temperature Sensors due to the unmatched quality and unsurpassable performance. Moreover, the RTD Sensors have gained appreciation in the market as it complies to the international standards. RTD (PT 100) is available in 2 wire and 3 wire connection generally 3 wire is used. RTD is used for temprature range -2000C to 5500C also available in simplex type and dupliux type. Max. Temp. : 800, 1000, 1500 & 18000C Types of Thermocouple : K-Type Chromal + ve / Alumel - ve : K type thermocouple is standard thermocouple use upto 12000C while stable in oxidizing atmosphere and protection tubes are mostly use for this thermocouple.Blonut Type : These type of thermocouple are used for 0 to 4500C. Is is generally used in egnition moulding machine.J- Types - Iron + ve / constant - ve These thermocouple are used from 0 to 6000C. Thess thermocouple are very economical these are used mostly in plastic industries.R - Type - Platinum- Platinum - Rhodium 10% & 13%These thermocouple are used for high temprature application used to 15000C in this thermocouple ceramic alumina protection tubes must be used.

Level ranges from 1mWG to 10 mWG Various outputs including Volts and mA. Accuracy

Capacity : 5 / 10 /25 kgf · Overall Accuracy : ± 0.25% FSD Application · For measurement of radial force in various automotive application.

Microcontroller based Temperature Scanner is designed for fast and accurate measurement and control of the Process Temperature. The Scanner monitors & displays the Process Temperature as well as does ON OFF Control according to the Programmed Set Point.

• Country of Origin: Made in India
• Material: Stainless Steel
• Process Temperature: 80 Deg C
• Packaging Type: Box
• Product Type: Sensor
• Mounting Type: Top Mount

• Brand Name: Baumer
• Voltage: 220 - 240 V
• Frequency: 50Hz
• Material: Metal
• Finish: Polished

• Features: Efficient, High strength, High performance, Low maintenance, Longer life, Rugged built.
• Analog output: 800…1100 mbar, 0 to 5 V
• Accuracy: +/- 0.3% at 25 C deg
• Humidity Limit: 0% RH to 100% RH (at pressure inlet)
• Supply Voltage: 8 to 24 VDC
• Operating Temperature Range: -40 C deg to +85 C deg
• Dimension: Length 85 mm, Diameter 82 mm,
• Weight: 150 g
• Housing: ABS

To have complete control of the utilities in the plant, it is very important to measure & monitor their consumptions. Steam being the one of the costly utilities in the process plant a proper measuring system must be in place. Unless & until we monitor, we cannot optimize its usage.

Simply stated, Accutech is a line of battery-powered wireless sensor networks; a family of measurement and control tools used wherever challenging telemetry applications are found, including stranded measurement points, hazardous locations and mobile equipment. Characteristics Low cost of: • Deployment: no wires, trenching or conduit required • Operations: limited maintenance required Easy to install and use: • Fully integrated power, communications and instrumentation • Mounts on any structure, quick configuration from keypad • Zero maintenance: 3+ years of maintenance-free service (up to 10 years depending on data rates and battery options). Most reliable, longest reach system on the market: • Superior range with 900MHz and 2.4GHz FHSS radios (over 3000FT, 1000M) • Superior resistance to interference and noise • Deterministic battery life and months of warning when battery needs replacement

Many applications require continuous temperature monitoring of bearing housing. The PT 100 Bearing Temperature RTDs due to their linear resistance-temperature characteristic are used for temperature sensing, measurement and control of these devices. The output signal of RTD BTD is given to a temperature indicator or a temperature controller for achieving the desired measurement and control.

The S type load cell with Low Deflection & Creep, Excellent Overload Capability is specially designed for aggregate weighing to give Standardized output when Multi- load cells are used.  Application:1.    Hanging type aggregate bin weighing2.    Hanging type water and cement bin weighing Standard Features:1.    Low profile design2.    Low Deflection and creep3.    Standardised output for Multi Load cell application4.    Excellent overload capability Options:Capacity range available in Kg:25/50/100//200/500/750/1000/1500/2000

Wide temperature range Available in K / R / S / B type Assured thermocouple polarity Available in ceramic / fire retardant / splash proof / paper body Available in various lengths and diameters / sizes Cost effective Expendable immersion thermocouple Quick Dependable Highly accurate temperature Guaranteed electrical contact throughout the dip Fast thermocouple response. Easy to operate with very low price. Single or multiple use. Improved design enabled increased lance life   The Knowledge of liquid metal temperature is essential for the production and quality control of steel, cast iron and non-ferrous alloys. The molten metal temperature must be within strict limits to achieve the optimum quality before the heat or melt can be tapped or cast.   APPLICATION FIELD Molten metal temperature measurement in the production and refining processes of iron, steel and other ferrous and non ferrous metals in BOF, EAF, Induction Furnace, holding furnaces, Ladles, and so on.

The electronic circuits and LED display are often incorporated for real time application system by using PCB and MEMS technology. In this prototype, electroluminescence display and touch sensitive sensor circuitry is printed with the help of screen printing technique and also formulation of low temperature solder paste for mounting of electronic components on glass. Electronic components referred to SMD type and printing of solder paste patches by using stencil printing on glass. The electronic circuitry for printed EL display and touch sensitive sensor (capacitive) shows the main advantage where it can also be re-programmable with respect to sensitivity. El driver and cap sense IC of 0.5 mm pitch is mounted with the help of conventional printing using solder paste. Capacitive based touch sensor is developed with the help of conductive ink (Ag) and dielectric inks were used for bridging over silver conductive structures. Low temperature solder paste composed of metallic based polymer binded to increase the mounting adhesion as well as with low resistance after drying. Hence it protects from short circuit when it is in “ON” mode. The electrical and mechanical characterization was occurred and it proves that this technology may give supportive solution to overcome PCB technology. The following figure shows the glowing of EL display when it’s in “Touch mode”.

We are offering temperature sensor. A device which gives proportionate resistance output with respect to temprerature. We can offer both positive temperature coefficient & negative temperature coefficient. rating - 12v & 24v

Curtis Steering Sensor Units replace conventional steering columns on steer-by-wire electric power steering systems. They are fully integrated electromechanical units consisting of a shaft, bearings and sensors. Steering Sensor Units convert the mechanical movement of the steering wheel into a dual-redundant electrical signal that provides steering wheel position, steering speed and direction data to the steering control system.

FMS force measuring rollers of the RMGZ100 to RMGZ 800 series are used to measure the tension in ropes, cables, wires and narrow web materials. There are four types of Force Sensor for Wire and Cables are namely RMGZ100 Force Measuring Roller, RMGZ300 Force Measuring Roller, RMGZ400/600 Force Measuring Roller and RMGZ800 Force Measuring Roller. We are an established Exporter and Supplier of Force Sensor for Wire and Cables in India.

FIBER OPTIC LIGHT SENSOR, selectron timer, Proximity Switches

Rotary Position Sensor, throttle position sensors, motorsport sensors

Color Sensor, angle measuring system, fiber optics sensor, Magnetic Sensor

UV Sensors, Actuators, Ignition Transformers, flame switches, Flame Sensors